How to remove unnecessary programs when you turn on your computer. How to enable or disable autorun programs in Windows? Video: uninstallation from Control Panel

How to disable startup programs m starting with the operating system? Hello admin! Installed two operating rooms two months ago Windows systems 7 and Windows 8, and now they both slow down and freeze, and take forever to load.

In Windows 7, I launched the built-in msconfig utility, went to the “Startup” item and disabled everything there: Skype (a program for communicating over the Internet), Download Master (file downloader), DAEMON Tools Lite (working with ISO images), Zune Launcher (phone program) and so on, by the way, I found one virus. Two weeks later I looked at startup, and some programs were there again. Do you know why this is so? I worked with all these programs for two weeks and upon startup they again installed their services in startup. What to do? My computer is powerful and can handle it, but it’s still a shame, a month ago Windows loaded in 15 seconds, but now it takes 40 seconds.
. The situation with it is better, after two weeks only a few programs returned to autoload without permission, but the programs that I reinstalled all quietly went into autoload.

Following your advice, I installed the AnVir Task Manager program, launched it, the program is good and does not allow anything to autoload and warns about everything, but what’s interesting is that I found the All Records tab in this program, and was stunned, there are 500 records there, and that’s all I have in startup! Andrey.

How to disable startup programs

Hello friends, it’s quite easy to disable startup of any program; you can do this using the “msconfig” utility in Windows 7 and the Task Manager in Windows 8. In addition, you can go into the settings of any program and uncheck the “Run when Windows starts” option. .

Another thing is a little more difficult - to prevent a certain program from being installed into startup on your computer, and this cannot be done without one good free program.

The whole secret is that most programs, when installed on your computer, will not ask your permission to go into startup, it will just go through and that’s it, and you won’t even know about it.

Today I will tell you two interesting stories, and at the same time we will find out how to disable startup programs in the Windows 7 and Windows 8 operating systems and how to prevent the program from starting up again.
If you have reinstalled the operating system and are actively using it, install various programs, drivers (printer, scanner, camera...) antiviruses and so on, then literally after a month there are so many of these programs that loading Windows is very slow. And the most important thing is that users simply do not know (and most are not interested) where to find all these programs that slow down the download operating system, they only realize it after Windows starts to load and work very slowly.

In Windows 7, you can disable startup programs using the msconfig utility built into the operating system.
Start, Run, msconfig,

In Windows 8, you can disable a program from startup directly in the Task Manager in a special Startup tab. For example, let’s remove from startup Skype program, call the Task Manager,

In my opinion, the most important mistake of users is that they control the startup of programs only using the tools built into Windows, which cannot show all the programs that are in startup, and even more so cannot stop the services of programs included in startup. When users install the AnVir Task Manager program, specially created to control startup, and see everything that is actually going on in their startup, they remain in shock for a long time after that, watching numerous unnecessary services and processes, sometimes even remote programs.
To emphasize the seriousness of the situation, I want to tell you this. Working for several years on the Windows 7 operating system in which it was installed licensed antivirus With latest updates, firewall and the AnVir Task Manager program (a program that monitors startup, which will be discussed later), I found myself in this situation about once a week. While working on the Internet, I often had to go to unfamiliar sites (like all of you), sometimes to look for drivers, and sometimes necessary information. So, during the day I was browsing a lot of sites and being on some web pages, harmless at first glance, the AnVir Task Manager program installed on me (which controls startup) quite often signaled me with this window:

saying that an unfamiliar program is rushing into my startup, and this is with complete silence and connivance. Such programs, my friends, are nothing more than a complete virus.
I foresee your question, what will happen if you don’t have the AnVir Task Manager program and the program quietly goes into startup? And it will be approximately what I described in my articles “” and “”. This is how we catch viruses with you.
True, with the advent of the Windows 8 operating system, the situation has become a little better; all programs that are in startup can already be seen more clearly in the Task Manager in the Startup tab. The system, according to Microsoft, is better protected and so on. Although a small problem remains. All programs, when installed, still quietly go into startup.

I’ll tell you another interesting case, in which I’ll tell you in detail how to disable startup programs.

One of my classmates asked me to reinstall his operating system and install the package free programs. Three months ago, he purchased a laptop with Windows 8 pre-installed. His entire family used this laptop, even without each family member. And now the laptop freezes, takes a long time to load and slows down. My friend agreed to my proposal not to reinstall the system, but to figure out the reason for the long loading time of the system.
To see all the programs that are in the startup of the new Windows 8 operating system, launch the Task Manager and select the Startup item. Friends, we look carefully at everything that is in my friend’s autoload, as we see what is not there. Please note that he even has two antiviruses installed

and this despite the fact that the Windows 8 system also has a built-in one, which can also work. Of course, in this case the computer will not boot in 4 seconds. My friend claims that he installed the second antivirus just for fun and then deleted it. But the facts say otherwise, the antivirus program works, delete the second one antivirus program correctly, through the “Install or change a program” panel

A more interesting picture of startup will open if we install the AnVir Task Manager program, official website http://www.anvir.net/. If after reading our article you want to download and install this program, then be sure to read our article, it contains more detailed description working with the utility.

Note: if you open the “All entries” item, then all files, drivers, services, registry keys will open, that is, quite redundant information for a novice user, but in fact you can figure it out (for example, I have about four hundred in startup all sorts of codecs and filters for working with video).

1) Drivers for C-Media sound card. It’s quite strange how they got here, because the built-in sound card on my friend’s Realtek computer, we disable the C-Media drivers from startup or remove them altogether.

2) DAEMON Tools Lite – good program for creating disk images and emulating virtual CD/DVD drives. They use it once a week, so it is not needed in autoload either.

3) The Download Master program is needed to download files, but the owner of the computer does not even know about it and has never used it, disable the program from startup, if necessary, launch it manually.

4) Skype (a program for communicating via the Internet), if you don’t use it all the time, uncheck it.

5) The process ZuneLauncher.exe belongs to the Zune program from Microsoft. Using this program, you can exchange files and synchronize music, images, video files on your computer and phone under Windows control Phone. The strangest thing is that my friend samsung phone on Android based and his wife and child too, which means he doesn’t need the Zune program at all. Disable the program from startup or, better yet, delete it.

In "Services" at the very top there are two services related to laser printer HP, we will not touch these services. The TeamViewer 8 service, which is a very good remote control program, is also available in startup. TeamViewer access(who is interested, read the article). But unfortunately, my friend doesn’t remember exactly who installed it and why. We remove it from startup, if necessary, you can start it like that, disable it from startup.

That's basically it.

We reboot the computer and after the reboot our Windows 8 literally came to life. In my opinion, all the problems were caused by the second antivirus program.

But what do we see, all our programs removed from startup ask to go there again, we kick them out through the door, and they climb out the window, what a misfortune.

Check the box Don't ask again about this startup item and click Delete. If you want, send the program to quarantine.
If you want to return the desired program to startup, you can do this in the settings of the AnVir Task Manager program.

In this way, with the help of this program you will instantly bring order to your startup.

Articles on this topic.

Automatic launch of a particular program when the computer boots up is convenient feature, and it's worth using if you have a basic set of applications that you always keep open. Some programs have their own settings in which you can set them to launch automatically every time you start Windows; others do not have such functionality, but the operating system allows you to do this. In this article we will look at how to disable startup programs using Windows and, if necessary, enable automatic launch of individual applications.

Starting with Windows 7, the standard “Task Manager” of the operating system has a lot of useful functions and serves not only to terminate frozen programs and diagnose the load on computer components. In particular, the “Startup” item has appeared in the “Task Manager”, which displays all programs that automatically start from loading Windows. To get to this point, call the task manager by pressing the Ctrl+Alt+Del keys and select the “Startup” tab at the top of the window that opens.

To disable startup of an application in Windows through the “Task Manager”, you need to right-click on a specific program in the list and select “Disable”.

Please note that the Task Manager also displays the impact of a specific application on the startup speed of the operating system. Through the "Task Manager" you cannot add new programs to automatic loading when the computer starts.

How to enable or disable autorun of programs through the registry

The registry allows you to access almost any function of the operating system. In particular, through it you can configure a list of programs that are automatically loaded when Windows starts. To do this, you need:

1. Press the Windows + R key combination on your keyboard and enter the command regedit;
2. Next in the registry, go to the following path:

HKEY_CURRENT_USER\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Run

It should be noted that according to the instructions above, program startup parameters are set for the user on whose behalf this moment The registry is being edited. If you want to set parameters for all users, in the left side of the registry editing window, right-click on the Run folder and select “Go to the HKEY_LOCAL_MACHINE section.” After that, follow the procedures to add or remove a program from the startup list.

You can enable autoloading of individual applications through a special folder. It is enough to place a program shortcut in it so that it automatically starts every time Windows boots. To go to this folder, just press the Windows + R key combination on your keyboard and enter the command in the “Run” window shell:startup.

It should be noted that this folder does not contain all programs that are set to start automatically when the operating system starts. You cannot disable system applications through it.

There are several ways, and each has its own advantages and disadvantages, so let's start exploring. The easiest way is to find the Startup folder in the Start menu. All shortcuts found here will be loaded with Windows. Depending on the language of the operating system, this folder may be called “Startup” or “Startup”.

As you can see, I have BingDesktop, Punto Switcher and SpeedFan loaded. To exclude a program from the Startup folder, you just need to right-click and delete the shortcut. But when Windows boots, many more processes and programs are launched than are presented in this folder.

Built-in utility for managing startup

This is the easiest and affordable way for Windows 7. To launch the “msconfig” utility, press the key combination “Win ​​+ R” and in the window that appears, enter the word “msconfig”

A window appears in front of us in which we need to go to the “Startup” tab. Here are all the programs in the autorun section registered in Windows registry 7.

What we see here:

• The startup item is the name of the program
• Manufacturer - software developer
• Command – path to the program with launch keys
• Location – the registry section or folder where this command is located
• Disabling date – respectively, the date when this item was disabled by you

Now we find the application in the list, uncheck it and click “OK”. Msconfig will prompt us to reboot, but we don't have to do this.

Managing startup in Windows 8/10

The beauty of this program is that it finds all possible places where something can be downloaded from and allows you to disable hidden programs with one click! And all this is completely free! No installation required, but will require confirmation during first launch license agreement by clicking the “Agree” button.

You need to run the file “autoruns.exe” or “autoruns64.exe” for 64-bit Windows. The second file, “autorunsc.exe,” is intended to be run in command line mode. The Autoruns window looks like this:

At the top there are tabs, each of which indicates the location of startup objects. These are not only programs, but also libraries (dlls), toolbars, widgets, drivers, services and much more. The first tab, “Everything,” presents everything in order at once. On the “Logon” tab you will find those programs that we could disable using previous methods.

In the middle part, in fact, there is a list of programs. To disable a program from autorun, simply uncheck it. If the checkbox to the left of an entry is unchecked, it means it is already disabled. Lines that are listed in startup, but their files have been deleted, are marked in yellow, i.e. they won't load anyway. Programs without a description (the “Description” column) or without a manufacturer (the “Publisher” column) are marked in pink, which seems to hint at a viral origin, but not necessarily that it is a virus.

By right-clicking on any line and selecting “Search Online...” in the browser, a search line will open with the name of the file to be launched so that you can analyze how safe the object being examined is. The bottom of the window displays more detailed information. I told you how to determine the trust level of applications.

Using the “Save” button on the toolbar, you can save the current startup state, and then compare it after some time to find out what new has been added. By the way, also very useful tool. I noticed that for some reason Autoruns does not check the launch parameters “userinit.exe” and “explorer.exe”, so it is better to check these keys manually, more on that later.

Editing autorun in the registry

Now we smoothly move on to manually editing the registry. Press “Win ​​+ R” and enter “regedit” in the line. The registry editor will open in front of you, in which you need to go to the startup section.

There are two of them:

• global for the entire system, from which programs are launched under any user: "Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run"
• current user's environment: "Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run"

We go to both sections of the registry in turn and find in the list on the right the application that needs to be excluded from autorun, and delete the entry using the right mouse button. Just below there is another section called “RunOnce”. These sections can contain commands for one-time execution, for example, to complete the installation of some software package. You can search there, but most likely it will be empty.

Unlike the “msconfig” utility, in the registry editor we can view more loopholes from where something can start. I'll show you the two most vulnerable spots, both of them are along the way: "Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon"

Pay attention to these two parameters:

It should be exactly what you see in the picture (paths may vary). If something else is written after “userinit.exe,” or after “explorer.exe,” it will also automatically start along with Windows. In 99% of cases it is a virus! Simply editing these entries is unlikely to help. After all, if a virus is in memory, it will quickly overwrite the recording again. Therefore, you will need a complete .

What else can you do?

If you tried all these methods, but still couldn’t find and disable the program, then look at services and the task scheduler. It is possible that the program is launched from there. Autoruns has corresponding tabs "Services" for services and "Sheduled Tasks" for scheduled tasks.

Without Autoruns, you can easily view services by pressing “Win ​​+ R” and entering “services.msc” in the window. The “Services” window will open in front of you, in which you need to look for the name of the program you are looking for.

How to launch the task scheduler and look for scheduled tasks there.

Another note for you:

• Most startup objects do not start
• if a program that has put itself in autoload is launched again, and it considers that it still needs to be in autoload, then it will register itself there again! Therefore, you need to look in its settings where you can disable autorun.

If you are using any other in an interesting way, then please tell me about it in the comments.

In some cases, autoloading can be very useful function. You can configure it yourself and leave only the necessary programs in startup.

It is worth considering that when large quantities active programs in startup, the computer's RAM is consumed in greater quantities, as a result of which system startup may slow down significantly.

Why are programs added to startup?

We have already said above that installed utilities can independently add themselves to the startup registry.

If necessary, the user can independently place any the desired program to autorun so that when you turn on the computer, the system automatically launches a frequently used utility.

Why clean the startup registry?

First of all, this manipulation should be performed if the computer system begins to “slow down” and loads very slowly. This way you can free up significant volume random access memory, the presence of which is an integral criterion for the quality operation of your computer.

Startup may also contain extremely important programs that contribute to the correct operation of the operating system. Therefore, you should be extremely careful when cleaning the registry.

Disabling startup in Windows 7

To the question of how to disable autoloading windows programs 7 there are several answers. Each of them implies a separate removal method.

Method number 1. Uninstalling via the Start menu

Users who have been using this version of the operating system for quite some time have probably wondered, “What’s hidden in the Startup folder in the Start menu?”

More advanced users have long realized that using this folder you can disable autorun programs. To do this, open the Start menu, go to All Programs, then find the Startup folder and open it.

If there are no third-party programs in startup, when you open the folder, it will say “(empty).”

If third party programs are present in startup, you can remove any of them yourself. For this purpose necessary program right-click and select “Delete”, after which the item will go to the trash, from which it can be permanently deleted using the Shift+Delete key combination.

This method is the simplest, but in this case it is impossible to see all the programs that are in startup. Some of them are hiding.

If clearing this folder does not help eliminate unwanted automatic loading of programs when you start your computer, we recommend using one of the methods listed below.

Method number 2. Using MSConfig

This program is present by default in any version of the Windows operating system. There are 2 ways to call it.

In the first case, open the Start menu and enter “msconfig” (without quotes) in the search bar. After the system detects it, double-click LMB to launch it.

IN alternative version startup must be started command line by pressing the Win+R hotkey combination. In the window that appears, enter the command “msconfig” (without quotes) and click the “OK” button.

After launching the utility, a window will open in which you can remove programs from the startup registry.

To do this, go to the “Startup” tab, and then uncheck the boxes of the applications that you want to disable. Disabling unnecessary programs, click the “Apply” and “OK” buttons.

Attention!

After this, you will be prompted to restart your computer, automatically sent by the system. It is not necessary to restart your computer, so in this case the choice is yours.

No installation required when using this method additional programs, since MSConfig is a standard pre-installed utility for all versions of the Windows operating system.

Nevertheless, this method will not allow you to remove absolutely all programs and applications from autorun, so we advise you to consider the methods given below.

Method No. 3. Manual removal from the registry

You can also launch the registry in two ways - through searching the Start menu or the command line.

In this case, you need to enter the command “regedit” (without quotes). After launch, the main registry window will open in front of you.

On the left side of the window there are two autorun partition folders - local and personal. For the first one the address is used:

Computer\HKEY_LOCAL_MACHINE\Software\ Microsoft\Windows\CurrentVersion\Run

And for the second:

Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

To clean the registry of unnecessary applications, we need to get to the final folder (“Run”), going through the “tree” of folders as indicated in the address.

To remove applications from startup, right-click on its name, and then select “Delete” in the context menu.

Cleaning is required in both sections.

Method number 4. Use of third party programs

In this case, we will use the program, which is freely available to all users on the official website. The utility is easy to use, takes up a small amount of memory on your hard drive, but at the same time it is the best solution to clean autostart.

On the developer's website the program is provided only on English language. We will tell you how to use it correctly without knowing foreign languages.

The program is downloaded in a ZIP format archive, which can be unzipped using any archiver (7zip, WinRar, etc.).

After you unzip the downloaded file, you will be presented with four shortcuts in the window in front of you. To install the program, we need the autoruns.exe file, which must be run as administrator.

When you first launch the application, you will be required to accept the license agreement by clicking the “Agree” button.

After this, the program window will open. This means that the utility does not require installation on the computer system.

By default, when launched, the application window will open the “Everything” tab. It presents all, without exception, programs and applications included in autorun.

For the convenience of users, there are also tabs in which applications are divided into categories (Winlog, Driver, Explorer, etc.).

To remove autorun, you need to uncheck the box next to the unnecessary application. If you select a line with a single left-click, then from the bottom of the window you can see information about the program that is in startup (version, size, path, etc.).

When you go to the “Logon” tab, you will see a list of programs that were previously disabled by other means.

Attention!

The links provided lead to trusted sources and do not carry malicious files or viruses. We under no circumstances recommend downloading programs from dubious resources, as you can cause irreparable harm to your computer system.

Disabling in Windows 8/8.1

In this version of the OS, there are also several ways to disable startup programs.

It is worth considering that in Windows 8/8.1 startups may contain elements responsible for the operation of the operating system, so you should disable them with extreme caution.

Attention!

If you do not know what an application is responsible for, it is not recommended to disable it yourself, as you may disrupt the correct operation of the operating system.

Method number 1. System partition

To go to the system partition, you first need to open the command line by pressing the Win+R hotkeys. In the window that opens, enter the command “shell:startup” (without quotes) and press the “OK” key.

The window that opens will display startup data for the current user.

To view startup registry data for all users, enter the command “shell:common startup” (without quotes) into the command line.

The window that opens will display startup applications for all users who have an account on this computer.

To disable startup, delete folders of unnecessary applications.

Method number 2. Disable using task manager

In operating systems version 8 and higher, the task manager can be called not only in a standard way(Ctrl+Alt+Delete), but also by calling the context menu by right-clicking on the control panel, in which you need to select the item "Task Manager".

In the task manager window, go to the “Startup” tab.

This tab will display all applications that are in the startup registry. To turn off automatic download programs, select the unnecessary program RMB and select “Disable”.

Method No. 3. Disabling program autorun through the registry

The registry can also be opened using the command line, which is called by pressing the Win+R hotkeys.

In the Run window, enter the command "regedit"(without quotes) and click OK.

In the window that opens, you need to follow the specified path:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run

then disable unnecessary applications and remove their components from the computer system.

Method number 4. Disabling using the scheduler

The scheduler also needs to be called via the command line. To do this, enter the command “taskschd.msc” in it, then press the Enter key or the “OK” button.

The scheduler specifies the launch time and date of each application.

Look at the programs that are running at startup and, if necessary, disable unnecessary ones, then simply close the scheduler window.

Startup Windows 10 programs

In order to understand the question of how to disable autorun of Windows 10 programs, you won’t have to look for an answer for long - in this case, absolutely all methods of disabling autorun of Windows 8/8.1 are suitable.

The only positive difference of this operating system is that in autorun, the elements responsible for the correct operation of the OS itself are stored only in the registry, so absolutely all programs can be deleted from the autorun list.

This solution will speed up the computer boot as much as possible and improve system performance.

Conclusion

When starting the operating system, the download speed is directly affected by the number of programs that have an autoload function (Skype, Viber, Torrent and others).

To reduce consumption system resources, you should determine which programs and applications you need immediately after starting your computer, and which you can launch later yourself.

This way you can significantly improve system performance.

This effect is achieved by freeing up RAM. Computers of schoolchildren, elderly people and insecure PC users are most often susceptible to overloading of the startup registry.

Please note that if you are not familiar with the applications responsible for the correct operation of the operating system, you must disable startup programs carefully so as not to harm the computer. Or you should contact specialists.

Automatic activation of programs when Windows startup- this option is very useful when it comes to essential programs. The user frees himself from the routine operations of launching one by one (clicking on shortcuts) to open network clients, instant messengers, text editor. Everything you need is loaded immediately - the computer is configured to work in the way the user wishes, and without his participation.
Comfortable. Definitely.

But if there are too many programs in startup, certain difficulties arise:

• The computer takes much longer to start;
• the system “slows down” due to programs that are launched automatically and “hang” in the tray;
• wasteful consumption of computer hardware resources: some startup applications are enabled, but the user accesses them extremely rarely.

In this review, we will talk about how to disable autorun programs in Windows using built-in and third-party tools.

Program settings

When you need to deactivate the autorun of a specific application, first look at its settings. Many programs provide an option that allows you to disable autoloading.

Let's look at the shutdown using specific examples:
In the uTorrent torrent client: Menu → Settings → Program settings → General → option “Run... with Windows” (you need to remove the “bird” in the window)

To remove Skype messenger from startup, open its menu:
section "Tools" → Settings → General settings→ function “Run... when Windows starts” (uncheck the box with a mouse click).

Standard option

In the “System Configuration” system panel, Windows allows the user to independently disable autorun programs. This procedure is performed in just a few mouse clicks:

1. Click on the “Start” button in the taskbar.

2. B search bar menu type - msconfig. Press "Enter".

3. In the “System Configuration” window, click the “Startup” tab.

4. In the list, remove the “birds” next to utilities, programs, and gaming applications whose launch you want to deactivate.

5. Press the “Apply” and “Ok” buttons successively.

Editing the Registry

Intervention into the system registry in order to remove programs from startup must be used when for some reason the msconfig option and third-party tools cannot be used. Editing requires the user to have certain skills and experience working in the registry editor. Because if you perform the procedure incorrectly, you can disable the system.

To remove startup keys, do the following:
1. Click together on Win keyboard+R.

2. In the “Open” line, type the directive - regedit. Click "OK".

3. If you want to disable automatic software launch for everyone accounts, open a "branch":
HKEY_LOCAL_MACHINE → SOFTWARE → Microsoft → Windows → CurrentVersion → Run

To configure autoload in the current account:
HKEY_CURRENT_USER → Software → Microsoft → Windows → CurrentVersion → Run

4. In the second panel of the editor (Name/Type/Value), right-click the key of the required application and select “Delete” from the menu. After activating the command, it will be removed from the startup list.

Startup folder

1. Open the Start menu. Scroll down the list a little.

2. Find the Startup folder. Right-click on it and select "Open".

3. In the window that appears, remove shortcuts to unnecessary programs: using context menu(“Delete” option) or by dragging it to the “Trash.”

Special programs

You can also remove a program from startup using special maintenance utilities. This approach has certain advantages: there is no need to study OS settings, fast access, convenient alternative interface, etc.

We present to your attention two popular special utilities that allow you to remove a program from startup.

CCleaner is a cleaning program. Its main functional task is to clean file directories and the registry from software garbage. But among its additional options is configuration Windows autorun. Free version The CCleaner distribution can be downloaded from ccleaner.com.

After launching and installing the program, follow the steps below:

1. Click the “Service” section icon. In the submenu (adjacent column), click “Startup”.

2. Click on the application in the list that you want to remove from automatic launch.

3. Click one of the buttons:

• “Disable” - temporary deactivation;
• "Delete" - complete removal from the list.

Autoruns is an advanced tool for managing modules, services, processes and system startup. Developed by Sysinternals and acquired Windows developers(by Microsoft Corporation). Captures all running software objects in the system. Recommended for use by experienced users.

To configure startup using Autoruns:
1. Go to the official download page - https://technet.microsoft.com/ru-ru/sysinternals/bb963902.aspx

3. Extract the archive:

• right-click on the Autoruns archive volume;
• option in the menu “Extract to current folder”.

4. Once unzipping is complete, run the autoruns.exe file.

5. In the utility window, go to the “Everything” tab.

6. In the registry sections “... CurrentVersion\Run”, uncheck the boxes next to the programs that you want to remove from startup.

7. Upon completion of the procedure, close the utility, restart the computer and check the changed autorun setting.

Viruses in startup

Many viruses (browser hijackers, miners, adware, etc.) are “registered” in the system bootloader. And in some cases, their automatic start cannot be turned off either. regular means systems, nor third party utilities. After the user turns them off at startup, they still turn on again.

That's why In case of virus infection, anti-virus tools must be used to adjust startup.

The most effective in solving such problems:

A tiny but extremely useful anti-virus scanner. Capable of destroying pests not only in the startup list, but also in browsers, programs, system registry.

Distributed free of charge on the offsite https://ru.с/adwcleaner/.

After launching and completing the AdwCleaner update, click “Scan” in its panel. Then remove any virus objects found and restart Windows.

Helps with severe virus infection of your PC. Can detect malware that remains invisible to the main antivirus running on the system. Successfully detects many types of digital infections (worms, Trojans, rootkits).

To download the scanner, use the “Free download” button on the page https://ru.malwarebytes.com/. The scanning is started in the “Check” menu: Selecting the scan mode → Settings (if necessary) → Launch.

Regularly monitor your system startup settings. Especially after installing a new one software, games. Disable automatic launch of rarely used, unnecessary programs. Otherwise, they will consume computer resources without any benefit. And on low-power systems can cause crashes, slowdowns Windows operation.

Successful PC setup and comfortable use of the operating system!