The apple lights up but the iPhone doesn't turn on. iPad won't boot, apple is on fire. Order professional help

If you are a regular jailbreak user, then you should be familiar with the situation when a lone apple is burning on the screen of your iPhone or iPad (on a black or white background, depending on the color of the iOS gadget) or you are watching an endless “daisy”. Of course, users who have never used jailbreak may encounter such problems, but the solution to this problem will be the same for everyone.

It is worth listing the most common causes of the “frozen apple” or spinning “daisy” problem:

changing the iOS file system;
incompatibility of jailbreak tweaks from Cydia;
problems with custom firmware;
faulty hardware of iPhone, iPad.

In fact, there is only one solution to this problem and it is universal - a complete flashing (restoration) of the iPhone, iPad. This procedure will not take you much time, so I recommend it, but if difficulties arose due to the installation of unstable jailbreak tweaks, then you can try to remove the latest tweaks via third party utility to access file system or through the “Safe Mode” mode (more on this below).

White apple on a black background and black apple on a white background - depends on the color of your iPhone and iPad case

Flashing/Restoring iPhone, iPad

In our case, the device is not operational, so you will need to enter it into mode. The procedure is simple:

connect iPhone/iPad to computer;
press and hold the Home and Power buttons for 10 seconds;
after exactly 10 seconds you must release Power button, but leave the Home button pressed;
The device screen will not turn on, but iTunes on your computer will recognize the device.

You can begin recovery, and after iOS installations, iTunes will prompt you to restore your system from backup copy or set up your iPhone or iPad like new.

For those who are not looking for easy ways

The second method of dealing with the “eternal daisy” or “endless white/black apple” will require much more labor from you, but in this case you will not have to copy content from iTunes to iPhone or iPad, as in the first. There is also no guarantee of success, but you can try. First, you need to understand whether the problem is with Cydia tweaks. There is such a way to download iPhone, iPad - download without tweaks:

turn off the device;
hold down the volume up button “+”;
turn on the device and wait full load iOS without releasing “+”.

If the device boots up, then the problem lies in the recently downloaded tweak. If so, go to Cydia and have the problematic jailbreak tweak removed.

If the device does not boot:

Turn off the device and turn it on again;
After a while, try to call your iPhone or send iMessage, if we are talking about iPad;
If the message/phone call went through, you can access the file system; if not, reflash/restore your iPhone or iPad according to the instructions above.

And so, the device receives messages and this means only one thing - the error occurs at the final moment of loading iOS. Therefore, using iTools or iFunBox, you can access the device’s file system and try to restore it yourself problematic files. Of course, you can only restore files if you have backup copies, but if your iPhone or iPad shows an “eternal apple”, then most likely you have destroyed the device by digging through the file system and you should have backup copies of the files you change .

Nothing helped?

You are not a jailbreak user and you cannot restore your device, or maybe you cannot put your iPhone or iPad into DFU mode at all, although you are doing everything correctly - this means the hardware of the device is faulty and you should take it to the service center.

If you have not found an answer to your question or something has not worked out for you, and there is no suitable solution in the comments below, ask a question through our

Professional repairs may not be necessary if charging iPhone flashing Apple, and the device itself does not start. The cause of the malfunction will be minor disruptions in the operation of the accounting system due to another power failure due to a faulty USB cable. Try turning on the device using the original charger. If iphone the same as before, flash below, perform self-diagnosis and check the device for mechanical damage.

Scratches and chips lead to malfunction of the modem, plume, mb and other internal elements of the device. Do not replace broken parts of the device yourself. Seek qualified professional help if your device is flashing below or not even working properly.

Why doesn't the device start?

Errors software may cause the device to not charge

Included

and the logo flashes. apple icon. This can lead to the following problems:

wear and tear of spare parts
low battery
penetration of moisture into iPhone case
systemic problems

Additionally, when the iPhone is turned on, the apple icon may appear and blink for a long time if the settings were not set correctly. To ensure your device works properly, reset the indicators.

If your phone is dead and won't charge due to a fall, the problem may be more serious. Impact may damage the connectors or disable the loop. Unless you have professional equipment and experience disassembling equipment, you should not attempt to repair the device yourself. Qualified technician who understands specifications Apple devices, will be able to correctly and accurately correct the error.

How to restore your device

iPhone not

Included

When charged, it drops onto the apple.

Effective solutions to the problem:

hard reset iPhone
update software and reset network settings
clearing RAM

To clear RAM and restart all apps, simply restart your phone. This option works with any Apple technology. If the phone turns on after clearing the phone memory, the reason why the smartphone was not working properly and the apple is blinking is hidden in the applications freezing.

How to perform a hard reset

If you are charging an iPhone flashing apple on the screen and the device itself does not turn on, try performing a hard reset. This method will fix some system problems.

Hard Reboot Steps:

disconnect the device from the charger
Hold down the Power and Home buttons for a few seconds.
Wait until an apple appears on the display

If the reason is that the apple flashing V

charger

It consists of changing settings and setting incorrect parameters, the method does not help correct the situation. In such cases it is required full reset data and installation of new software.

When you need professional repairs

If after rebooting and restoring the software, the phone is still dead and the apple icon is blinking while connecting, the cause of the failure may be resolved to hardware problems. To eliminate failures, it is most often necessary to replace the following elements:

motherboard
Power button
power regulator
flash memory

Only qualified specialists can carry out repairs efficiently and quickly. The website youdo.com offers the services of a master who quickly and accurately restores gadgets of any model. Yudu artists will tell you why the apple icon blinks when you put your smartphone on charge, and then they will offer to fix the problem as soon as possible.

Yudu professionals will repair your iPhone, taking into account all the manufacturer's requirements. Teachers quickly learn why charger iPhone

flashing apple

And properly repair the device using original spare parts.

Today the iPhone is super popular and in demand. Its excellent screen, which gives an incredibly high-quality picture, has captivated millions of users. Practical design, popular interface, convenient applications will not leave you indifferent to this crown of creation. Apple. But what to do if even such a perfect device has problems. For example, it simply does not turn on. In this case, it is very important to correctly diagnose the cause. Only then act.

First of all, you need to diagnose problems

We will describe the most common causes of problems and tell you what to do.

When the iPhone looks at you with a blank, black screen, do not rush to panic. This doesn't mean it's over. Most likely, the reason is that the battery is completely discharged. The second reason could be frozen iOS. It is easy to rehabilitate the device. The main thing is to do exactly what we tell you.

If the reason that the battery is low is because the iPhone was left in the cold for a long time, then first you should warm your device in your palms. Then connect the device to the charger for fifteen minutes. If the reason for your iPhone not working is a low battery, it will turn on soon. If this does not happen, perhaps frozen iOS is to blame. Then you need to press the HOME and POVER buttons simultaneously and hold them for ten to twenty seconds. Soon you will see an apple burning on the screen. Release the buttons and after about a minute iOS will start.

If in this case the long-awaited apple does not burn, we will tell you what to do. You need to turn on/off silent mode on your iPhone two or three times in a row. Then connect the charger for fifteen minutes. This operation, as a rule, always gives a positive result.

If these steps are unsuccessful, try changing the charger and cable. Perhaps they are the culprits that the iPhone does not turn on. If, moreover, you are not using the original, but a cheap Chinese counterfeit, this may be the reason.

2. If the buttons do not work

There is also the following option: the iPhone does not respond to button presses, and the screen of the latest application is frozen. The first thing to do in this situation is to reboot the device in forced mode. To do this, hold down the Sleep/Wake and Home buttons at the same time, and after ten to fifteen seconds you will see the apple light up on the screen again.

It happens that the device still does not turn on. Then you should connect to the charger and leave the iPhone to charge for fifty to sixty minutes. You will soon see the charging screen light up. If this does not happen, carefully check the connector socket, charger and cable. Perhaps they are the reason. Try the same procedure using a different battery source.

3. If the iPhone does not turn on, but the apple is constantly on fire

Another one unpleasant situation, which is often found among users of the iPhone 4S, iPhone 5S - the apple is on and off on the screen. In this case, do not test the strength of your nervous system. Most likely, there was a problem restoring your iPhone from a backup. What should you do in this situation? Recovery mode and the computer on which you should first launch iTunes will help you. Then connect the USB cable, but for now only to the computer. Your next action is to turn off the iPhone completely, getting rid of the apple, which is still on and off. To do this, you need to hold down the “HOME” and “POVER” buttons. Next, press “HOME” and connect USB. This should be done until the iTunes logo appears on the screen and next to it there is an image of a plug. You will see a message on the screen that recovery mode is running. All you need to do in the future is click the “Restore” button.

4. If all methods fail

What to do if you've tried everything, but the apple still doesn't appear on the screen of your iPhone? There is a special recovery mode - DFU. It is designed to restore iOS firmware when all your other attempts have failed. Let’s say right away that this mode should be used only as a last resort, because if it is activated, all data from the iPhone will be lost.

So, first you need to connect to the charger for five to ten minutes. Once you're connected to your computer, check to see if your device shows up in iTunes. If this does not happen, go to DFU mode: simultaneously hold down the “HOME” and “POVER” buttons for ten seconds, then release “POVER”. Next, hold the “HOME” button for fifteen to thirty seconds until iTunes writes “Recovery Mode”. Don't expect further that the screen will thank you and show you an apple, as usual. Evidence of successful entry into DFU is the absence of any image on the screen. If you want to restore the firmware in your iPhone, find the “Restore iPhone” button in iTunes. To exit this mode, simply unplug the cable from the device and press “HOME” and “POVER” for ten seconds. After these manipulations, the iPhone should reboot.

5. The service center will come to the rescue

If, despite all your efforts, you were unable to revive your iPhone on your own, you will have to turn to specialists for help. But remember that only with proper handling will your favorite gadget serve you faithfully for many years.

As you probably know, the iPhone and iPad did not come down to us from heaven... but from “ Jobs garage" Therefore, like everything material in this world, these gadgets are not ideal in their essence and can glitch and freeze. If your iPhone suddenly stops turning on, you've come to the right place.

In this article, we will look at the most common problems in which the iPhone does not turn on and try to find a solution for each of them. Now stop panicking and relax... Now we will fix everything...

If you dropped your iPad from the 14th floor, or washed your iPhone along with your jeans, this article is unlikely to help you. Here it should be clear that the device has suffered quite serious damage. In such a situation, it is better not to guess why the iPhone does not turn on, but to immediately contact a service center.

If you do drown your iPhone in the toilet -
You need to unlock your iPhone or bypass Activation Lock -
iPhone stuck on "Slide to Update" screen -
Don't know how to reboot your iPhone? —

Let's assume you don't know the reason why your iPhone stopped turning on. Then let's focus on the symptoms provided by your device, and then decide what can be done in each similar case.

Actually, here are the most common symptoms of a problematic iPhone:

Constantly black screen
Application frozen
iPhone gets very hot

Let's look at each of the reasons in more detail, and also list possible steps and solutions to turn on the iPhone.

Constantly black screen

The most common case is when iPhone screen stays black no matter what buttons you press. Usually the reason for this is entirely or frozen iOS. In the rarest cases, it is possible that the firmware has crashed, but more on that below. The next couple of steps should get your device back into working order.

STEP 1 - If your iPhone has been in the cold for a long time, I give you a 100% guarantee that this is the reason that it does not turn on. Didn't you know that lithium ion batteries do not tolerate low temperatures and almost immediately lose their charge"? Warm up the phone in your palms and proceed to step 2.

STEP 2 - Connect iPhone to charger and leave for at least 10 minutes. If the reason was a low battery, the iPhone should turn on by itself. Otherwise, go to STEP 3.

STEP 3 - In this step, you need to hard restart your iPhone (it is better not to disconnect the charging cable). This procedure is slightly different for different iPhone models. More precisely, the way it is performed is different... To make it clearer to you, I have given brief instructions below:

iPhone 4S/6S: hold down the HOME and POWER buttons for 15 seconds.
iPhone 7: Hold down the POWER and - volume buttons for 15 seconds.
iPhone 8/X/XR/XS/11: quickly press and release the volume button + , then do the same with - , then hold down the Side button (formerly called POWER) for 15 seconds.

If the combination above is successfully executed, the iPhone screen should first go dark and then display the glowing apple logo. Release the buttons and wait about one minute for iOS to fully launch.

STEP 4 - Sometimes it is necessary to turn the silent switch on/off a couple of times before performing STEP 2. Nobody knows why, but it REALLY helps if holding down the HOME and POWER buttons does nothing.

If these steps do not work, it may mean one of the following:

Charging cable is faulty
The power adapter has failed
iPhone internal components are faulty

Find a 100% working charger and cable and try steps 2 - 4 again.

If your iPhone won't charge - .

Don't be skeptical about the charging module and cable. Quite recently I replaced the original “lace”, because... with him using iPhone Charged only up to 60%. Charging cables Apple technology very “delicate” and can fail even without external damage.

Regarding power adapters (in common parlance - charger) I can say one thing - TRY TO USE ORIGINAL POWER ADAPTERS. Frankly, Chinese cheap fakes heat up and melt right during operation. This applies to both home 220V and car 12V chargers.

Now about the Lightning cables - the original cable is initially flimsy, but costs an expensive $19. I advise everyone to buy lightning cable from Ugreen, which is marked MFI(Made For iPhone) and accordingly uses the original lightning chip. For little money you get an eternal cable!

Well, what if you charged your iPhone with anything? (for example, cheap Chinese car adapters), it is possible that failure of the power controller or iPhone charging controller.

If this is your case, then the battery will simply be physically unable to accept a charge, because... The charging microcontroller does not issue the necessary command for this. I wrote about this in accessible language in a separate article -.

It’s difficult to do something here yourself and it’s best to contact a normal service center.

Application frozen

It also happens that an application on the iPhone may freeze or stop working normally. In this case, you need to force close it and thus unload it from the phone’s memory.

To force close the application, do this:

iPhone 4S - 8: double click on HOME button, and then swipe up to dismiss the hated application.

iPhone X: Swipe from the very bottom of the screen and hold your finger on the screen until the application tiles appear. Swipe up to unload a frozen application from memory.

iPhone doesn't respond to button presses

A couple of times my iPhone completely stopped responding to pressing physical buttons. At the same time, the screen of the last application usually remained on the screen, and I could not exit it. If you find yourself in a similar situation, simply “tough”.

To do this, hold down the HOME and POWER buttons for 10 seconds (for iPhone 7, 8 and X, see button combinations above).

The Apple apple is constantly lit on the screen

It happens that the iPhone does not turn on, but at the same time the Apple lights up on the screen, then disappears... and so on ad infinitum. This usually results from failure iOS update, a clumsy jailbreak or a crash when restoring an iPhone from a backup.

In such a situation, it may seem that the end of the phone has come. But don’t rush to conclusions, but rather try doing the following with the device.

In most cases, decide this problem possible by iPhone recovery to factory settings. There are several ways to do this, depending on your situation. Below I have provided both iPhone recovery modes.

STEP 1 - Launch on computer iTunes and connect USB cable(To USB phone There is no need to connect the cable yet).

STEP 2 - Turn off iPhone by holding HOME + POWER buttons (for iPhone 7, 8 and X the combinations are listed above).

STEP 3 - Long press the HOME button and connect to USB device cable.

STEP 4 - Hold the button HOME until the iTunes logo and a picture of a plug are displayed on the device screen.

STEP 5 - A notification will appear on the computer screen indicating that the device is in recovery mode.

STEP 6 - Now just click on the Restore button... Be patient as... Before restoring your iPhone to factory settings, your computer will need to download latest version iOS from Apple servers. Wherein the phone will lie with the screen turned off and show no signs of life.

Even with good fast internet, the download process may take 40 minutes or more. If your Internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.

DFU mode

If your iPhone does not turn on, even after trying above, there is still one more method - (Device Firmware Update). To start your iPhone in DFU mode, you must strictly follow the instructions given in the link above.

If you need to put your iPhone X or 8 into DFU mode -

iPhone gets very hot

Very often, after an iPhone falls to the ground (even from a small height), its screen goes blank and the device itself no longer turns on. When trying to charge, the iPhone case immediately starts to get very hot, which is NOT normal.

In such cases, I would not experiment at home. May God save you from fire...

It is natural to think that after physical impact (falling to the ground), the internal components of the iPhone could fail. What exactly, I cannot say. It needs to be disassembled and diagnosed. In this case, find a normal service center and entrust this issue to professionals.

None of the methods helped

What? Still struggling with your iPhone or iPad and just can't get it to work? My advice to you is to save your nerves and go to a normal service center. There is no charge for the preliminary inspection.

Apple technology is considered one of the most reliable, however, even this does not eliminate problems with the gadget. Sometimes such breakdowns, for example, the iPhone does not turn on, the apple lights up and goes out, can be associated with the installation of dubious applications or with a number of other factors.

However, first things first.

When the iPhone does not turn on, the apple lights up, but nothing else happens, it is not necessary to immediately contact a service center. There can be many factors, as well as solutions, to this problem. Let's look at the most common of them.

Questionable applications

You should remember and check which applications were installed in Lately on iPhone. Unfortunately, with using iTunes this error You won’t be able to solve this; to do this you will have to install a non-official utility called iTools. It is advised to delete the most recently downloaded applications one by one, and then try to restart the iPhone until this works.

Jailbreak

As you know, this program opens unlimited free access to many paid or even expensive applications. However, if Jailbreak is not installed correctly, it can also become a factor in the fact that the apple blinks, blinks, but the phone does not turn on. In this case, the only option is to reflash the device, which means complete loss of data on it.

Mechanical problems

Hardware problems include the following:

Error in power supply. This is most often caused by a sudden power surge, so iPhone owners are not advised to leave the device on charge during a thunderstorm or during power outages caused by any other factors.
Low indoor temperature. On the official Apple website there is even a scale of air temperature that is most favorable for the device. Manufacturers claim that if the device has been in an environment for a long time where the air temperature is below a given norm, this can lead to malfunctions of the device.
Battery failure. A factor in this breakdown may be the use of a non-original charger or charger. Bad quality. Owners of old devices are not recommended to allow full discharge to extend battery life.
If the owner of the device decides to replace the battery, he is certainly advised to contact a service center, because otherwise the chances of buying an original battery are virtually zero.
Errors at work motherboard. This failure is easy to recognize in advance if, with each time you turn on the device, the apple begins to burn longer and longer. It is better to get this problem repaired as soon as possible, because failure is inevitable.

iOS system error

If the malfunction is caused software error iOS, there are not so many solutions.

In some cases, a simple “deep reboot” may help. This means that you should hold down the Home key and the Lock key at the same time and wait until the mobile restarts. It is worth disconnecting your smartphone from your computer or other device, as they may interfere with the reboot process. If it worked, remove the last few programs that could lead to the iPhone not turning on, the apple burning.

The mobile phone must be connected to the computer using the original cable, then launch iTunes on the device, and then click on the “Restore device” button next to the name of your device.

After that it is better to install new version device firmware.

Checking the cables

A rare, but no less important, reason may be that the cable has come out of the connector. Then you need to do the following: you need to open the case, check whether all the parts are in place (to do this, just find an image of the correct diagram and check it).

Video

Main chip malfunction

Problems with motherboard can be caused by many factors, most often associated with careless use of a smartphone.

These include:

Falling into the water. Most likely, due to moisture, the power circuit was shorted, it burned out, and the iPhone 6 stopped turning on.
The power controller is faulty. As mentioned above, this could be caused by non-original charging or a voltage drop in the system.
Falling onto a hard surface.
Failure due to wear.
Memory chip error.

Deep battery discharge

The battery can be put into extreme use mode due to a special controller that will not allow the charging process to start. In this case, first of all, it would not hurt to make sure the battery is working.

The way to solve this problem is to remove the battery and then connect it to the tester. If the voltage is below 3.2V. - you need to connect a universal charger to the battery, popularly called “Frog”. It will take 1-2 hours to charge, after which you should return the battery to its place and try to start the device again.

If even when the phone is charged, nothing helps, contact the service center.

Apple Service Center

If all of the above methods did not help, there is no need to despair. The device needs to be taken for repair, where specialists know exactly what to do if the iPhone does not turn on. It is possible that another part of the smartphone has stopped working and will have to be replaced.

Conclusion

All of the above instructions should help fix the problem. We must also remember that the cause of breakdown is often careless use of the mobile phone. For example, frequent falling of a smartphone or dropping it into water. In some cases, the causes of malfunctions lie deeper than one might assume. regular user, and therefore it is recommended not to disassemble the smartphone yourself, but to use the services of a service center.

Do not forget that it is best to replace parts only in an official center, otherwise, it is quite possible that the problem will not be solved by repairing one damaged board.