How to make a bootable USB flash drive in UltraISO: step by step instructions. Creating a bootable USB flash drive in the UltraISO program Installing windows 7 from an ultraiso USB flash drive

Often, installing the Windows operating system with USB flash drives is the only possible solution for owners of devices (netbooks, nettops, and others) where there is no floppy drive, and external USB drives, although they are the most widespread in the consumer electronics market, are still not available to everyone. In addition, this method is largely justified and has a number of advantages (compactness, reliability of data storage, high reading speed) even in comparison with traditional way installation if you have a CD\DVD drive.

So, in order to install Windows on a nettop or laptop (netbook) in the absence of a disk drive, or if you just want to have a distribution kit with one or another release of the operating system always at hand, you will need to burn a bootable USB flash drive. One of the simplest, and most importantly, working options is to write bootable USB flash drive using the UltraISO program.

Despite the fact that the program belongs to the category of shareware, in order to create bootable flash drive With operating system The free (trial) version of UltraISO (Russian version) is also quite suitable, you can download the program.

Next, as an example, consider the process of creating a bootable USB flash drive for 64-bit Windows 8.1. Please note that the method described here is only suitable for Windows 7 and Windows 8 operating systems, for Windows XP this process is slightly different.

Download and run the program, such a window will appear, select "Trial period ..." here.

The main program window will open, in the menu select: File → Open,

after which we find the image file with the .iso extension (or may be different: IMG, MDF, NRG, etc.) in Windows Explorer(it is assumed that we already have a virtual image of the operating system on the hard disk of the computer) and click "Open".

At the next stage, select the menu item "Boot" → "Burn image of the Hard disk ..."

This window will appear (if you have not inserted a USB flash drive, now is the time to do it).

Here you need to pay attention to the “Writing Method” item, UltraISO developers recommend choosing USB-HDD +. Here it is worth explaining that the recording method offered by the program at this step, namely: USB-HDD, USB-ZIP, USB-HDD+, USB-ZIP+, USB-HDD+ v2, USB-ZIP+ v 2 are emulation modes of the corresponding devices. For example, the main difference between the USB-HDD method and the USB-HDD+ method is that when using advanced mode (USB-HDD+), the bootable flash drive is more likely to be compatible with BIOS addition or other computer (laptop), etc. than when using a basic USB-HDD. In turn, USB-HDD + v2 will ensure the compatibility of your bootable USB flash drive with almost any, even very specific BIOS, so we recommend using it right away.

We also note that when using UltraISO there is no need to format the USB flash drive in advance, the program will do everything by itself, the only thing before inserting a USB flash drive and starting recording, make sure that there is no important information for you on it. However, after you click "Record", the program will warn you about this with such a message.

We are waiting for the end of the recording process, upon completion we get a universal bootable USB flash drive with which we can easily install the Windows operating system (in our case, Windows 8.1) on any computer, laptop, nettop, etc.

The actual process of installing an operating system from a USB flash drive is no different from that via a disk, however, in order for everything to work, you must correctly set the device boot priority in the BIOS of your computer.

In order to install the Windows operating system, you need a boot disk or a bootable USB flash drive. Almost everyone now has a USB flash drive, so it’s easier and more convenient to make a bootable USB flash drive. There are many ways and programs to create a bootable USB flash drive, such as Windows 7 USB DVD Download Tool. One of the most popular programs is Ultraiso. First, you need to download and install Ultraiso, download at HDD image of the operating system that you need to install and insert the USB flash drive into the USB connector. When all this is done, you can proceed:

Launch Ultraiso
	We launch the Ultraiso program. Please note that it must be run with administrator rights.
Opening the Windows Image
	Now you need to open the image of the Windows operating system, which we will write to the USB flash drive. To do this, select Open from the File menu. You can also use the keyboard shortcut Ctrl+O .
	Open the folder with the Windows image, select it and click on the button Open.
Start writing the image to a USB flash drive
	When the image file is open, select the menu item Burn Hard Disk Image.
	We select the flash drive on which we will write the Windows image (in my case (E:, 8GB) JetFlash Transcend 8GB), the recording method is usually USB-HDD. When everything is selected, click on the Write button.

	All information on the flash drive will be deleted. Confirm this and click on the Yes button.
	The process of writing an image to a USB flash drive takes several minutes. You can drink tea :)
Bootable flash drive successfully created
	At the end, a message will appear stating that the recording is completed. In order to close the window, click on the Back button, then you can close the program. The bootable flash drive has been successfully created.

In our time, the use of disks is no longer popular, since many PCs and laptops are produced even without a disk drive. For this reason, the question of how to make a bootable Windows flash drive 7 (UltraISO or another program will be used - it's up to you), as relevant as ever. Let's see what you need to have to create it and what you might need such a bootable flash drive for.

Possible and problems

Using an operating system such as Windows can be accompanied by various unforeseen problems and malfunctions. The operating system often starts to work with serious failures, and sometimes even stops loading. It is impossible to insure yourself against such a situation, as well as to predict such a state of affairs.

It happens that problems with the operating system are eliminated by the usual system restore function. To do this, simply run it, unless, of course, you made save checkpoints, and this system was running for you. If there is no way to start recovery, then Windows 7 will be able to save the situation. Of course, you can also run from a Windows disk, but a flash drive is more convenient and mobile. Moreover, in netbooks, for example, there is no disk drive.

Reinstalling the system - solving the problem

It is not uncommon for a serious problem to be fixed only by reinstalling your OS (a Windows 7 bootable USB flash drive image is also suitable for this), if you did not have the function enabled Reserve copy Windows and data. A disk or flash drive with an image can be used for recovery, and for reinstallation, and for installing the system again.

Benefits of a flash drive

Most often, of course, the distribution kit with the operating system is recorded on a regular DVD. But, you see, now it is no longer relevant. Yes, and storing an OS image on such a disk is quite difficult due to the fact that it can easily be damaged by any mechanical impact. Just one small scratch can render a drive unrepairable, and so can your system. Windows 7 bootable flash drive ISO image on it) will be a way out of this situation. Installing the Windows system from a USB flash drive is no different from the usual process for installing an operating system from a disk.

A USB drive with an OS image is better protected from various kinds of damage than a DVD disc. In addition, the flash drive is smaller, easily moved without any problems and damage.

Main question

And, of course, the main question is how to make a bootable Windows 7 flash drive. UltraISO is one of the programs that will help you quickly and easily create an image of any disk. In addition to it, there are also other applications for these purposes. But we will talk, as you already understood, about the UltraISO program.

Tricks of the program

This program is paid, but nevertheless has some trial free period of application. You will be able to use free version UltraISO, but with one limitation - the file size of your image should not exceed 300 MB. Yes, this is such a tricky program. A bootable Windows 7 flash drive, no doubt, will not fit into these megabytes. So the portable (portable) versions of the UltraISO program will be the solution.

Rules for creating an image for a flash drive in UltraISO

So, we come to the main issue of this article. How to create a bootable Windows 7 USB flash drive using UltraISO. By the way, in a similar way, you can write to it the image of the now popular Windows 8.

To create a bootable flash drive in this program, you first need to run it with administrator rights. After that, click "Open" at the top of the UltraISO program window panel. Next, in the explorer window that opens, you need to select the image of the Windows operating system for its further recording on a flash drive.

In the window called "Open ISO file" you must select the image of your operating system and click on the "Open" button. If you are interested in how to make a bootable USB flash drive for Windows 7, UltraISO will give you the opportunity to choose an image of the Windows 7 OS, as well as any other: Vista, XP, Eight. Further in the program window, on the right side, an image of the necessary operating system appears. Now connect your flash drive to the PC via USB, if you haven't already done so.

Features of a flash drive and its formatting

It is important to note that a flash drive for recording an image of the popular Windows 7 or G8 operating system must have a memory capacity of at least 4 GB, and must also be formatted in the FAT32 file system. In order to also use the UtraISO program right before starting to burn the image.

note

Remember that if there is any data on the flash drive that you need, and you do not want to lose it forever, then copy it somewhere before formatting. After all, this procedure will delete all data from it.

Next steps of creation

After that, in the program window, click on the "Bootload" button, and then in context menu select the item offering to record the hard image. Then, after the window with the name "Burn disc image" appears, you must make sure that right choice disk to form a bootable flash card with an operating system. You must be sure that the flash drive is located on the correct letter of the alphabet.

Next, in the "Write method" item, click "USB-HDD +", and then proceed to format the drive or directly record the image of the Windows 7 operating system. If the flash drive was formatted in advance, before recording the image, then you simply click "Burn". If in advance you then first click on "Format".

Formatting process in UltraISO

So, let's look at the steps for in this program. In the "Formatting" window, you need to select the FAT32 file system, and then click "Start". Then click OK in the warning window. Formatting, as already mentioned, destroys all data on the flash drive.

After completing this process, a window will appear in which you will be informed about the successful completion of the operation. Click OK again and close the formatting window.

The next step is to go to the Write Disk Image tab and click "Write" to start creating a flash drive with the image. You will see a "Hint" window, which will warn you that all data from the card will be deleted. Click "Yes". Now the recording process has begun. The write speed of a USB flash drive with an image directly depends on the capabilities of your PC. After a while, the image will be written, which you will learn from the Write Disk Image tab, where a notification will appear that the recording has been completed. Well, here you have learned how to make a bootable Windows 7 flash drive. UltraISO can be closed, it has already done its job.

Finishing touches

After all of the above and done, you need to open the "Explorer" and make sure that the image of the Windows operating system is actually written to the drive. If you open the flash drive, you will see the system image there. As mentioned earlier, the process of creating an image of another version of the OS is no different from this. In order to install the operating system, in the BIOS you will need to enable the priority of loading the OS from a USB drive.

Now you are not afraid of any failures and malfunctions, because there will always be a working bootable USB flash drive with a system for restoring or reinstalling Windows, which will allow you not to waste time looking for a new image if any problems arise. The last fact is very important in our dynamic time, when every second counts. In addition, such a solution will be relevant for those who make money on installations and reinstallations of operating systems. Agree, because it is much more convenient to carry a flash drive with you, and every PC has USB outputs.

Every year regular CDs or DVD discs become less popular, they have long been replaced by external rigid discs, USB drives and memory cards. In this connection, manufacturers of laptops and computers have begun to equip their devices with built-in drives less and less.

In turn, this causes a number of problems, for example, when it is necessary to perform a Windows installation. On this account, many programs have been developed that can burn the image of Windows 7, 10 to a USB flash drive.

These include UltraISO, distributed in two versions: free and paid. Let's look at it in more detail and create our first bootable USB flash drive.

Before you start

Before you start working with the utility, you need to download it in Russian or any other language convenient for you from official site by clicking on the green Download button. In most cases, the free version is sufficient.

I do not recommend downloading the utility from torrents, file hosting and other dubious services. Since there is a possibility of catching a virus that can not only destroy your current system, but will also be installed by default with a new ISO image.

After the download is complete, run the downloaded "EXE" file and complete the installation.

Also, pre-download the required ISO distribution of the operating system.

Create a bootable USB flash drive using UltraISO

Now that you have installed the program, run it as an administrator by right-clicking on it. This will help you avoid future problems.

Then follow the following instructions for working with UltraISO:

IN top menu click on the "File" button and select "Open". You can also use the hotkeys "Ctrl+O".
Select the Windows image that you want to write to the flash drive and click "Open". Make sure it's on one of the partitions hard drive but not on a USB stick.
A structure with all the files will be displayed, but by and large it is not important to us, so we move on.
In the top menu, move to the "Boot" section and click "Record ...". Each version of the application may have its own translation, and therefore the names of the items may differ slightly. Be sure to consider this point and, in which case, look for similar item names.
In the "Disk Drive" column, select the USB drive and click on the "Format" button.
in a new window as file system set "FAT32", all other options can be left untouched and click "Start". It should be understood that the formatting process will delete all data on the USB drive, so first save all important information in the other place.
After formatting is completed, close this window.
In the main window, set the recording method to "USB-HDD +", without changing all other parameters, click "Burn".
Confirm the action by clicking on the "Yes" button.
After that, UltraISO will start creating a bootable USB flash drive, wait for the process to finish. It usually lasts 5-30 minutes, it all depends on the speed of the drive and USB port to which it is connected.

After UltraISO successfully completes the capture of the Windows image, you can close the application and proceed with the installation.

By the way, some users simply extract all the files from the ISO image using an archiver and transfer them to a USB flash drive. I want to note right away that this method does not work and it will not work to boot from such a drive.

The method discussed above is universal and suitable for all versions of operating systems. Therefore, with its help, you can also burn the Windows 10 system image to a USB flash drive through the same UltraISO program.

The second way: when there is only a folder with installation files

If for some reason you are not ready boot image or a CD with the operating system, but there is a folder with installation Windows files, then you can create a bootable USB flash drive using them as a basis.

How to do it with UltraISO:

After the process is successfully completed, you can restart your computer and begin installing the system.

The third way: when there is only a boot disk

And the last third option will be useful when there is an installation CD with Windows system. In this case, using UltraISO, you can make a bootable USB flash drive using it as a basis. In this case, you will not need to create a separate ISO image of this disk, which will save a lot of time.

Detailed instructions:

Upon completion of the process, you will receive a completely ready-to-use drive.

What problems can you face

Usually, the process of working with the UltraISO utility goes smoothly, but in some cases, problems and additional questions may arise. Let's take a look at the main ones.

Unable to create bootable USB flash drive with Windows XP distribution. The solution is to use the WinSetupFromUSB utility or roll back the current date in the BIOS to 10 years ago. After installation, you can return the current date.
Decreased volume USB media or it is recognized as a CD-ROM. In this case, formatting with the ImageUSB utility, which I reviewed at the very end of the article about, will help.
Some users try to burn several distributions at once, unfortunately this is not possible.
The program hangs or freezes during the recording process. Most likely a problem on the side USB drive check if it works.
Sometimes it becomes necessary to create a multiboot USB flash drive with a large set of utilities. In UltraISO, there is only one way to make such a drive - to write a ready-made multi-boot image. But you can't create it on your own. The WinSetupFromUSB utility can help here.

I tried to write the most detailed article, I hope that I succeeded and now you know how to use the Ultra ISO program and can independently apply it in different situations.

If you have additional questions, ask them, I will help in any way I can.

Detailed video instruction

Modern laptops are less and less equipped with a CD-ROM drive. And such devices as netbooks and disk drives do not occur at all. Discarding the drive allows you to do mobile device lighter and thinner. But, at the same time, users face some difficulties in their work. For example, in order to install Windows 7 on a device without a drive, you have to create bootable USB flash drives. In this article, we will talk about how to write a Windows 7 image to a USB flash drive via UltraISO.

Step #1. Open the Windows 7 image in the UltraISO program.

In order to write a Windows 7 image to a USB flash drive through a program, you must first open this image. To do this, launch UltraISO, open the "File" menu and select "Open" from there.

As a result, you will see a standard window for selecting a file. Here you need to select the ISO file with the Windows 7 image that you want to burn to a USB flash drive.

After that, files from the selected disk image will appear in the UltraISO interface. It is better not to touch these files, otherwise the bootable USB flash drive may not work.

Step number 2. We connect the USB flash drive to the computer and start recording the Windows 7 image.

Next, you need to connect a USB flash drive to your computer, on which you plan to burn the Windows 7 image via UltraISO. To do this, simply connect the USB flash drive to any port and wait until the system detects it. After connecting the flash drive, return to the UltraISO program. Now you need to open the "Boot" menu and select "Burn Hard Disk Image".

After that, a window for burning a disk image will open. Here you need to select the flash drive on which you want to burn the Windows 7 image. Select the desired flash drive, and click on the "Burn" button.

After that, the UltraISO program will warn you about deleting all data from the USB flash drive and, if the user agrees, will start writing the Windows 7 image to the USB flash drive.

Step #2: Wait for UltraISO to finish burning the image.