Netis login to your personal account. Connecting and setting up a Netis router. Brief instructions for setting up the netis wf2780 router

1. Connect the power cable to the router and plug it into a power outlet. Connect the Internet cable brought into the apartment to the WAN socket on the router.

2. Connect the network cable that comes with the router, one end to any LAN socket of the router, and connect the other end to network card computer.

If you want to configure the router via Wi-Fi, then connect to wireless network which will appear after turning on the router. It may be called "netis_A508B3" and may require a password to connect to the network. The network name and password are indicated on the back of the router.

3. If the computer was connected via cable, then you need to enable automatic receipt of IP address and DNS server settings, this will help you.

4. Open any browser. In the address bar, enter the IP address of the router http://192.168.1.1 or http://netis.cc and press Enter or "Go". The router settings page will open.

5. Select Russian from the list of languages

6. In the "Internet connection type" menu, select " Static IP" and enter settings given to you upon connection.

7. For settings Wi-Fi networks in the “SSID” field, enter in English letters any name for your network, for example login, “Security” set to On. and set a password for connection (minimum 8 characters).

9. If you are using IPTV, you will need to open advanced settings: click “Advanced”

On the left, click “Advanced” - “IGMP”, “Status” select On. and click "Save"

To configure the set-top box in STB mode, on the left select “Network” - “IPTV”, “IPTV Mode” select Bridge, “IPTV Port” - LAN1 and click “Save”

Then connect the set-top box to the LAN1 socket on the router and network settings set-top boxes, indicate the parameters given to you when connecting to IPTV

To be honest, until now I was not familiar with Netis routers. I bought the Netis WF2411 model to see what kind of devices they are, and to prepare several instructions for setting up these routers for the website. And in this article I will tell you how you can enter the settings of your Netis router. There is nothing complicated there, but I have already seen similar questions several times, so I decided to prepare a short instruction on how to get into the Netis control panel. As you already understand, I will show you using the Netis WF2411 as an example. But if you have a different model, then the process itself should not be different.

After entering the settings, you can set up the Internet, Wi-Fi network, set or change the password, etc. By the way, for all these points I plan to prepare detailed instructions, which I think will be useful to many. Compared to other routers, the Netis login process to the settings page is no different at all, so if you already have experience, then there should be no difficulties.

Open the Netis router settings at 192.168.1.1

First, we need to connect to the router. If you want to access the control panel from a computer or laptop, you can connect to the router using network cable, which comes with the kit. On the router we connect the cable to the LAN connector, and on the computer to the network card.

You can connect and go to settings via Wi-Fi network. Just connect to your router's wireless network. If the router is new, or you have just reset the settings, then the standard Wi-Fi network name will be something like this: "netis_C2323B" (standard name (SSID) is indicated on the sticker on the bottom of the router). The default Wi-Fi password I had was "password". This information is also indicated on a sticker on the bottom of the device. The address for accessing the Netis router settings is also indicated there.

Simply connect to this wireless network from your laptop or mobile device.

Go to settings via browser

If, after connecting to the Netis router, you see a yellow icon next to the Internet connection icon and the status “without Internet access,” then this is quite normal. It’s just that the router hasn’t been configured yet, and you don’t need the Internet to enter the settings.

After connecting, open any browser and type the address in the address bar 192.168.1.1 , http://netis.cc, or 192.168.1.245 (on new models). As you can see in the screenshot above, the route does not contain the address 192.168.1.1, but only http://netis.cc. But it opens the settings without any problems. Type or copy the address and go to it. New devices have an IP address of 192.168.1.245.

The quick settings page will immediately open.

You can change the settings language to Russian. And to open more settings, just click on the button Advanced.

This is what the advanced settings look like:

I really liked the control panel itself. Simple, nothing superfluous, there is a Russian language (Tp-Link, hello), and an excellent page with quick and most important settings, on which you can configure your Netis in almost a few clicks of the mouse. And if necessary, you can go to the advanced settings, and just as quickly return to the quick settings.

netis.cc or 192.168.1.245 and login/password guest

Update: On new models of Netis routers, the web interface (the settings page) is already protected with a login and password by default. Login (User Name) – guest, and the password (Web Password) is guest@XXXX. Where is XXXX the last four characters of the router's MAC address.

You will be prompted to enter your username and password in your browser after navigating to http://netis.cc or 192.168.1.245.

The IP address itself has also changed. Already using http://192.168.1.245. Or the old hostname http://netis.cc.

The web interface itself has also changed a bit.

In terms of security, this is a good solution. I mean setting the guest login and password to the factory settings. In addition, the password on each router will be different, since the MAC address of each router is unique. Previously, by default, the settings of Netis routers were not protected at all. And few people set this password during the router setup process (although I write about this in every instruction). And if the settings are not password protected, then anyone connected to the router can access the web interface.

But on the other hand, now the process of setting up a router has become a little more complicated. You don’t just need to connect everything and type the router’s address in the browser, but also enter your username and password. According to my observations, this causes difficulties for ordinary users.

What should I do if I can’t enter Netis settings?

It may also be that when you try to open the address 192.168.1.1, 192.168.1.245 or http://netis.cc, you will see a message that “The page is unavailable” or “The page cannot be opened.” Some tips for a solution:

First of all, look at the tips from the article, which was written specifically on this problem:
Be sure to check whether you have set the automatic acquisition of an IP address in the connection properties. I described in detail how to do this in the article linked above.
Check if your router's power is turned on.
Check cable connections. It may be that you mistakenly connected the cable not to the LAN connector, but to the WAN.
If you can’t access the Netis router settings via cable, then try via Wi-Fi. And vice versa.
Try opening the web interface from another computer, if possible.
Reset your router and try going to http://netis.cc again.

That's all. I hope everything worked out for you. Best wishes!

Regular users need high-speed Internet access with a stable wireless signal and a large range, so all additional complex functions are unnecessary. The Netis router, which also has affordable price And high quality assemblies. Below is a guide on the connection procedure and setting settings using the Netis WF2411E router as an example.

The web interface of the device is simple and well thought out and, most importantly, it is Russified, so setting up a Netis router will not cause any difficulties even for novice users.

The instructions below are universally applicable to all Netis models. The Netis router is very easy to connect and enter settings.

The procedure for connecting the device to a PC, laptop or mobile device

Before setting up, the device must be properly connected.

The following sequential steps must be taken:

The connection instructions described above are preferable and will eliminate possible failures during subsequent settings. However, if you do not have a computer, it is quite possible to enter the necessary parameters using the connection of any mobile device to the router via wireless technology. As soon as the router is turned on, it will immediately begin broadcasting its Wi-Fi network with a name, for example, “netis_C2323B”. All you need to do is connect to it using the “password” code from a smartphone or tablet and enter the equipment interface. The login name and password are written on the bottom of the device.

Sometimes the specified access codes and login do not work. This happens when the equipment has previously been configured and used in the provider’s network. In this case, it is recommended to reset the device to factory settings. For this purpose, you should simply press and hold the special “Reset” button, recessed in the case, for about ten seconds.

Login to settings

The procedure for logging into the router interface has absolutely no differences from other routers, so users who already have similar experience will cope with the process even without instructions.

The following several steps are required:

Settings

You can quickly enter settings as follows:

If you need detailed settings, you need to click “Advanced”.

After this, a window will be displayed with all the sections arranged in the left menu block, and the main interface window is used to enter parameters for the operation of the equipment.

Section "Network"

The router can operate via a wired connection and Wi-Fi. When you open the “Network” tab, you can select any of these connection methods.

The remaining parameters will appear next. For example, if you are using a Wi-Fi network, a list of networks will be displayed, and when a cable connection is made, you should select the WAN type. The “LAN” subsection is also located here, where IP and DHCP are entered. Some modifications of "Netis" provide an IPTV connection, which is turned on by specifying the "Bridge" mode and entering the used LAN connector.

WiFi mode

To enter WiFi settings, you need to enter the “Wireless Mode” section, where you indicate the name of the WiFi being created, its access code, type of encryption protection, channel width, etc.

After completing the adjustments, click on “Save”.

In the future, when connecting devices to the created network, you will need to specify the name and password entered in this window, so it is strongly recommended to write them down in a notepad, since even the worst notepad is always better than the best memory.

The topic of today's article is setting up a Netis router via the login site Personal Area netis.cc. I’ll show you how to connect a computer to Netis and set up a wifi network, as well as how to change the default password and set your own on official firmware. I will show the whole process on the Netis WF2780 router, but in general, the instructions are universal for any model - wf2419e, wf2880, mw5230, wf2180, wf2710, wf2409e and so on.

How to connect the Netis WF2780 WiFi router to the Internet?

In order to log into the personal account of the Netis router, you first need to reset all network configurations on the computer itself. To do this we need to go to settings network connections and make sure that all the checkboxes are in “Automatic” mode (IP address, Subnet mask and DNS servers)

After this, we connect the Netis router to an electrical outlet using the power adapter that came with it. We insert the cable from the Internet provider into the WAN port (on this model it is blue), and the cable with which you connect the router to the computer into the LAN port

Login to your personal account NETIS.CC – 192.168.1.1

To log into the Netis router, launch the browser and go to either the web address http://netis.cc, or by IP of your personal account, which is standard by default (do not confuse it with the address 192.168.L.L - you need to write numbers at the end, not the letters “l”).

If everything was done correctly before, the page will open quick setup– no additional authorization in the admin panel is required at the initial stage.

How to configure a Netis router through your personal account 192.168.1.1?

Also, the first thing that will be useful is to be able to use the login and password for the web interface that are set by default from the factory. Perhaps someone has already tried to connect a router before you and set their own parameters.

Connecting the Netis router to the Internet

All basic Netis settings are located immediately on home page. First of all, this is the configuration of the Internet and wireless networks. To connect the router to the Internet, you need to select one of the types:

Dynamic IP
Static IP
PPPoE
Other

Which one you have, you need to look at the contract for the provision of services with the provider - depending on this, you will need to enter certain data for connection. You also need to find them out from your operator.

You can also activate here. This is done if the provider binds a specific connected computer to your contract. In this situation, to change it, you need to call technical support. To avoid this, check the “MAC Clone” box and it will automatically be copied from the main computer.

Setting up a Netis wifi network

The next block is wifi settings on the Netis router. The model I presented supports two frequency ranges, so here you can set data for two networks at once. Namely

SSID()
Security (must be checked ON)
Password

Initially, the two networks will work simultaneously, but later they can be activated separately in advanced settings. Netis settings.

After entering all the parameters, click on the “Save” button, after which two new ones will appear in the field of view of all devices with a wireless module wifi networks.

How to change the default password and set your own on the Netis router?

Now let's see how to change the password on the wifi router, which was the default for connecting to your wireless network. Go to the administrator section (how to do this is described) and click on the “Advanced” button

If your router is dual-band, that is, it distributes the Internet at 2.4 and 5 GHz frequencies simultaneously, you need to understand the password for which specific band you want to change. The settings for each of them are located in different subsections of the same name. I will show the example of the most used of them - I open the heading “2.4 GHz Wireless Mode”, section “ Wi-Fi Settings”.

Here, in the “Access point security parameters” block, look for the “Password” item - this is where you can register a new key for connection.

To apply the change, click the “Save” button and wait for the router to reboot.