Acer aspire e1 532 touchpad does not work. Why doesn't my laptop touchpad work? If only scrolling or finger gestures do not work

The touchpad, or touchpad, is the most important component of all Lenovo laptops. This is a compact version of a USB mouse. On the one hand, this is a very convenient thing, since it eliminates the need to use a wired mouse, but on the other hand, using the panel is not always comfortable, because it is located near the function buttons.

Today we’ll talk about how to enable the touchpad on a Lenovo laptop if it stops functioning.

You can activate the touchpad on Lenovo using the following methods:

The simplest technique is to use hotkeys "F" + "Fn";
Through "Control Panels";
Activation in BIOS. To do this, go to the settings menu, select the section called "Internal pointing device" and expose "Enable";
It is possible - through "Dispatcher". If the required peripheral device is displayed there, you can reinstall the drivers or update them;
In addition, it cannot be ruled out that the touchpad could simply break. In such a situation, you should simply take the device to the service center technician.

All these methods work perfectly on Windows 10 and Windows 8 operating systems.

Now let's take a closer look at how to enable touchpad on a Lenovo laptop using the above methods.

Using hotkeys

Let's look at this method using the Lenovo G50 as an example. To enable the touchpad on a Lenovo G50 laptop, you must simultaneously press on the device "F8" And "Fn". Using the same keys you can turn off the touchpad.

This combination can only work on Lenovo models. If the specified key on the keyboard of a Lenovo laptop does not function for some reason, then you should contact a technician.

Via "Control Panel"

To connect the touchpad on a Lenovo laptop using this method, go to "Control Panel", select a section there "Mouse", and there - "Device Settings". In the tab you will find two functions: "Activate" And "Deactivate".

Place the required checkboxes and the sensor setup on your Lenovo laptop will be completed.

Using BIOS

You can activate the touch mouse on a Lenovo laptop through the BIOS menu. To do this, when booting the device, click the button "F2" or "Del". Then in the window that appears, select the section called “ Internal Pointing Device". Replace there "Disabled" on "Enabled".

The main activation/deactivation system shows all the main components of the device. Therefore, from here you can control their functioning, and the touch mouse is no exception.

To enable the Lenovo touchpad in the BIOS, you need to:

Reboot the laptop. When the system boots, click the button "F2" or "Delete" to get into the BIOS;
Enter the tab called "Advanced» , select there "Internal Pointing Device"" Set a parameter for it "Enabled";
To save, click simultaneously "Y" And "F10".

In different BIOS versions, the names of the partitions vary. For this reason, it is better to find instructions for using your device on the Lenovo Internet resource and study it carefully.

Driver problem

Drivers may have failed due to a failure due to reinstallation of the operating system. Without them, the panel may not function partially (for example, only gestures are broken) or completely.

Often, a driver disc comes with your laptop. But if there is no such disk, then the drivers should be downloaded from the manufacturer’s resource. You can find them there in the section called "Service" When loading, you should pay attention to the following data:

Windows bit depth (x64, x32, x86);
Version of the installed operating system;
Device model.

Maximum compatibility can be achieved only if all three parameters completely coincide. However, there are some exceptions: if the OS bit depth must match 100%, then a different version of Windows is allowed. For example, drivers from Windows 8 will function perfectly on Windows 10, but provided there are no updates for version 10.

If you download drivers in the form of an executable file (*.exe), you can install it like a program using the installation wizard. If the latter does not start, you should add drivers manually. The action plan is:

Go to the control panel, set "Big Badges", launch the device manager.
Using the cursor on your Lenovo laptop, open the section called "Mouse" and select there "Touchpad". Right-click on it and select "Properties».
Make sure the device is functioning properly.
Go to "Drivers" First of all, try to roll back the software by clicking on the button of the same name. If this does not work, select "Update».
A window for selecting update modes will appear. If the necessary software has been downloaded, then select the manual installation option.
Assign a path to the drivers, wait for the installation to complete.

After reinstalling the drivers, reboot the laptop. During startup, check the panel: if you still cannot disable/enable the touchpad on your Lenovo laptop, then most likely the reason is mechanical damage. The following may be broken:

A microcircuit that ensures the functioning of peripheral devices. In this case, as a rule, LAN and USB do not work;
Sensor;
A cable that connects the touch panel to the motherboard.

You can disassemble the laptop yourself, following the instructions supplied with the device. However, it is better not to do this, since unprofessional intervention can lead to aggravation of the problem.

We have told you about the most effective methods for activating the touchpad. If none of them helped solve the problem, then you should turn to the experts for help. Perhaps the panel is simply faulty. The cause of the malfunction may be due to moisture getting inside, poor contacts, or mechanical failures. Service center employees will conduct a thorough diagnosis, identify the cause of the malfunction and promptly fix it, bringing your laptop’s touchpad back to life.

Have you turned it on, but the cursor on the screen does not move? In fact, it is not necessary to immediately sound the alarm and run after the mouse.

Although, if the problem is in the device software, then you will have to use it for a while.

The touchpad may not work due to mechanical damage, but it may also be due to an error in the system. However, you need to figure out what exactly the nature of the malfunction is in your case.

Problem Definition

If you notice that the touchpad is acting strangely, try clicking on different parts of the panel.

In some cases, the cursor responds to movement, but is delayed or stuck. See exactly where the best returns are.

Also check that the buttons on the touchpad are working properly.

In addition, you need to check if the touchpad is connected. Try turning it on.

This is done in the following way:

1 Press the Fn key combination with one of the F1-F12 keys. Different models have their own key meanings. For example, if the touchpad on an Acer laptop does not work, you can press FN + F7

2 If you have a dedicated power button, press it.

3 Use a special utility. It is usually displayed near the clock at the bottom of the screen. However, this method is not suitable for all laptop models.

4 Turn your mouse on and off, the touchpad should turn on automatically.

5 Go to device Manager. Look at the state of the touchpad – turned on or not.

It’s quite rare, but it still happens that the touchpad is disabled in the device’s BIOS. To do this, when you turn on the laptop, hold down the keys to go to the BIOS and go to the “Advanced” section. Find “Internal Pointing Device” in it and check that the option is enabled (value “Enabled”).

If everything works, but is slower than usual, try cleaning the touchpad with a cloth and a cleanser.

The problem may be that you put a greasy stain on the panel or something got inside.

Cleaning may not help when the problem is that the system settings are incorrect or the touchpad is damaged.

After connecting the mouse, go to Control Panel, find the item “Mouse”. There, try changing some sensitivity settings.

Alternate between using the mouse and touchpad to determine the best settings.

Settings

When the cursor itself moves normally, but additional functions such as scrolling or pressing keys are not performed, then the problem lies in the software.

First, update the drivers for your touchpad. This can be done by going to the laptop manufacturer's website. After that, restart your laptop and try the touchpad again.

If some functions malfunction, go to the corresponding section on the control panel to see if everything is configured correctly.

You can also resort to additional software to configure the touch panel.

No recoil

If you are sure that everything is in order in terms of software, then the task becomes more difficult.

The fact is that the cause of the malfunction may be mechanical damage, which requires the intervention of specialists from a computer service.

The touchpad on a laptop is in contact with the motherboard through a cable. It is usually attached to special fasteners.

However, due to the fact that the laptop is usually constantly moved and transported, this cable is damaged.

For example, during transportation, the laptop may shake or be subject to blows from the side.

The bag does not guarantee complete protection. Accordingly, the first thing to do if the touchpad malfunctions is to look at the condition of this cable.

Touchpad repair

In case of mechanical damage to the touch panel, there is no other option but to go to a service center.

If you can't afford it yet, connect the mouse to your laptop.

True, this option may only be suitable if only the touchpad is acting up, and not other elements in addition.

Of course, before you give your laptop for diagnostics, carefully inspect it yourself so as not to overpay to specialists.

However, be careful - amateurs are unlikely to be able to repair a laptop; they can only cause the performance of the entire device to deteriorate.

The service center will inform you about the cost of repairs. If the problem is only in the cable or other elements, the price of the work should not be high.

The most expensive work is to restore or replace the motherboard.

disabled touchpad;

mechanical damage to both the cable and the motherboard.

Regarding the software, you can figure it out yourself. Just update everything and check the settings. Mechanical faults can only be dealt with by a service center specialist.

As a rule, minor repairs do not take much time, and the cost is also quite affordable. The situation only gets worse if the motherboard and other components are damaged.

Any equipment is subject to breakdowns during operation. And mechanical parts, especially those used to the maximum, are the weakest link and the first candidate for breakdown.

Most ordinary laptop owners do not use a keyboard as regularly as a mouse or touchpad.

Therefore, breakdowns of the latter are the most common occurrence.

The problem of a non-working touchpad can occur even in the most popular laptop manufacturers: Acer, Asus, Lenovo and Dell.

If When you press the touchpad or its buttons, the laptop does not react at all– don’t rush to take it to the service center, maybe everything is not so bad.

The fact is that:

Almost all laptop models can disable the touchpad after pressing a special key combination (it could be pressed accidentally);
Some laptop models have an option in the touchpad driver settings that disables the touchpad automatically if any pointer (mouse, trackpad, etc.) is connected to one of the USB ports or you type on the keyboard (so as not to accidentally move the pointer to another place);
Sometimes standard drivers may not fit the touchpad (often certain options, such as side scrolling, gestures, etc., do not work, but a complete set of software with a touchpad button driver may not install or not fit your hardware, although still highly depends on the installed operating system and its settings);
The pointer (touchpad) could be disabled in the BIOS, like any other PC peripheral.

Touchpad buttons do not work, how to turn them on

What can you do to fix these problems:

Find the key combination that turns off the touchpad, on the keyboard and press it. On most laptops, this is accomplished by a combination of two Fn buttons (in the lower left corner of the keyboard) and a touchpad icon (the touchpad disable button is usually located on the function keys at the top on “F1” - “F12”). The action icons for the Fn key are the same color. First press Fn, and then the button with the desired action.
Make sure that a third-party (external) mouse is not currently connected to the PC(this can be not only a wired connection method, but also wireless - via a USB adapter or other communication channels available on the laptop: Bluetooth / Wi-Fi).
Open Device Manager and make sure all devices are healthy and working. There are no disabled devices or devices without installed drivers (they are designated as unidentified, have a specific icon and are placed in a separate group). If there are any, try using System Update (relevant for Windows 7 and higher) or try to find drivers through Device Manager (via the corresponding menu item). Downloading the latest driver versions is available only with active access to the Internet.
If the laptop came with a disk with drivers, you can try to install them from it. Famous manufacturers offer to download all the necessary drivers from the official website (you need to know the device model, OS version and its bit depth).
You can check if the touchpad is disabled in the BIOS. To do this, you need to enter its settings (before the OS loads, the corresponding key combination is pressed; it may differ for different device models and manufacturers). In the sections you need to find the correct settings item. In most cases, the universal solution will be to reset to default settings (default settings).

Complex solutions if the left or right button on the touchpad does not work

If all the above methods did not help. Do you know for sure that Touchpad buttons stopped working without any compelling reasons (no one gained access to the laptop without your supervision, new devices, including mice, were not connected, etc.), then only “heavy artillery” remains.

You need to disassemble the laptop and fix the problem yourself or take your laptop to a service center.

If a service or workshop is not for you, then we continue further.

The most common causes of breakdowns may be the following:

Ingress of water, tea, coffee and other accidentally spilled liquids;
Disconnecting the touchpad cable (due to mechanical impact - fall, impact, etc.);
Premature wear of buttons (due to regular loads or long-term normal use).

In all cases, you will need to disassemble the laptop. Remember that tampering with the inside of the device will void the manufacturer's warranty.

The technology for disassembling the device greatly depends on the manufacturer and model of the laptop.

Recently, manufacturers are becoming less and less concerned about maintainability and ease of access to individual components of laptop PCs. And therefore, to access the touchpad unit, you may have to disassemble the entire laptop. Although in some cases you only need to remove the keyboard (it is secured with special latches) or just the bottom cover of the case.

First of all, you should make sure that the touchpad cable is connected securely, has not jumped out, the contacts have not been erased, the clip is securely fixed, and there are no breaks in the cable itself.
Secondly, it is worth paying attention to the presence of mechanical particles or liquids in the buttons and contacts of the touchpad buttons.

If, after wiping with alcohol, drying and proper assembly, the touchpad still does not work, the only option is to completely replace it.

A working unit can be removed from a donor (for example, from a similar broken laptop) or purchased from a specialized online store.

VIDEO INSTRUCTION

Useful touchpad control programs

If you own an Android smartphone, then the latter can easily replace not only the TouchPad, but also provide you with ample opportunities to remotely control your laptop.

Applications such as Remote Droid, Wi-Fi Mouse Remote, Mouse Kit and others can turn your smartphone into a computer mouse, touchpad, keyboard or even a media player control panel.

For iPhone and Windows-based smartphones, you can look for analogues.

The connection method (via the Internet, Wi-Fi, Bluetooth, etc.) depends on the capabilities of the installed program and the smartphone itself (it is worth highlighting such possible problems as lack of support for a multi-point sensor, lack of Bluetooth or outdated versions of communication models, etc. ).

The simplest solution is to buy a mouse. After all, any Touch Pad can be easily replaced with a mouse. Many laptop owners do exactly this immediately after purchasing a laptop - purchase a comfortable and fast mouse.

But if you don’t have a mouse at hand, or a smartphone, and the touchpad has stopped working, its functions can be replaced with a digital input block on the keyboard:

Firstly, you can only use the keyboard to move between active windows, menu items, etc. Thus, the “Windows” button opens the “Start” menu, “Tab” switches active buttons/elements, “Ctrl” and “Shift” allow you to select the required elements, the spacebar marks ticks/checkboxes, etc. There are other Windows hotkeys.
Secondly, in the Ease of Access Center (relevant for Windows 10, 8, 8.1), you can configure direct control of the mouse pointer (section “Make it easier to use the mouse”, block “Enable pointer control from the keyboard”. Depending on the additional settings of this parameter, the pointer will move by pressing the arrows in the digital input block (to the right of the main keyboard of the laptop or can be combined with the main keys, works after pressing “Fn”). The click is triggered by pressing the central button (the number “5” in the block on the right, not to be confused with next to the numbers at the top). Pressing the right button will be answered by the “menu” key (to the right of the space after “Alt”).

Some laptop users find it much easier to work with a touchpad rather than a peripheral mouse. The touch panel gives the device the mobility for which it was designed. If you use it, you can perform work tasks anywhere: in a cafe, park, public transport and many other places. But if the touchpad on your laptop does not work, you will have to carry a wired or wireless mouse with you and look for additional space to use it. In order not to experience inconvenience, it is necessary to discover the cause of the problem and deal with it.

The touchpad does not work because it is disabled using hotkeys

To avoid touching the touchpad while typing, many users disable it temporarily using hot keys. If you disabled the touchpad and forgot about it, it will not work until you enter the command with the keys again. Typically, the touchpad is turned on using the Fn and F 1-F 12 key combination. The exact command will depend on the laptop model and manufacturer:

Fn + F 7 – for Acer (only this combination is suitable for the Aspire line; for others you can try Fn + F8);
Fn+F5, Fn+F8 – for Lenovo;
Fn+F5 – for Dell and Toshiba;
Fn+F6, Fn+F5 – for Samsung.

Similar keyboard shortcuts are used for other laptop models. Some gaming models have separate physical keys that control the touchpad. Next to them there is usually a pictogram in the form of a small window. In modern HP laptops, the touchpad is turned on and off by holding your finger for a long time in its upper left corner.

Features of setting up Synaptics touchpads

Panels from the manufacturer Synaptics are installed on different laptop models. They are universal, but require additional configuration.

Through the "Control Panel" go to the "Hardware and Sound" section.
Select "Mouse".
Go to the "Options" tab.
In it you will see the name of the touchpad and its current status. Activate your device.

This touch system also has the ability to turn off the device using a special button. Often this is what causes deactivation.

Driver failure

If the touchpad on your laptop has stopped working, then the next thing you need to do after trying to turn it on again is to check the drivers and update them if required. To do this, you will need to go to Device Manager and find your touch input device. Then act according to the circumstances.

Removing unnecessary components

View the list of drivers. Perhaps the system installed the device twice, so now it does not know which device to contact. In this case it is necessary:

call the context menu for the first device;
select “Remove device”;
do the same with other mice;
to restart a computer.

After rebooting, the drivers for the touchpad will be installed automatically. The error will be fixed.

Upgrade or Rollback

If the device is reflected in a single copy, then you can try to roll back or. It is imperative to do this if an icon in the form of a yellow triangle with an exclamation mark appears next to the name of the touchpad. To change the configuration you must:

Right-click on the device name.
Select “Properties” from the list that appears.
Go to the "Driver" tab.
Choose an action according to the situation. In most cases, you need to stop at the “Update” item. If the problem occurred after updating the operating system, click on the “Roll Back” button.

If errors occur during driver updates, you need to download the appropriate package from the laptop manufacturer's website. It will contain a utility for controlling the touchpad and all the necessary components for it. You need to search for the necessary drivers based on your device model.

Disabled in Mouse Properties

If the touchpad does not work on a Windows 10 laptop, then you need to see if it is disabled in the properties panel. To fix the problem you need to follow the instructions:

Open the "" menu and enter mouse in the search bar.
Go from the list of found results to the mouse settings.
Go to the advanced options section and then to the Touchpad tab.
Click on the "Enable" button.

The settings panel may not be Russified, then you need to open the Device Settings tab. To turn on the device, select the Enable button.

The touchpad is interfering with the touch service

Nowadays, hybrid devices that combine a touch screen and a touchpad are in fashion. But such laptops are still imperfect and may have a conflict between the touch screen and the panel. In this case, at first the touchpad on the laptop does not work well, signals from it pass through with a delay, and then it may fail completely.

If you need a touchpad and are ready to use the hybrid device as a simple laptop, then you need to disable the touchscreen. For this:

Call up the “” window by simultaneously pressing Win + R.
In the window that appears, enter services.msc.
A list of services will appear in front of you. From these you need to select Tablet PC Input Service or a similar service name.
Right-click on this or a similar line and select the “Disable” option.

After this, the touch screen will not work, but the touchpad will begin to function. If you want to use all the properties of the hybrid model, then you can update or roll back the drivers for the screen and mouse (we talked about how to do this above). If the components are configured correctly, conflict between devices will be suppressed. As a last resort, remove both devices from the manager, and then restart your computer.

Touchpad disabled in BIOS

If you cannot find the touchpad in the list of devices or it does not work despite all the manipulations, then it is worth checking the BIOS settings. You may have deactivated the device yourself while changing the boot order or disconnecting other devices. Also, in some cases (especially after a laptop battery breaks down), the BIOS settings are lost when the device is suddenly turned off or when a new operating system is installed.

It’s easy to enable the touchpad through the BIOS; to do this, follow the algorithm:

While the laptop is booting. Typically, the shell is launched by pressing the Del or F 2 button. These buttons should be pressed immediately after the start boot screen appears.
Using the arrows, go to the Advanced tab, and then go down to the line Internal Pointing Device.
Look at the value next to this line. If it says Disable, then you need to change it to Enable.
After this, all you have to do is save the settings using the keyboard shortcut F 10+Y.
The computer will restart again, check the operation of the touchpad.

Managing tabs in the BIOS most often occurs using arrows, but there are deviations from this option. There are prompts at the bottom of the screen for users to navigate to the desired tab and save changes.

Touchpad hardware problems

If none of the above activation methods helped, then most likely the problem is hardware. The first thing you need to remember is whether the laptop has been taken apart recently. If you carried out repairs and did not use the touchpad after it, then there is a chance that the problem is simply a disconnected cable. Otherwise, the problem may arise due to:

contact with water on the sensor;
physical impact on the panel;
oxidation of the cable contact due to temperature changes (if you bring the device from cold to warm, and then immediately turn it on).

The weak point of touchpads of all models is the cable. When a small amount of moisture gets in, it quickly oxidizes and stops transmitting signals. Initially, the touchpad on a laptop may partially fail: scrolling or keys do not work, and then it will completely fail.

More complex hardware faults are a split sensor and a breakdown of the south bridge (the chip responsible for the operation of peripheral devices). In the first case, the sensor will need to be replaced with a block, in the second, a specialist will repair the motherboard directly.

Now you know why the touchpad on a laptop does not work, and most importantly, you can deal with it. In most cases, the failure is software and can be fixed by the user; if you suspect that the cause is hardware, then you should contact a service center. Remember that disassembling the device is easy, but putting it back together correctly will not be easy. Share this article with your friends so that they can enjoy all the features of the laptop freely. If you have any questions, ask them in the comments.

Before moving on to the question of how to enable or disable the touchpad on a laptop, you should clarify what it is – a touchpad. Laptops, netbooks and other similar portable devices (for example,) usually have a built-in computer mouse. This built-in mouse is not at all like the usual computer mouse that you can move around the table and press buttons.

The mouse built into portable laptop computers has a completely different design. If it moves on the table, then the built-in mouse of laptop computers stands, as they say, tightly. But you can move your fingers along it, which in terms of response is completely similar to the movement of a regular computer mouse on the table.

Pros of a touchpad or what is a touchpad for?

This fixed design of the built-in mouse is convenient for portable computers, where you need to have as few moving parts as possible. Precisely because the computer itself is portable, it is not advisable to have anything else moving in it.

With this built-in mouse, you can not only move your finger, but also perform many other actions. For example, you can tap on the built-in mouse, which will be similar to pressing the left button of a regular computer mouse. In more advanced computers, especially MACs, you can use the built-in mouse to rotate the image, zoom in or out, and perform many other convenient actions using the built-in mouse.

Also, the built-in mice of laptop computers have left and right buttons, completely similar to the left and right buttons of a regular computer mouse.

Actions on the built-in computer mouse of portable portable devices are most often performed by touching your fingers on a rectangular area on the computer case. Therefore, such a mouse received the name “touchpad” from the English words “touch” - touch and “pad” - platform. In simple language

“touchpad” means “to touch a special pad with your fingers.”

And speaking in technical language, then

"touchpad" means "touch pad".

Disadvantages of the touchpad or how the touchpad interferes with the user

Any convenience can always have a downside - inconvenience. This “law of harmfulness” did not bypass the touchpad (touchpad, built-in mouse of laptop computers).

The fact is that usually this touch panel is structurally located just below the keyboard of a computer (laptop, netbook, tablet computer, etc.). When working with the keyboard, you can, unbeknownst to yourself, accidentally touch the touchpad, the same panel (platform) located below the keyboard.

The touchpad can perceive any touch not only with a finger, but also, for example, with a shirt cuff, as a signal to action. This false signal will send a signal to the computer from the touchpad, for example, to move the mouse cursor up, down, left or right.

And now imagine, for example, that you are typing text. And suddenly, at some point, the mouse cursor “moves” to a completely different place in the text, where you continue, suspecting nothing, to continue typing the text. Not everyone knows the method, so when typing, all attention is usually directed not to the screen, but to the keyboard. And you simply don’t notice that the cursor has long since moved away, and the text is printed completely in the wrong place where it should be.

Unpleasant? Still would. And then you have to edit everything, look for where the text “went”. Extract it from there, move it to where this text belongs. It takes a long time and sometimes tediously to fix everything.

Therefore, developers of portable laptop computers have long been concerned with the problem of temporarily turning off the touchpad, touch panel, and built-in mouse. If, of course, the user needs it. This function of turning it off (and, of course, turning it on if the touchpad is needed again) is very convenient. Therefore, it is useful to know and be able to use this function.

At home, where a laptop can be placed on a table, many people prefer to use a regular computer mouse. Only in this case, the enabled touchpad can greatly interfere, so the question arises: how to disable/enable the touchpad?

Manufacturers have worried about the function of turning off the touchpad. For this purpose, laptops have a special key or key combination. There is no need to resort to any special hardware or software.

1 option on how to enable or disable the touchpad on a laptop

Some laptop models have a small indentation in the corner of the touchpad. This is the touchpad enable/disable button. By pressing it twice, you activate the touchpad or disable it if it was enabled. This is very convenient, although not all models of portable laptop computers have such a button.

Rice. 1. How to enable or disable the touchpad on an HP laptop.

IN HP laptop There may be a sensitive spot on the left top corner of the touchpad. If double tapping doesn't help, try another option. Hold your finger in this place for several seconds (Fig. 1).

2 Hotkeys to enable or disable the touchpad on a laptop

In other laptops, to enable/disable the touchpad, you need to press the key combination Fn and one of the top row F1-F12. The Fn key is usually located in the lower left corner of the keyboard. Which of the F1-F12 keys to press can be judged by the icons printed on them, which are made in the same color as the Fn key.

The icon for turning on/off the touch panel usually looks like this touch panel - a rectangle with rounded corners (an image of a “pad”), under which two small rectangles are shown (like buttons, the left and right mouse buttons, see Fig. 1) and above everything this is a cross, like the letter “x”, meaning “turn off”. But there may be other touchpad mnemonics. Here computer manufacturers are trying their best.

For laptop Sony Vaio You can disable/enable the touchpad using the Fn+F1 keys. We pressed the two Fn+F1 keys once and thereby disabled the touchpad. When you press Fn+F1 again, the touchpad will be turned on again.

Rice. 2. For a Sony Vaio laptop, you can disable/enable the touchpad using the Fn+F1 keys.

Hotkeys to enable or disable the touchpad for different laptop models:

Acer Fn+F7

Samsung Fn+F5

Sony Vaio Fn+F1

Toshiba Fn+F5

Asus Fn + F9 or Fn + Fn 7

Lenovo Ctrl + F6, or Fn + F6 or F5 + F8

Option 3: enable/disable the touchpad through Settings in Windows 10

On a Windows 10 laptop, you can use another option to enable or disable the touch mouse. To do this, open Settings (Fig. 3):

Rice. 3 (click to enlarge). Search for Settings in Windows 10.

Number 1 in Fig. 3 – Click on the magnifying glass icon to search for Settings on your device.

2 in Fig. 3 – Type “parameters” without quotes.

Number 3 in Fig. 3 – The search result will be visible at the top – this is “Options”. Click on the inscription, the parameters window shown below will appear (Fig. 4):

Rice. 4. Settings - Devices in Windows 10.

Open “Devices” (Fig. 4). A window will appear in front of us with a list of devices in the left column (Fig. 5):

Rice. 5. Enable the touchpad on your Windows 10 laptop.

Click “Touchpad” (1 in Fig. 5). Next, check that the switch is in the “On” position. (2 in Fig. 5). Then the panel will be turned on.

Also check that there is a checkmark next to the “Keep the touchpad on when a mouse is connected” option, if necessary. If you uncheck the box, the built-in touchpad will be disabled automatically, without warning, when you connect an external mouse to the laptop. In principle, this mode of automatically turning off the built-in mouse may be useful for someone.

And if you need to turn off the touchpad, turn the switch to the “Off” position. (2 in Fig. 5).

Option 4: look for the touchpad in the BIOS settings

If for some reason the methods described above cannot enable or disable the touchpad using a special button, or using , or using the Winndows 10 settings, then this can be done through BIOS settings.

To access these settings, you need to hold down the F2 or Del key while starting the laptop. As a rule, when turned on, a hint is displayed at the bottom of the screen which key to press. We must remember that this hint appears for a very short time. And you need to press this key exactly at the moment when the hint is displayed. Otherwise, it will be impossible to enter the BIOS setup program; you will need to restart the laptop.

In the BIOS settings we find the Pointing Device item (literally “pointing devices”). Change its value to Enabled (literal translation “Enabled”) if you want to enable the touchpad, or to Disabled (literal translation “Disabled”) - to disable the device. Then exit with save (usually this BIOS setup menu item looks like “Save & Exit” or “Exit with Saving”) for the changes to take effect.

You need to be careful with BIOS settings, especially if you don’t know what this or that option is for. It is even possible to overhaul your computer's settings to the point where it can no longer be repaired. This is how it is, this BIOS is “insidious”.

5 Laptop instructions to help

Another way to find information on the question of where you can disable/enable the touchpad on a laptop. For this, the instructions for your laptop may be useful. It is usually stored not in paper, but in electronic form. You can find the instructions on the hard drive C: of the laptop, usually in the “Documentation” folder, but not necessarily in it.

When all 5 options don't work

So, the touchpad is easy to enable and disable. But if you can't turn on the touchpad using the methods described, then it's probably

the device is faulty,
or not installed, for example, as a result of reinstalling the operating system. I wanted, say, instead of the “native” XP (that is, “hard-wired” into the device by the manufacturer at the time of its sale) to install seven, or instead of the “native” seven – eight or ten.

But that, as they say, is another story.