How to change network to home windows 10

AT 10 Windows versions the home network began to be called private, and the public network became public. At the same time, they differ in the same way as before, i.e. access parameters shared files and folders, the ability to use a shared printer.

Sometimes it becomes necessary to change one type of network to another in order to perform some action. We will tell you how to do this in this article. To find out what type of connection is currently being used, go to network control center and shared access and find out the parameters of the required connection.

Changing your network connection

In some OS versions, the available version is quite simple and quick way change connection type. All you have to do to do this is go to " Options", then go to the section " Network and Internet", and here you can change the properties of the active connection.

After selection, the required property will be installed and nothing else needs to be done. If the OS version does not support this method, then you will have to use one of the other recommendations.

Changing network settings

There is another option available for those whose device is connected using twisted pair cable. To use this method, you should right-click on the current connection, and then go to network parameters.

In the next menu you need to go to tabEthernet, then click on the name of the active connection. A window will then open with the option to make the device discoverable. To do this, you need to enable this option by moving the corresponding slider.

Change when connected wirelessly

The algorithm of actions in this case does not differ much from the previous paragraph. First of all, you need to get into connection parameters. This can be done by right-clicking on the Wi-Fi icon and selecting the desired item.

In the menu that opens, you should also select Wi-Fi, and then click on the active connection.

In the window that appears, you can make the connection private, or, conversely, make it available to all users.

Using Home Groups

This method will only help those users who need to change the type of their network from public to private; the reverse conversion will not be possible in this way.

To configure, you need to open the item Home group, which can be found in the Control Panel. This will open the HomeGroups panel, which will tell you that it can only include computers with a private connection. To convert, click "".

After which, the system will request confirmation of this action, and then carry out the conversion process itself.

Resetting network settings

As a rule, the connection type is selected the first time the computer connects to the local network, after which it can only be changed using the above methods. But you can also pretend that the computer is connecting for the first time. For this you will have to reset settings.

To do this, you will need to go back to Settings - Network and Internet. Then you need to go to the status tab, which is located on the left. Will be available here reset parameters.

After selecting the appropriate item operating system will require confirmation of the action. Usually, immediately after the process is completed, a reboot occurs, but if it did not happen, then you should do it yourself.

After restarting, the device will make a new connection and you can select the desired settings.

It is worth saying that it makes sense to use a private network only if you have a router through which the main data exchange with the Internet occurs. In this case, all computers in the room can be combined. If the PC is connected directly, via the provider’s cable, then you need to choose a publicly accessible one, since it uses more secure exchange protocols.

This story began with my purchase of a small, only 8 ports, but fast, 1 Gb/s on each port + internal operating speed up to 13.6 Gb/s switch.
I brought it home, unpacked it and connected it to the network so that my old router (aka 100 Mb/s switch, aka access point) would no longer look directly at my main PC, but at the new switch.
Why did I do this?
Yes, because I got it a little earlier home NAS and now 100 Mb/s was not enough for me and I decided that it was time to increase the speed of my home network.

The first evening everything was great.
Data began to simply fly across the network.
The speed of working with the NAS has become remarkable.
And I was quietly happy.

The very next day, my Windows 7 PC could not find the Internet.
From the word in general.

And I went online (from the laptop, fortunately it worked perfectly over WiFi and for it everything was the same as before).
On the Internet I only found articles like this.
There is a solution here, but it is suitable for Windows 7 Professional, and I have “Home advanced” at home.
The difference between these versions is that the valiant marketers from MS decided not to include all the software with the home version.
For example, the utility for editing local policies mentioned in the solution is simply not available in home versions.
So these solutions didn't work for me.

And I decided to figure it out on my own - is it possible to solve this problem with only what is available at home? Windows versions 7.
And you know, I won her :)

It turned out the following: for some reason Windows 7 decided that since it is now looking at a device that is unfamiliar to it, it means that this connection must be considered an unfamiliar public network.
However, the home network did not go away (after all, the router was still online and did not change the address).

Remark:
Unlike Windows XP, these "wonderful" network types directly affect the operation of the built-in FireWall.
That is, if the network is in “Public” mode, then there will be such restrictions that it will be practically impossible to work with it.

It was possible to remove the new network by turning off and on the network adapter.
But doing this EVERY time you turn on the PC is tiring.
So it was necessary to look for another way out.
It took me about an hour to search.
And now I can help you with this problem.

Action plan

1) Open "Network and Sharing Center"

2) Click with the left mouse button (LMB) on the “house” of our old network.

4) We see our good old network. We will need to remove it. But now, unfortunately, this will not be possible. By the way, there may be more networks here if you have, for example, a VPN. It may not be:)

5) Close the window with the list of networks, and leave the “Setting network properties” window (the one that opened after clicking LMB on the “house”) OPEN. We will still need it, but we won’t be able to open it.

6) In a separate window, open the list of network adapters.

7) Disable our network adapter (if you have more than one, select the one through which you are connected to the problem network).

8) After this, you need to return to the “Configuring network properties” window (remember, we left it open) and open “Merging or deleting network locations” again.

9) See, now we can delete our old network. So let's do it. After that, use the “OK” button to close both windows.

10) Turn on the network adapter back. The PC will find the network, but will not be able to recognize it, which is exactly what we wanted.

11) Now click LMB on the “Public Network” inscription (now it will work as a link). And, lo and behold, we can choose the network type!

12) Select the “Home” type (or “Work” if you are at work).

13) In principle, that’s all. But for beauty, you can also give the connection a name. To do this, click LMB on “Home” and set a new network name.

14) Close the window with the "OK" button.

This completes the process.
And your network works normally again :)

If you have any questions, please comment :)

This is my backup journal.

I would welcome comments in either of the two magazines.
After all, since you comment, it means you like it.

Sometimes a user, even a completely inexperienced one, needs to change the type Windows network.

Why and how to do this correctly so that everything works correctly?

What is network type

Read also: How to set up a local network on Windows? The simplest ways

The network can be home (private) or public.

Other users can connect to a public network, but a home network is limited to you personally, your environment and is a reliable means of protecting your computer or laptop from intrusion.

Each of them has its own advantages and disadvantages.

For the first time when connecting new network Windows will ask the user for permission to automatically connect to the public network.

That is, a network that will not allow other users to find your PC or laptop when you are in a public place.

This is especially useful for a laptop. Essentially, no one will be able to connect to you, view your data, organize a group without your permission, and in general, this is a very reliable means of protecting your hardware.

But if you are a user personal computer, system unit from which, unlike the same laptop, you don’t want to drag it anywhere, then a home network will be more useful.

It gives access to all devices in your home and those to whom you allow it, but at the same time hides the computer itself from other users and allows you to easily share files and data within your home network.

Essentially, both are beneficial in their own way, each having benefits that are needed at one time or another. But at the same time, you can choose only one of them as “working”.

How to do this if this moment Is the one installed by default not the one you need?

How to change network type in Windows 7

Read also: Unidentified network without Internet access: How to fix?

The permission to automatically select a network has already been mentioned above. Windows literally forces the user to choose whether he wants the computer to be visible on the network or not.

If the user answers “Yes,” then the network becomes private, connecting devices. If “No”, then it is closed from other public devices.

Moreover, it happens that when you first connect, the system itself selects the network type, and this is fraught.

The user will most often end up having to change it. And this is where the question arises of how to do this.

On Windows 7, changing the network is much easier than on others, since, for example, even on the G8, these functions are hidden much deeper, and the ability to switch the network is almost tightly hidden.

And if you have Windows 7, no matter whether it’s home, professional or any other, you can change the network type to home and vice versa in a few clicks:

• At the bottom we find the network connection icon. It's located on the taskbar, on the right, and looks either like steps in profile or like a computer monitor with a cord.
• Click on it, opening the menu.
• And in this very menu, select the item: “Network and Sharing Center”. After this, a window with connection settings should appear.
• To avoid problems, it is better not to touch anything unnecessary, but very carefully click on the inscription “ home network" or "Public Network". One wrong click in this menu can completely disrupt your network connection.
• And finally, in the window that appears, change the network to the one that is needed at the moment.

As you can see, in Windows 7, working with the network is quite simple, but the eighth version becomes a little more complicated in this regard.

Read also: 5 Tips for Configuring the Windows Page File (7/8/10)

The difficulties begin with the fact that the “Home Network” is now not “Home” at all, but “Private”, and along with the changed name came some changes in the operation of these same networks.

For example, “Public Network” now not only restricts the computer from illegal intrusion or legal but unwanted connection, but also restricts the user from working with the network - transferring data becomes much more difficult.

Well, “Private Network” now has advanced functions for connecting to printers and other devices.

Windows 8 also has a network setup prompt, asking the user if they want to automatically connect to devices.

This determines the type of network and its functions. For example, to connect a TV, tablet or any other device that needs the Internet, the type of network does not play a special role, but when exchanging files, data, or creating a home group, “Private” must be selected.

Yes, in Windows 7 you could change the network in a few clicks, but here you will have to suffer longer:

• The first thing you need to do is open sidebar. No, not even that. The first thing you need to do is find it. If you succeeded, great, if not, then the Win + I key combination will help.
• Just below the icons and icons there is a menu with the name "Change computer settings", which is what you need to click on.
• Then you need to select “Network”, and then “Connections”.

All that remains is to select the icon with the name of the desired network and click on it. It would seem that the hardest part is already behind us, but no.

Consider that you are a knight who has reached the castle, but still must find the princess. And this very princess is located under the inscription “Search for devices and content”, in the form of a small switch.

If you select “On”, then the network will be private, and if “Off”, then it will be public. Difficult? Yes. But there is another way.

Changing the network through local policies

Read also: TOP 15 Best free antiviruses for Windows | Rating 2019

This is not to say that this method is much simpler, but to some it may seem like an easier option for changing the network.

And in the end it's a little faster:

• First of all, you need to open local security policies. You can do this by going to Start, and then "Administration", where you will need to select the appropriate item.

This can be done much faster if you hold down the Win+R keys, then enter secpol.msc in the line that opens and press Enter. Then the desired window will open instantly

.

• In the window that opens, in the list of folders on the left, we find.
• And then on the right we look for the name of the network that you want to make working - private or public.

• Right mouse button on the desired name, select “Properties”.
• Need to open a tab "Network Location".

And finally, Windows 8 and Windows 8.1 have a third, albeit very unusual for the average user, method.

In addition, it is not very secure, but it is a little easier than the previous two methods of changing the network.

You need to find the key in the registry HKLM\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\NetworkList\Profiles.

Each such key corresponds to one network, which is displayed in "Network Control Center".

You can find out which key is associated with the desired network using the “ProfileName” parameter.

If in "Network Control Center" your network is called “Network 1” then you need to look for a key that contains the “ProfileName” parameter equal to the value “Network 1”.

In the required key, you need to change the value of the “Category” parameter. This parameter defines the profile network settings, which will be used for the network.

The values ​​of the “Category” parameter can be the following:

• 0 - “Public network”.
• 1 - “Private network”.

Change the “Category” parameter to one of these values ​​and close the editor. If immediately after this the network type does not change in "Network Control Center" then restart Windows.

If everything was done correctly, the network you need will immediately appear in the menu.

It seems very difficult, right? But it's not that hard if you try, although of course compared to Windows 7 it looks like a real puzzle.

And if everything is so complicated with the “eight”, then what can we expect from the “ten”?

Data security is a priority for any computer network. Windows developers understand this very well, so they have created special profiles for network connections. The profile selection appears the first time you connect to the network. But what to do if you accidentally selected the wrong item or did not know what needed to be indicated. The solution is quite simple - you need to manually change the network profile. About this and others useful things will be discussed further.

The importance and necessity of changing privacy settings

In Windows, you can distinguish between private and public networks. The fundamental differences lie in the restrictions imposed. In private networks they are minimal, because it is assumed that access from the outside is limited, and accordingly, the security of your data is not threatened. Public networks have more restrictions to improve security.

A private network should be installed if you have complete control over it. This will allow you to take full advantage of all the advantages of the network:

• sharing files between nodes;
• using a shared printer;
• creation of a multimedia DNLA server.

If data security is a priority, or you, for example, connect to Wi-Fi in an office, institute or any other public place, then use only the public network profile. This will allow the built-in firewall to protect your personal data from possible attacks by other users on the network.

Please note that when connecting to an Internet provider directly without using a router, it is recommended to set the “Public Network” profile. Other network participants could theoretically gain access to your computer, although the provider must provide a high level of security. This profile makes the computer "invisible", making it more difficult for malicious software to penetrate the system.

For these reasons, it is extremely important to set the correct network profile. Incorrect settings can either limit functionality or expose your computer to the risk of hacking and loss of personal data.

How can you change the network profile in Windows 10

"Ten" boasts sufficient flexibility in settings, so it allows you to change the network connection profile in several ways. For ordinary users, we recommend using standard Windows settings using the OS interface. In rare cases, problems arise, so there are a number of alternative techniques, for example, some use the registry or Windows Shell. We will talk about these and other methods further.

Using standard settings

The network connections interface allows you to change the network profile in virtually one minute. We will look at modification options for local Ethernet and Wi-Fi connections. The procedure is general. Here the differences are only in the windows that open.

When connecting to Ethernet

If your PC or laptop is connected via a wired (Ethernet) connection, then to change the network profile you need to do the following:

As you can see, the process is simplified as much as possible, but does not present any difficulties. Changing the profile occurs instantly, so there is no need to restart the computer.

For Wi-Fi connection

The user must follow the following instructions when connecting to the Internet via a Wi-Fi wireless access point:

When using Wi-Fi at train stations, cafes or offices, be sure to set your profile to public. This action will not take more than a minute, and you will ensure increased security your system.

Through setting up home groups

If the above methods for some reason do not produce results, we recommend that you try changing your profile through the homegroup settings. This section allows you to significantly simplify the process of providing users with shared access to resources. The function can configure network connection, open folders for public viewing and much more. This section in the OS can also be used to change the network type from “private” to “public”, and, if necessary, back again.

To do this, users need to follow the following instructions:

Be sure to apply the settings for the changes to take effect. This is an alternative method on how to change your profile.

Resetting network settings

As many have already understood, the request to select a profile type appears only once, i.e. when you first connect. Afterwards the profile is set according to the selected answer. It can only be changed through the settings, as described earlier. However, you can call the pop-up menu with profile selection again. To do this, you need to reset the settings. This procedure is completely safe and will not affect any user data. To do this, follow these steps:

For the procedure to succeed, you need to restart your computer. Afterwards, the system will detect a new connection and prompt you to select a profile again.

Through local security policy

Another alternative way, which provides for the use of a section local politics security. To configure, you should:

Setting user permission is necessary to ensure that the settings are active and not reset.

Via Windows PowerShell

Windows has a special tool for automating processes, which is command line with an interface. The tool will help you change your privacy settings, but this method Suitable only for advanced users, as it assumes working with PowerShell. In the console you just need to enter the command

to install "Private Network". To change your profile to public, replace the word "Private" with "Public".

Windows 10 assigns private status to each Wi-Fi or Ethernet network (she's homemade), or public (public) network. Depending on the assigned network profile, the default settings for a specific connection (network) change. There are settings for sharing files and printers. Which determine whether other devices will see your computer in local network.

When we connect to a Wi-Fi network for the first time, or connect to the Internet via network cable, then Windows 10 asks us: “Do you want to allow other computers and devices on this network to discover your PC?”

If you select "Yes", the system will assign this network the status of home. And if you select "No" (or choose nothing)– then the network profile “Public” will be assigned.

You can view the current network status in the Network and Sharing Center.

In the settings, you can always change the public network to your home network, and vice versa. But let's first find out what the difference is, what the network status affects, and what problems can arise if you set the network location incorrectly.

What is the difference between a home and public network?

As I wrote above, the difference is in the sharing settings that are applied to the network by default after assigning a network profile to it. It's simple:

• Private network, or home network - the computer will be discovered by other devices on the network and files and printers will be shared. Of course, it is recommended to assign this network profile to a Wi-Fi network or Ethernet connection only when you trust the network itself. For example, connected to their home network, at work, etc. And if there is a need for the computer to participate in the local network.
• A public network, or a public one, is the other way around. The default settings for this profile are such that your computer will not participate in the local network. It will not be detected by other devices on the network and will be as secure as possible. When we connect to open, unknown Wi-Fi networks, or even directly via a network cable from the provider, it is recommended to install this particular network profile.

Sharing settings can be changed separately for each profile. Or for all networks at once. You can do this in the control panel. At: Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings

These settings may be useful for example when . But it is better not to change the parameters unless necessary. Especially in the "All Networks" and "Guest or Public" sections.

By the way, pay attention to the screenshot above. Near the profile that is selected for the network to which you are currently connected, there will be an inscription “current profile”. These are already network profile parameters. And we have an article on a slightly different topic. Now I will show you how to change a public network to a private one and vice versa in Windows 10.

Which network profile should I choose?

If your Internet is connected via cable from home router– then you can select the “Private” profile. And if the Internet is connected directly from the provider, then it is better to set it to “Public”.

Concerning Wi-Fi networks, then everything is simple here. If you trust the network (at home, at work, with friends) then you can select "Private". And if the network is somewhere in a cafe, hotel, store, etc., then of course we prohibit public access by selecting the “Public” profile.

Changing a profile from public to private (or vice versa) in Windows 10

There are several ways you can change your network type. First, let's look at the simplest one. This method is suitable for both Wi-Fi networks and Ethernet connections.

Open the settings, then go to the "Network and Internet" section. On the "Status" tab, click on "Change connection properties".

And simply change the network profile to the required one.

All is ready.

How to change the network profile of a Wi-Fi network?

You can get to the settings faster. Click on the connection icon and select "Network and Internet settings".

Change your network location.

After setup, the computer will either be available on the network or hidden.

Setting up a network location for an Ethernet connection in Windows 10

As I wrote at the beginning of the article, for an Ethernet connection (via network cable) You can also change the network location from “Public Network” to “Home Network”. And in reverse order.

In the same way, go to the settings and in the “Network and Internet” section you need to open the “Ethernet” tab. Click on the connection to open its settings.

All that remains is to select the required profile.

Instead of setting up a network profile, there may be an option to “Make this computer discoverable.” If you set the switch to the "Off" position, the computer will not be detected on the network (Public Network). And if you set it to “On”, the “Private Network” profile will be applied.

Some nuances

Often, due to an incorrectly selected network profile, it is not possible, for example, to configure . Since the TV simply does not see the computer on the network due to the “Public” profile installed. Or you can’t set up file and printer sharing. Therefore, on the network where you plan to exchange files and access media content from other devices, you need to activate the “Private” profile and, if necessary, configure it further.

To ensure your security, always prevent other computers from discovering your computer on a network unless you trust the network and can be sure that it is secure. Simply activate the "Public" profile, or click "No" in response to the question that appears immediately when connecting to the network.