Cleaning the disk from unnecessary files. How to clean Local Disk C from “garbage” effectively! Expanding your computer's memory

Computers are devices of fine technical and software organization. One of the conditions for their functioning at 100% of their existing potential is, naturally, cleanliness and order both inside and outside. system unit, and directly in sections hard drive. If you do not systematically clean your PC from dust, dirt and “digital debris,” sooner or later trouble will happen to it. It will begin to “slow down” and “glitch” or fail altogether - it will stop starting.

This article will help you clean up the C drive from unnecessary files manually and through special programs.

How to remove unnecessary files manually?

Empty the trash!

In Windows, all previously deleted folders and files are stored in a special directory called “Trash”. It performs the same functions as a trash can in a house or apartment - all the trash is thrown into it. You can restore data that you deleted from this software reservoir at any time.

However, if the “Trash” only stores everything unnecessary, it must be emptied. Because recycled “digital trash” continues to occupy system partition space. Why waste it? Still, it’s better to spend free megabytes (or even gigabytes!) on useful program or a game. Agree.

To empty the Trash, do the following:

1. Right-click on the “Recycle Bins” shortcut on your desktop.

2. From the contextual set of options, select “Empty Trash.”

"Cleaning" in Windows directories

During operation of the operating system, so-called temporary files accumulate in its folders. After one-time using Windows or some other program turns them into “ballast”.

To get rid of them:
1. Press the key combination - “Win” and “E”.

2. Right-click on the “Disk C” icon.

3. In the system menu, click “Properties”.

4. In the new window, on the General tab, click Disk Cleanup.

5. Wait a moment. The system utility needs to analyze the directories before deleting files from the disk.

6. Check the boxes next to the items that need to be deleted (“Magazine”, “Sketches”, etc.).

7. Click the “Clear...” button.

Upon completion of the procedure, you can also remove the saved OS restore points and thereby further increase the free space of the system partition. This is done like this:

1. In the same window, go to the “Advanced” tab.

2. In the “System Restore…” block, click “Clean”.

3. Confirm deleting backup points: in the request message, click “Delete”.

Attention! After running the command Windows utility deletes all existing restore points except the last one.

What's going on in the Temp folder?

The Temp folder also serves as storage for temporary files. Many programs and directly the operating system during various operations (unpacking archives, updating, installation, etc.).

You definitely need to visit Temp regularly and clean out all its contents. It can store not only temporary files, but also viruses. A huge number of digital “strains” are placed here after a successful attack on a PC.

To clear Temp:
1. Open the folder. It is located in the directory:

Drive C → Users → → AppData → Local

2. Press the combination “Ctrl+A” to select all files and folders.

3. Click the right mouse button. Select "Delete".

Have you been on the Internet? Clean up your browser!

After visiting sites, enough information is stored in the cache (special storage) and browser log. a large number of information, including confidential information. Naturally, it also reduces the precious free megabytes of the C drive.

Therefore, make it a rule to clean your browser after finishing web surfing (working on the Internet). This procedure will not take much of your time - only 1-2 minutes, no more!

1. In almost all popular browsers (Opera, Google Chrome, Firefox) cleaning is launched by the hot key combination - “Ctrl + Shift + Del”. Click them simultaneously while in a web browser window.

2. In the settings of the panel that opens, specify that you need to delete the data that was saved for the entire period of using the browser. Also check the boxes next to the objects that need cleaning.

3. Click the "Clear history" button.

Get rid of unnecessary applications

Some users, especially beginners, experience “Plyushkin’s disease” during the process of selecting and installing programs and games.

Whatever they come across on torrent trackers, websites dedicated to software, and other Internet sources, as well as on disks and flash drives borrowed from friends and acquaintances, they are sure to install on their PC. And at the same time they are guided by the same thought as the well-known literary hero: “I’ll take it, keep it, it’ll come in handy someday.” As a result of this approach, computer clutter occurs almost exponentially.

To neutralize an unnecessary game or utility from Windows, follow this guide:

1. Click Start (the first icon on the left at the bottom of the display).

2. In the pop-up panel, click “Control Panel”.

3. In the “Programs” section, click “Uninstall...”.

4. Left-click once in the list on the program you want to get rid of.

5. Click at the top (above the list) the “Delete” option.

6. Follow the prompts of the uninstaller that opens to neutralize the software from the computer disk.

Advice! You can also open the uninstaller in another way: Start → All Programs → folder of the application to be removed → Uninstall file, or Uninstaller (or in Russian - Delete, Uninstall).

How to remove applications installed with the system?

Browser Internet Explorer, Notepad application, games (Klondike, Solitaire, etc.) and others integrated into Windows applications uninstall using the method described above, as well as using special utilities it is forbidden. They can only be disabled - make sure that they are not displayed in the operating system.

1. Open: Start → Control Panel → Programs → Programs and Features.

2. In the window that opens, in the list on the left, click the last item - “Turn on and off components...”.

3. Uncheck the box next to the component that you want to remove (for example, Games → Mahjong).

4. Click OK. Wait until the operation completes.

Automatic removal of unnecessary files

Cleaner programs

This category of software is designed to help you clean up your system partition in a matter of minutes. Using special algorithms, these utilities delicately remove all existing “software obscenities” from the registry, OS directories, browsers and other applications.

Let's look at the most effective solutions.

Accurately detects and neutralizes temporary, unnecessary folders and files from drive C (Temp folder, thumbnail cache, memory dumps, system log). Correctly cleans browser directories (cache, cookies, browsing history, saved passwords and logins) and other trusted applications (WinRAR, Nero, Google panel, etc.). Brings order to the registry: checks its integrity, eliminates errors in “branches”.

One of the most powerful utilities for optimizing the OS and cleaning drive C. Cleans efficiently system folders and fixes problems in the registry. Provides the user with the ability to comfortably manage startup, scheduled tasks and uninstall useless applications. Has special settings for selective cleaning.

The most convenient tool for global and selective cleaning of the system disk. Uses more than 90 algorithms for removing unnecessary objects. Highly optimizes the registry, startup, General settings OS. Able to perform detailed monitoring of consumed system resources in real time. Very easy to operate.

To use nCleaner:
1. In the utility window, click the “Clean System” section.

2. To clean the directories on drive C, in the “Clean system...” block, click the “Clean Now” button.

To fix errors in the registry, click the same button, but in the “Registry clean...” block.

3. Upon completion of the analysis of the selected objects, click “Remove”.

What to do with unnecessary drivers?

Of course, delete it. If a device is no longer on the PC, for example, a video card, hard drive, webcam, then, accordingly, its driver is not needed.

To solve this problem, it is best to use specialized utilities. For example, Driver Sweeper. This tiny program is indispensable when you need to find out which drivers are installed in the OS and remove unnecessary ones. It has additional useful features(registry cleaning, backup and etc.). Equipped with a multilingual interface.

Uninstaller programs

These maintenance utilities uninstall programs and games in a semi-automatic mode. They find and run the uninstaller of the specified application, and then, upon completion of the standard uninstallation, free the system partition from the remaining elements remote application.

Let's look at the most popular uninstaller utilities on the Internet.

A worthy alternative to the system applet responsible for uninstalling software. Endowed with advanced functions, carefully analyzes directories. Finds all program remnants in folders and the registry. Equipped with an easy to use control panel.

It analyzes the disk and cleans it from “digital garbage” at lightning speed. Neutralizes objects from folders and the registry without interfering with the performance of the system and programs.

Solution from Chinese developers. Endowed with powerful algorithms for scanning system objects. Has the Force Scan function.

How to delete undeletable files?

If you have not yet encountered a situation where an unnecessary file “does not want” to be deleted, you will definitely encounter it in the future. This occurs because the object being deleted is being used by an application or driver.

Such problems are also resolved with the help of special utilities. Here are some of them:

Has a tiny size. Integrates into context menu OS. Tells the user which specific process is blocking the application. Correctly removes files in directories. Operates with just a few mouse clicks.

Can remove a large number of file locks related to user rights, access and security. Instantly terminates all blocking processes and safely sends the selected item to the trash.

It is protected from inappropriate use: it does not delete files without which the system cannot work and in which confidential user data is stored. Effectively removes locks and deletes files of almost all categories.

Beware, memory eaters!

Windows, by default, reserves system partition memory for its special files. They can have a fairly substantial volume - 4.7, 10 GB or more. But if there is no need for these files, or rather for the functions that they support, of course, it makes sense to remove them. Who wouldn't mind another 5-10 free gigabytes on drive C?

Pagefile.sys

The swap file is a kind of software reservoir for PC RAM. It temporarily stores data that the RAM cannot accommodate. But if you powerful computer with RAM of about 6-8 GB, then this file can be removed by disabling the special option.

1. Go to: Panel → Control Panel → System and Security → System.

2. Click " Extra options... " In the properties panel, click "Options" in the "Performance" block.

3. Go to the “Advanced” subsection.

4. In the block " Virtual memory» click "Edit".

5. Uncheck the “Automatically select...” option.

6. Click the radio button “No paging file”, click “OK”.

Advice! To reduce the size of pagefile.sys., click “Specify size” and enter the file size in megabytes in the “Initial ...” and “Minimum ...” fields.

Hiberfil.sys

This file stores data when the PC enters a special “Sleep mode” - hibernation. If you do not use this option, do the following:

1. Open Start. In the search bar, type - CMD.

2. Run the application that appears in the panel with administrator rights.

3. Enter the directive - powercfg.exe /hibernate off

4. Press "Enter".

You can also disable hibernation through the “Run” panel (launched by the “Win + R” combination). Type in its line - powercfg –h off and click “OK”.

Successful Windows cleaning!

The system area has the unpleasant feature of filling up without notifying the computer owner. Therefore, sooner or later, many users wonder how to clean drive C from unnecessary windows files 7 manually.

Usually there is no problem with wiping other partitions special problems– the PC owner simply deletes unnecessary information. With “S” the situation is different. The system fills up not only from the load, but also from third-party garbage that remains from the OS.

It accumulates, taking up more and more free space, which negatively affects the performance and functionality of the PC.

There is a “Temp” folder in the operating system. It contains all the temporary files on the computer. Those that are downloaded during updates, application installations, or necessary for the temporary operation of any program.

Over time, a huge amount of garbage accumulates in this folder. They cannot be called differently, since these files have no practical use, they only take up space in the system.

You need to periodically clean your computer of everything unnecessary. There are two cleaning methods. Using special applications and manually. Moreover, the second method is much more effective.

How to clean Windows 7 from unnecessary files manually

Windows Seven has a built-in special program that can be called up using the Disk Properties window.

Another launch method is to press the Win+R key combination and then type the command “ cleanmgr ».

Next, you need to click OK and select the target partition (In this case, C). As a result of scanning, a window will appear on the monitor where the amount of memory being freed is displayed and you must select the objects to be deleted.

Typically, a large amount of memory is occupied by simple updates and browser information. Then you need to click OK to remove the garbage.

Some updates are stored in a separate element – “”. If it is not cleaned, it can become filled with significant weight.

Under no circumstances should you delete anything from this directory yourself. Another important point is that in order to properly clean this folder using the Windows Assistant, a certain update (KB2852386) must be installed on the computer, which increases the assessment level of the parts being cleaned.

The Advanced Cleanup Tools window begins removing unused utilities and system backups. Then you need to click “Clean up” in the “programs and features” menu, go to the installed section (to display only the most voluminous, you can click on the black triangle in the “Size” item).

If you find unfamiliar items, you need to figure out whether they are important before removing them. Many people delete all utilities that they haven't used for several months.

Delete unnecessary Windows 7 files manually

The first thing you need to check is the Desktop, which also belongs to C. Many people save photos, books, etc. there. This is done to make it easier to find the desired shortcut. However, it is not recommended to save bulky items on your desktop.

Only shortcuts and frequently used objects should be there. The excess should be transferred to section D. With the correct layout, the weight of the desktop will be minimal.

Then check the system partitions C (My Documents, Images, etc.). Even if the owner does not personally save data in these directories, they can be filled in by other utilities that, by standard, save information in these folders.

They take up space, especially if you use video frequently, graphic editor or play computer games. It is better to carefully study the contents of these sections and delete some of the data.

Another way to free up space is to move the contents to D. However, using the standard “Copy-Paste” operation may not work. The output is a change in the location of individual elements in the properties.

Free up space using third-party programs

There are many special applications for removing garbage from C. The most common free representatives:

CCleaner;
WinDirStat;
Auslogics BootSpeed.

In addition, you should free C from unnecessary Internet files. This can be done with the help of additional assistants and using a browser. It provides a function for deleting cookies, browsing history and cache. When information accumulates, section C is filled out.

For Opera users, it is important to clear temporary browser data. They can be located in several places: Temp, App data.

According to the standard, they are set to “hidden” status. This indicates that when navigating to a location, the user will not be able to find it. You can remove the status in “Folder Options”

In Windows, temporary Opera saves are located at: ...\Roaming\Opera or ...\Local\Opera.

Clearing files

Items with a special extension are called unnecessary:

.tmp;
.bak;
.temp;
.old etc.

They remain after changing documents and settings. These extensions can be located in the program itself or in the place where the change itself is located. It can be very difficult to find all this garbage. You can use Revo Uninstaller for this purpose.

Additional Methods

If nothing helps and you are still interested in the question of how to clean the disk from unnecessary files in Windows 7 manually, then disable hibernation mode in Windows Seven (if it is not in use), and then delete hiberfill.sys.

It has a volume comparable to the built-in RAM(the more RAM installed, the more massive). The way out of this situation is to reassign disk sizes. By increasing the size of directory C, you can solve the problem for a while.

It doesn’t matter what capacity HDD your computer. Sooner or later, you will inevitably encounter the age-old problem of users of all times - “There is not enough space for...”. If you replace the ellipsis in quotation marks with the letter of the system partition, it is not difficult to guess what the carefully carried out cleaning process with the “golden pens” of a beginner will lead to. Total deletion of “extra” files will cause irreversible crash of the OS. But if the user who overestimated his abilities knew the correct answer to the question “how to clean the C drive,” errors could have been avoided.

Dangerous mix effective ways and the shock wave force of the applied recommendations will throw digital waste beyond the disk space. Especially for you, dear reader, seven effective methods cleaning the system disk. Scroll, ladies and gentlemen!

Operational digital waste disposal service

In order to resolve the difficulty “How to clean disk “C”?”, use the standard Windows tool “Disk Cleanup”:

Go to the Start menu.
Go to the "My Computer" section.
Point the marker at the "C" drive.
Right-click to open the context menu, from which select “Properties”.
In the service window that opens (by default on the “General” tab) activate the “Disk Cleanup” button.
After a certain time (depending on the size of the system partition), a list of files that can be deleted will appear on the screen.

As a rule, not all items in the table are activated. Check the boxes where you see fit and click on the “OK” button. Next, confirm your actions - “Delete files”.

The next item in the ongoing project “How to clean the C drive” will be the “Advanced” tab (a window with a list of files presented for deletion).
Run the cleanup script one at a time: first "Programs and Features", then "System Restore and Shadow Copies".

After removal unnecessary programs and “checkpoints” you will obviously have more space on your hard drive.

Where are temporary files and other disk space wasters hidden?

When browsing the web and installing software, the operating system methodically stores various types of data. In order not to bother yourself with searching for hidden folders and manually clearing full cache directories, install specialized CCleaner software on your computer:

In the main window running program activate the “Cleaning” section.
Click the "Analyze" button.
After waiting for some time, remove the digital junk detected by the software.

The question of how to clean drive “C” is almost resolved. Still, if you still don’t have enough free space, follow the recommendations below.

Putting things in order in the registry

All your actions related to changing operating parameters of the OS, as well as those entered into the settings installed programs various editions are recorded in system base data. Which ultimately leads to the accumulation of corresponding entries in the registry log. By the way, OS slowdown that is often observed by newbies is the “clogged” state of the mentioned database. If the user does not know how to clean the local drive “C”, then he probably has no idea that the “system change log” also requires systematic maintenance.

A completely harmonious reference to the previously discussed software

It is a cumbersome and extremely time-consuming task to manually clean the registry. And, in general, it’s a dangerous occupation! So let's look at how CCleaner can help you.

In the main program window, open the “Registry” section.
Click on the "Search for problems" button.
Then activate "Fix...".

You'll be surprised how much faster your computer will run!

How to clean drive “C”: gigabyte reserves

Pursuing the goal of “more space in the system partition”, it is worth paying attention to one important point:

During the installation process, the OS reserves part of the disk space for the paging file.
The final size of "virtual memory" depends on Windows versions and volume installed on the computer physical memory- RAM.

The “Pagefile.sys” file can be moved to another partition of the hard drive. One way or another, the difficulty caused by the question: “Disk “C” is clogged - how to clean it?” will be resolved in a positive way:

Go to the Start menu.
Right-click on the “This PC” section.
Through the “Properties” item in the drop-down list, go to the “System” section.
Activate the “Advanced settings...” link (left side of the service window).
In the “System Properties” window, click on the “Options” button (in the first block).
Next, go to the “Advanced” tab.
Activate the "Change" button.
Uncheck the box “Automatically select...”.
In the checkbox with the displayed list of partitions, select the “C” drive and check the “Without paging file” option, then “Set”.
Select a new directory.
Check the box "By system selection".
Click on the “Set” - “OK” button.
Agree to the service request “Change”.

After the reboot, the swap file will be located in the hard drive directory you specified.

Supporting Software: Disk Space Analysis

The practical solution to the question “how to clean local drive “C”” can be significantly simplified. Unfortunately, the standard Windows Explorer is, to put it mildly, uncomfortable in terms of visual control. Hidden files and folders are not displayed, and their “visibility” requires additional actions on the part of the user. Therefore, it makes sense to use the incredibly convenient WinDirStat utility. Each file type is displayed in a specific color. The application allows you to accurately determine the value and size of any program element. Even a beginner can easily find folders with user data and “lost” files. Without contacting third party applications, directly from the utility window, you can permanently delete it.

Natural ending

When you know how to properly clean drive “C”, there will be no problems working with your computer. Systematic maintenance of the storage drive (HDD) will help prevent problems associated with “overloading” the system, as well as any other partition of the hard drive. Never delete a file unless you understand its purpose. Remember: the stability of your system depends primarily on your attention and prudence. So be reasonable. And all the best to you!

The normal operation of your laptop is influenced by many factors, including the availability of free space on HDD disk your computer.

It so happened that when using a computer with OS installed Windows any version, a lot of “garbage” is generated. Such garbage is considered to be: temporary files and folders, registry entries, and much more. For confident work Windows systems A free space reserve of about 10-20 gigabytes is required. After all, it is impossible to install either a program or a game on a completely full hard drive.

What should you do if your laptop suddenly starts lagging and freezing, programs run slowly and often incorrectly, and photos, videos and music no longer want to be downloaded?

Clean and clean the hard drive of your laptop again!

In this publication we will tell you how, without resorting to outside help, you can carry out Windows tools or using third-party programs and utilities.

On the keyboard, simultaneously press the “R + Win” keys (Windows logo key).
In the "Open" field, enter the command "cleanmgr". This is the command to allow calling system utility to clean the disk.
Click " OK "to confirm your action.
From the list that opens, select the disk with which we will work (I advise you to start cleaning from the system disk).
We wait while the system analyzes the disk directory.
Next to the files you want to delete, check the boxes and click “OK”.

Attention! Enabling the “Delete” item Windows update» Allow you to delete a system file, which will save you from old system updates.
Also in the “Advanced” tab, you can configure additional settings for freeing up space on your laptop.
Removing unnecessary components and programs. In the window that opens, select unused programs and, following the instructions on the screen, delete them without a twinge of conscience.
Recovery files take up a lot of memory, so don't be afraid to delete all system restore checkpoints except the last one.

Cleaning temporary files and folders. Folder "Temp"

The “Temp” directory is a repository for all kinds of garbage (temporary folders and files), so feel free to delete all the contents of this folder.

Open the Run window as shown at the beginning of the post.
In the window that opens, write “%temp%” and press “Enter”.
In the active window, press "Alt".
Open the “Tools” tab, click on “Folder Options”.
In the “View” tab, check the box next to “Show hidden folders, files and disks."
Don't forget to click the "Apply" and "OK" buttons. Now all the files and folders that were previously hidden from you are visible on your disk.
We select all files using the key combinations “Ctrl + A” and by clicking the right mouse button or touchpad we use the “Delete” function.
After deleting files, do not forget to empty the trash. To do this, right-click on the “Trash” icon and select the “Empty” action.

Cleaning "bulky"system files

Important! Before starting work, make sure that you do not need these files, but only take up useful space. For advanced users.

Pagefile.sys (RAM swap file)

In the taskbar, click the "Windows" button.
Select “Control Panel”.
In the “System and Security” section, find the “System” subsection.
Select the “Advanced system settings” section.

Then open the “Advanced” tab. Go to the “Virtual Memory” section and click the “Change” button.
Change the checkbox to “No paging file”. After making changes, confirm your actions by successively pressing the “OK” buttons.

Cleaning "Hiberfil.sys"

This system file stores all information about the system setup from the moment of its activation, this file can reach up to 5-10 gigabytes of dedicated ROM memory.

To remove it from the system partition, use the following steps:

CleaningHDDusing programs and utilities

There are many programs designed for automatic check and cleaning your system of “garbage”. They usually scan your Windows and perform cleaning in offline mode. In this section, we will look at all the advantages and disadvantages of using programs to uninstall and free up free space on your laptop’s hard drive.

Among those available for free download in this moment The following programs and utilities are available:

CCleaner;
Reg Organizer;
Soft Organizer;
Revo Uninstaller.

CCleaner

One of the most accessible to download and easy to use is currently CCleaner program from English developers Piriform LTD. It allows you not only to delete necessary files from your laptop, but also correct errors in the registry and uninstall even uninstallable programs. In the cleaning sections you can select what you want to clear - cache, cookies, etc. Two versions of the program are available: “Free” and “PRO” (paid). Both versions have proven themselves very well and work perfectly in both active and background modes. Russian and other versions available. The paid version has advanced features.

To run the program:

Reg Organizer

Another cleaner for your hard drive from ChemTable. A paid and free 30-day trial version is available.

IN paid version thin available Windows settings, as well as other utilities and add-ons.

Soft Organizer

A universal utility from the developer ChemTable Software. Has English and Russian interfaces. Tracks all changes during installation and use of applications during Windows operation deletes them.

To work you need:

This software also helps to analyze the resource and disks.

Revo Uninstaller

One of the simplest and most advanced software products from VS Revo Group

Accessible and intuitive interface. Support service and advice for novice users.

Comparison of “cleaner” programs.

Options/Program names	VS Revo Group	Soft Organizer	Reg Organizer	CCleaner
Simplicity
Availability
Depth
Convenience
Free version

Note! Let your computer have only the files and programs you need! Closely monitor the condition of your computer and regularly check it for debris.

Video - How to clean the hard drive on a laptop

Over time, a large number of unnecessary files accumulate on the main partition of the hard drive, which is called the letter C by default, taking up a lot of space. Since the disk allocated for the system and system elements most often has a small volume, the presence of temporary and remaining remote programs files, can lead to the fact that free disk space becomes catastrophically low. Manually deleting files from this drive is very difficult because they may be located very deep in the folder system, and it is also dangerous because you can accidentally erase items that are necessary for the computer to function correctly. To clean safely system disk In Windows 10, your best bet is to use the built-in Disk Cleanup program.

Windows 10 Disk Cleanup: Built-in Tools

There are several ways to open the Disk Cleanup program in Windows 10. Remember that you should only use it if drive C is full, and you can clean it by deleting third party programs, there is no possibility.

Through command execution

Via control panel

How to use the program

In the “Disk Cleanup” block, you need to check all the departments that you want to clean.
Having selected a department, you can read all the information about what it contains, as well as view the files that belong to this section by clicking the “View files” button.
To proceed to removing system files, click the "Clean" button system files" You will need administrator rights to access this feature. But it is better not to remove any elements of the system, as this may lead to system breakdown or incorrect operation.
In the “Advanced” tab, you can proceed to remove unnecessary programs by clicking the “Clean” button in the “Programs and Features” block.
In the “System Restore and Shadow Copies” block, you can click the “Clean” button to proceed to deleting unnecessary recovery points that also take up space on drive C. It is not recommended to delete all points, and it is also better to save one or two of the last ones in order to always have the ability to roll back the system if some error occurs that cannot be corrected by other methods.
Once you have selected which partitions you want to clean and have ticked them, click the OK button to begin the process. Do not interrupt the cleaning process or turn off the computer so that no errors occur and all files are deleted correctly.

Advanced Cleaning

Each user with administrative rights has the ability to run Disk Cleanup from big amount points than is available during normal startup.

What to do if the application does not start

The program may not open using any of the above methods only because the file responsible for launching the application is not in the default path. Try to find this file manually, it may be located in the following path: C:\WINDOWS\ServicePackFiles\i386. If it is not there either, or the folder itself does not exist, then there is only one thing left to do - use third-party programs to clean up the disk.

How to clean up drive C on Windows 10 using third-party programs and applications

There are many programs that allow you to clean your hard drive from unnecessary and temporary files. Many of them are distributed on the Internet for free and are in no way inferior to the built-in Disk Cleanup program. Next, we will consider the most popular, convenient and easy-to-use applications.

CCleaner

The positive aspects of this program include the following qualities:

Kaspersky Cleaner

A program from a well-known campaign that previously specialized only in antiviruses, but has now started producing applications with other tasks. You can download Cleaner from Kaspersky from the official website by finding it in the general list of all programs -

The main advantage of the application is its simple design, which allows you to complete all the necessary tasks by pressing one “Start scanning” button.

Also, if you don’t like the changes made by the program after the last session, you can cancel them by clicking the “Cancel Changes” button in the main menu.

What can cause your hard drive to fill up?

If you have cleaned up your disk using one of the above methods, but have not freed up enough space, try the following:

Manually go through all the files stored on the drive and see which ones can be moved to another drive or deleted. Do not touch system files and programs; you can only move and edit elements that you personally added.
Remove unnecessary third-party programs that are definitely not useful to you.
Check your computer for viruses. Perhaps the virus itself takes up some of the free space or regularly downloads advertising files and applications that clog up the disk.

It is recommended that you clean out the C drive regularly, as how busy it is will determine how quickly the computer can find the files you need and present them to the user. That is, if drive C is overloaded, the system runs slower. And also, all browsers and other programs send temporary files and cache to the main disk by default, and if there is no space on it, then there will be nowhere to store the necessary elements. Based on all the problems described, we can conclude that it is worth cleaning the disk using special programs at least once a month.