MMS are being read. Why can't MMS messages open on my Android phone? Setting up MMS on Android on your own

Owners of smartphones and push-button phones are accustomed to the fact that MTS MMS settings are installed automatically. This service is taken for granted and does not require manual intervention to activate. But at the time of sending the settings, the device’s firmware may have malfunctioned, a network failure or other technical problem may have occurred. How to make MMS work in such a situation, read below.

Before receiving MTS MMS settings, check whether you have access to global network. Without it, sending and receiving multimedia messages is impossible. Usually the Internet connects automatically at the moment of the first SIM registration base station, but sometimes you need to do it manually using any of the methods:

1. Send a USSD request using the symbol combination *111*18#.
2. Send the text “111” by SMS to 2122.
3. Go to the “Personal Account” section of the company’s website and activate the service.
4. Install the My MTS program from the AppStore or Google Play and enable the option there.

If the MMS settings did not arrive after installing the SIM card, you can order them like this:

• Send a message to subscriber 1234 (blank or with any text).
• Dial 0876.
• Go to the official website and submit the parameters from there.

Read more about the latter method. Enter the URL mts.ru in your browser, click on the “Help” -> “Order auto settings” button. Next, enter your subscriber number and take a test to prove that you are not a robot. That's it, you can click on the button that sends the request.

When you use any of the methods, a service SMS with settings will be sent to your phone.

How to set up automatic MMS on MTS

Setting up MMS on MTS via service SMS works like this: you receive a message with auto settings for the phone. The device will offer to apply them, with which you must agree. After this, you should be able to send MMS. If sending does not work, restart your phone.

When the reboot is complete, send a test MMS to the dedicated number 8890. Money is not debited from the account for the test MMS; it is necessary to confirm that the parameters have been accepted and the profile has been activated. From this moment on, the network equipment will know that your device can receive multimedia messages.

What happens if you set up “cellular” but don’t send MMS to 8890? Then any message intended for you will be saved in the database of the operator’s Internet portal, and will not be sent to your phone. Instead of a full-fledged MMS, you will only see a text link where you can view it.

Setting up MMS manually

Sometimes auto settings may not arrive or may not be activated due to technical reasons. Then, to be able to send and receive multimedia attachments, you must specify all the parameters manually. The procedure may differ slightly for different devices (for example, for an iPhone and an Android smartphone).

We go to the general settings menu, look for the section related to the Internet (data transfer) and create the following profile (fields in different models may be named differently):

1. You can enter any name, usually something like “MTSMMS”.
2. We indicate the page http://mmsc.
3. Login and password - write mts in both fields.
4. Proxy server - 192.168.192.192
5. The port for regular push-button phones is 9201, for smartphones - 8080.
6. Access Point Name - mms.mts.ru.

The contents of additional fields can be left “by default”. A complete set of manually entered parameters for various models devices are presented on the operator’s website. In the screenshots below you can see examples of settings for Android and iOS. After entering all the data, you should select new profile, then reboot the device and send a test MMS to 0890.

MMS is a special system for transmitting media content. According to the MMS 2.0 standard, the volume of one multimedia message should not exceed 999 kilobytes. But each operator can choose for himself maximum size sent data.

Instructions

At modern level information technologies sending multimedia messages between subscribers, it would seem, has already outlived its popularity. However, in the absence of access to wireless internet, this method of information exchange becomes the only alternative. That is why it is important for any user to know what to do if the question arises: “I can’t send MMS from Android” and how to solve it.

Problems with sending or receiving messages are not always associated with a technical malfunction of the phone. This possibility should not be completely excluded, but first it is better to perform a preliminary diagnosis and network settings. Please note that for a new SIM card, settings come automatically the first time you use it in a smartphone. If your SIM card has been working for many years, this function may be lost for it. It is also worth taking into account other possible causes of failures.

Why doesn't this function work:

1. This service is not available for some regions. To clarify the information, it is better to contact your cellular representative directly.
2. You also need to request automatic settings from the operator. For this it is important to inform exact model your phone. After receiving the data in a separate message, you should activate the service according to the attached prompts. If your smartphone allows for the use of two SIM cards, the setup is carried out separately for each number.
3. Your recipient may have a different tariff plan that does not support this function, or using other network parameters.

Often automatic updates cannot be used or they do not work correctly. For such cases, it is advisable to configure the communication parameters yourself. This algorithm provides some differences for different operators.

Solution to this problem

If you cannot use the ability to automatically configure network parameters, you must enter everything yourself. To do this, it is important to adhere to the given algorithm of actions, focusing on your phone model and the selected connection.

Steps for manually entering network parameters:

• In the menu section of your smartphone you need to find “Settings”.

• In this list find the category " Wireless network" Communication parameters are indicated here, including data transfer and wireless Internet use.
• It is necessary to activate the “data transfer” item if it is not active.
• Return to the "Wireless Networks" menu and find the access point. Typically, the phone will provide two connection options, one of which will be responsible for the mobile Internet, and the second - directly for the ability to send multimedia files.
• For a phone with two SIM cards, you must also indicate the number to which the service will be connected.

If impossible self-configuration You can contact your operator at the specified number or visit service center(representation) in person. For a communications center specialist, such procedures will take a minimum of time and present no difficulties.

Not sent from Tele2

If MMS messages are not sent from Android to Tele 2 subscribers, you need to check the correctness of the information provided. It is also worth asking your subscriber in advance about setting up a similar function on his device.

How to set up message transmission:

1. Call number “679” and act according to the instructions received.
2. Register in " Personal account» on the resource, after which you will familiarize yourself with the settings section by activating the service.

If the manipulations are ineffective, you should use manual entry. You will need to enter the specified information in the appropriate sections.

Template to fill out:

• You can come up with a name yourself.
• APN - mms.teleru.
• MMSC - http://mms.tele2.ru.
• Proxy - 193.12.40.65.
• Port - 8080 (9201).

After entering the information, you need to restart the device and also check the function of sending and receiving messages.

Difficulties in sending messages for MTS

MTS subscribers use this service after activating the function in several ways.

Execution algorithm:

1. Send an empty SMS field to the short number “1234”. After this, the network parameters will also be sent via SMS notification.
2. If you can access the Internet via a PC, it is better to create your account on the website of a company that provides such communication opportunities. This will allow you to find out the latest news and connection promotions, monitor your expenses or order a tariff change. You can also order service connection in the “Internet Assistant MTS” section. Address of the site of interest: https://ihelper.mts.ru/selfcare/.
3. For direct communication and clarification of details of interest, you can also use the service feedback on the website, or you can call “0876” and receive verbal instructions for such cases.

If it is not possible to use the options described above, it would be more advisable to enter the information yourself in the specified section.

When entering manually, use:

• APN - mms.mts.ru.
• Login (username) - mts.
• Password - mts.
• MMSC - http://mmsc.
• Proxy - 192.168.192.192.
• Port - 8080 (9201).
• Access point type (APN) - mms.

After completing all sections, be sure to restart your smartphone so that the changes made are saved and updated. After that, check the sending function: send any multimedia file to the nearest device of a friend or relative. If it is impossible to perform or if a failure appears on the screen, repeat the specified steps or check that they were performed correctly.

Can't send MMS from Megafon

Megafon subscribers also have access to services for sending and receiving multimedia files. They are also used for this different ways connections, and in the appropriate sections of the menu indicate the information below.

When entered manually, indicate:

1. Name - come up with any suitable name.
2. APN - mms.
3. Login - leave blank.
4. Password - leave blank.
5. MMSC - http://mmsc:8002.
6. Proxy - 10.10.10.
7. Port - 8080.
8. Access point type (APN) - mms.

Register your account on the official website: http://moscow.megafon.ru/help/settings/. If it is preferable to receive information via SMS, you must send a message to the number “5049”, and interaction with the operator is carried out using direct number"05002".

It is impossible to send or receive messages on the Beeline network

The no less popular operator Beeline also took care of opportunities for its customers. There is an official website for this with the ability personal registration and obtaining information of interest about new tariffs and services of the company. It is located at: https://uslugi.beeline.ru/. Manually entered parameters will also change slightly.

When manually entering data, the following parameters are used:

• Name - come up with any suitable name.
• APN - mms.beeline.ru.
• Login - beeline.
• Password - beeline.
• MMSC - http://mms/.
• Proxy - 192.168.94.23.
• Port - 8080.
• Point type (APN) - mms.

Communication with the operator is free of charge short number"060432". If none of the proposed options “works,” it is more advisable to contact the Beeline center in person.

What to do if it says failure when sending MMS from Android

Among possible reasons, why MMS is not sent from Android, we can also highlight some software glitches of the system. Despite the fact that using Android usually does not present such problems, you should know the possible algorithm of actions in such a case.

Main causes of malfunctions and solutions:

1. Virus infection of files. As a preventive measure, we can recommend pre-installing a good security program. If the problem has already appeared, you need to scan the system and remove the possible threat.
2. Minor system failures can occur spontaneously or due to other problems. Simple ones can be eliminated by restarting the device or resetting the settings to factory settings. In case of serious problems, you may need to reflash your smartphone, which is best left to the service center specialists.
3. Mechanical failures. Typically this type of problem occurs when unauthorized change specified network parameters. To correct such errors, it is enough to check the entered information.
4. Installation of special applications that limit the amount of information transferred. This is usually convenient for contract subscribers, or when using a child’s phone. At the same time, such software can block the transfer of any files, including.

Typically, the listed smartphone malfunctions do not affect the data transfer function, but in some cases this may be the problem. If the phone is under warranty, the easiest way is to contact a service center. For relatively old devices, diagnostics or repairs can be performed. It should be noted that such problems are not critical, but may indicate more serious problems that negatively affect the operation of the gadget.

Setting up MMS for all operators

Before sending the selected file, you should make sure that its size does not exceed 500 KB (for subscribers of one network) and 350 KB (for sending to another operator). Usually modern gadgets automatically compress the file to the required parameters, but it is better to check this in advance. In addition to the above problems, there may be exceptional situations, for example, when such an opportunity is not provided specifically for your region of residence. Messages in this case may be delayed or arrive in unreadable form.

Also, before sending, you must make sure that the entered number is saved in international format (for the Russian Federation this is +7xxx xxx xxxx). You should know that if the recipient's smartphone is turned off, your message is stored for no more than 72 hours, after which the subscriber will not be able to receive it again.

An Android smartphone usually sends MMS after setting automatic data. If the instructions say that you will need to perform some manipulations, but this option is still not available, useful tips Our article will help you understand the causes of possible failures, as well as determine the cause of the problem for subscribers of different operators.

This article examines the problem when an Android phone does not send MMS or does not want to receive (download) them.

Nowadays, information exchange is an important need of modern people, which they satisfy with the help of high-tech smartphones. A large number of files are continuously sent: music, messages, photos using a constant Internet connection. But this was not always the case; when the first phones appeared, you could only send SMS and MMS, which are no longer very popular.

There are situations when there is no network connection, but you urgently need to transfer data. In such cases, users remember mobile methods communication. Problems often arise with sending MMS; sometimes such messages are not accepted. Let's look at what could be causing this problem and how to fix it quickly.

Before looking for a problem, you need to think about the obvious reasons for its occurrence, which are quite easy to miss. This includes the following situations:

• Lack of appropriate amount of funds in the account cell phone, which is required for MMS transmission.
• Invalid input telephone number, or it does not exist at all.
• The MMS message volume limit has been exceeded.

Are you sure that the number was entered correctly, there are enough funds in the account and the MMS volume is not exceeded? Then the cause of the problem, why MMS is not sent on an Android device, should be sought in connecting this service.

To solve the problem you need to work a little with the settings. Mainly MMS settings and mobile internet are installed simultaneously.

MMS settings on Android

First you should try to order from your mobile operator automatic settings. You need to call the toll-free support number, where the operator will indicate the model Android smartphone and wait for a response message. When you open an incoming message, all the necessary settings will be automatically connected.

Selecting an access point on Android:

Increase

Not all users are able to solve this problem. Many people simply do not receive network settings, and in some cases they are simply not available for certain device models. In this situation, you should use the following instructions to configure the gadget yourself:

How to send MMS from Android

Previously, when the main ones were push-button phones, to send MMS it was necessary to select the appropriate option in the message menu. When using modern Android gadgets, everything has become significantly simpler: you just need to attach a file, for example, a photo, to a test message so that it is automatically converted into multimedia. This also works in the opposite direction - you should delete all multimedia files from the created MMS, which will turn it into a regular SMS message.

Increase

To send videos and music in messages, you need to know how to set up MMS on Android. Automatic settings designed for popular smartphone models are sufficient in most cases. If you can't go online and send files, you may need to enter the information manually.

Some subscribers ask the question of how to set up MMS on Android to the nearest office of their operator. Another option is to call the operator's service number. The downside of this method is the long wait.

When the autoinformer finishes voicing the menu, a link to the line with a consultant will open. After accepting the application, a notification with parameters is sent to the subscriber. You should save them, then you may need to reboot the device. Sometimes activation is requested: you will have to call the consultant again. You can save time by entering the settings yourself.

How does automatic tuning work?

The advantage of automatically setting up MMS on Android is that the subscriber’s participation is not required. When registering on the network, after installing the SIM card (and in some cases entering the PIN code), a message with ready-made parameters is sent to the phone. You need to save it, then you can use the Internet and send multimedia messages.

The disadvantage of automatic debugging is that it is only available once - during registration. If the device is successfully connected to the network, there is no need to configure it again.

Operator assistance in connecting MMS

If the automatic setup was not successful, you should contact your network operator for help on how to set up MMS on Android. You can do this for free by calling the service number. The number of requests here is not limited.

Megafon clients can contact a consultant for help by calling 0500. When the operator answers, he needs to clearly explain the situation and say what the difficulties are.

In Megafon communication stores you can configure settings for free mobile device. To find the nearest office, use the *123# “Call” command.

Tele2 subscriber can order automatic setup. To do this, you need to call service number 679.

Help for Beeline and MTS subscribers

Before setting up MMS on Android manually, you can call the Beeline operator at 0611. The call is not charged. You can also call the federal number 8 800 700 0611.

The MTS operator has a short support number 0890. From phones of third-party operators or from landline devices you need to call the federal number 8 800 250 0890.

Instructions for Motiv and Yota subscribers

For network users the motive is how to set up MMS on Android, the operator will help you by calling the short number 111. From a mobile or landline phone you can call the federal number 8 800 240 0000. But this is not the only service.

You can order automatic setup via #919 “Call”. The disadvantage of this service is that when large quantities requests, sending parameters will have to wait about two hours.

Another option is to send a request via message. Send a text to 0111 indicating the device model, the service that needs to be connected (in our case MMS) and your email address. The parameters will come to it.

There is also a support service for Yota network users. The subscriber can ask his question via SMS by sending a request to number 0999. You can get advice on the operator’s website or in a special mobile application.

Entering parameters manually on Megafon

You can set up MMS on Android through menu items. Its headings vary different models smartphones. Basically you need to go through the following points:

1. Settings.
2. Wireless network.
3. Mobile network.

Standard parameters have been prepared for Megafon subscribers:

MMS cost may vary depending on conditions tariff plan. Special offers from the Megafon operator will help reduce the cost of sending multimedia messages. There is no charge for incoming MMS.

Settings for Tele2 users

To send music and pictures from a Tele2 number in messages, the operator provides the following parameters:

In order to send MMS from your Tele2 number in the future, you will need to register in the system. To do this, after entering all the data, you need to send a multimedia message to yourself or another user.

If registration is not completed, your phone will receive not incoming MMS, but links to go to the Gallery. The same links will also be sent when sending a multimedia message to a device that does not support this function. When you start working with the MMS Gallery, instructions with a sequence of actions will be displayed on the screen.

How to enable MMS sending for a Beeline SIM card

First, you should look for the name “Beeline MMS” in the list of profiles. If it is not displayed, proceed to creating a profile with that name. For a Beeline SIM card, the parameters are listed below:

To complete the operation, you need to go to the messages menu and select " Setting up MMS", then click on connection profiles. You need to make sure that the newly created Beeline MMS is selected.

After completing all operations, it is worth checking the result. Create a message, add a melody, photo or video to it and send it to the subscriber. If the MMS is delivered, it means that all actions were performed correctly. If you are notified of an error, the entered data should be checked again.

Connection algorithm for MTS

To send multimedia messages from an MTS SIM card, you will need to create an access point using the following parameters:

• name – MTS MMS Center;
• access point – mms.mts.ru;
• username – mts;
• password – mts;
• home page – http://mmsc;
• IP address – 192.168.192.192;
• MMS port – 8080;
• MCC – 250;
• MNC – 01.

To complete debugging, you need to send to service number 8890 message with MMS text.

List of settings for network users Motive

To exchange multimedia messages on the Motive network, you will need the following parameters: