Means do turn off target. Do Not Turn Off Target in Samsung (translation and what to do). Troubleshooting Methods

In the “Knowledge Base” section we look at the most common problems that may arise during the operation of Android-based devices. Today we will look at the solution to the problem with the Downloading error. Do Not Turn Off Target - how to remove the inscription. It should be noted that this is mainly the focus of Samsung tablets and phones. However, this kind of difficulty may also affect other models of mobile devices.

So, first you need to figure out what exactly could have caused the device to lock, as a result of which such an inscription appears on the screen, and then any possibility of manipulating the device disappears.

The first reason is not a breakdown, the system simply formats the partitions automatically or installs some software. In this case, in order not to turn your device into a “brick,” you should under no circumstances interrupt the operation, which is what this message says: “Loading. Don't interrupt the operation."

The second reason - system error, characteristic of certain models of Android mobile devices.

The third reason may be the state of the USB connector, when for some reason (for example, oxidation) a resistance has been created in the micro-USB socket, characteristic of a USB-Jig, with the help of which the smartphone is entered into the firmware mode (or Download Mode), as a result why the device can enter this mode without visible participation of the owner.

Troubleshooting Methods.

To avoid interrupting the normal operation of the system (as we discussed above), before proceeding with active actions, you need to wait from five to thirty minutes (the waiting time depends on the amount of information in your device). If the problem persists, we suggest using one of the methods discussed below.

First way. To begin with (if the devil is not as scary as he is painted), you can try simple steps - turn off the device, remove the battery, after a five-minute wait, insert the battery and start the smartphone again. Did not help? Then let's move on.

Second way. The point of our actions will be to go to recovery (recovery mode), and then forcefully turn off the Downloading mode. The step-by-step process will look like this:

We take out the flash drive and SIM card, turn off the gadget, take out the battery for a few seconds and put it back, press and hold the volume button towards UP, continue to hold it, press the power button. Hold until the device starts booting, after which you release the power key and continue to hold the volume rocker

As a result of these manipulations, the device should boot into factory settings mode, after which:

Activate the VOLUME UP position.
Then the RECOVERY item.
Then wipe data/factory reset.
Let’s wait a little and select “reboot system now”.

We will make the selection with the power button (on/off), and move through the items using the volume button.

For some devices, the algorithm of actions may be slightly different:

Turn off the phone.
Removing and returning the battery.
Simultaneously pressing the power/lock button and “home” (square button at the bottom of the screen)

After which we must directly . Don’t forget that our goal is to get into recovery, so you can always find out how this can be done specifically on your smartphone model. Further:

Select wipe data/factory reset, confirm by pressing “home” (if that doesn’t work, turn on/lock) - “yes”, confirm, the process of restoring all phone settings to factory settings begins.
Upon completion, you automatically return to the main recovery menu, select reboot system now, the phone will reboot and turn on without a password.

Third way. This option is used in the case described above (third reason). That is, if all attempts do not help, then you need to diagnose the USB connector and, if necessary, replace it. Flashing, resetting settings to factory settings, and other dances with a tambourine will definitely not help. Of course, the replacement will have to be done at a service center, but for those who are good with their hands, we offer the following video. There are no Russian subtitles, but everything is clear and accessible:

Well, that's all we wanted to tell you about this topic. Since there is no single method for all devices, there will certainly be questions, so please contact us and we’ll try to figure it out in each specific case. Good luck!

Some owners of Samsung phones may encounter a situation where their phone refuses to boot when rebooted, and the message “Downloading... Do not turn off target” appears on the screen. Pressing various keys does nothing, the phone does not react in any way, and the user has no idea what to do. In this article I will try to shed light on this problem, I’ll tell you why this message appears, and I’ll also explain how to get rid of Do Not Turn Off Target Samsung on your mobile device.

Translation of the inscription and reasons for its appearance

The screen I mentioned above with the inscription “Downloading... Do not turn off target” in “Downloading... Do not turn off target”, which in translation sounds like “Downloading... Do not turn off the target device” is the downloading mode that is used to implement firmware (installation of the OS and its elements) of mobile devices from Samsung. The tool used for this purpose is special program called “Odin”, designed exclusively for flashing mobile devices from this South Korean brand.

Typically, to enter this mode, you need to hold down the power button and the volume down key, and then, after entering technical mode, also press the volume up key. So you get into “downloading mode” (“odin mode”), the inscription I quoted is displayed on the device, and the device itself enters a state of readiness for firmware and connection to a PC.

Because the regular user does not know what to do in this situation, the device will remain in the Do not turn off target state until its battery runs out. After the device turns off and the user charges it again, the device will again operate in normal mode.

Besides the reason " crazy hands" accidentally launched "odin mode" on the device, there are a number of other determinants that can enter your samsung smartphone to the specified mode:

How to fix Do Not Turn Off Target error

If your phone accidentally enters Do Not Turn Off Target mode, there is no need to wait for hours until its battery runs out. Just hold down the power button without pressing it for a while (from 10 to 30 seconds), and your phone will reboot in normal mode.

Also, a good alternative would be to simply remove the battery from your device (if it is removable); some experts also recommend removing the SIM card along with the battery. Wait a few minutes and then put the battery and card back.

Usually, these actions are enough to restore normal operation of the device. If these techniques are ineffective with the Do Not Turn Off Target mode, then we are dealing with a serious dysfunction of the device, and you need to do the following:

Try resetting your phone to factory settings. I immediately warn you about the loss of user data on the device after performing this action, but if a regular reboot of the device does not help, then you can try this tool. Hold down the device's Power and Volume Up keys, wait until the image appears on the screen, and then release the keys. You will be in recovery mode, where you need to select the wipe data/factory reset option and wait for the process to complete;
If resetting the data to factory settings did not help, then you should think about flashing your device. Please note that this action should be carried out by a professional, and it is advisable to use official firmware from the developer;
It is also worth contacting service center with a description of the problem. Perhaps your device is damaged at the physical level, and various software manipulations will simply be ineffective.

Visually, how to remove the Do Not Turn Off Target inscription can be seen in the video.

In most cases, to fix the Do Not Turn Off Target problem in Samsung, you just need to hold down the device's power key for a few seconds. If this technique does not work, then we are dealing with a serious software and hardware problem, the solution to which can be either resetting the phone to factory settings or sending the device to a service center for repair.

Hardware and software failures of the phone can lead to the device completely stopping turning on or causing an endless reboot. This also applies to smartphones from Samsung. If hardware problems can only be fixed in the service, then many software problems you can decide on your own. In today’s material we will talk about what to do if your Samsung phone does not boot and displays “Downloading... Do not turn off target”. This inscription indicates that the smartphone has entered Odin Mode, which is used to work with the device via a computer. With it, you can install firmware, reset the device, and so on.

So, if the problem is not related to the hardware, then you should first try to turn off Samsung using a combination of buttons. Since there are no buttons or menus on the screen, you need to simultaneously hold down the Power, Home and Volume Down buttons. Hold them for a few seconds until the screen goes dark. Then you can turn on the device using the usual method - using the power key.

On some phone models Samsung ways are different. For example, on devices without a key under the screen, only the volume and power buttons are used. You can check the instructions or guide on the official website to find out the exact method for your phone.

An alternative option is a standard reboot, which is performed by long pressing the power button. If Samsung randomly entered Odin Mode, then press and hold the power button until the inscription disappears. After this, the phone will turn off completely, and you can start it in working order using the usual method. Press and hold the power key for a couple of seconds until the logo appears on the screen.

The described methods should only be used if the device is not connected to a computer to perform the procedures. If you are currently installing the firmware, a forced reboot will lead to failures in the OS!

If the previous methods did not lead to a positive result, you need to reset the device cache. This procedure will help fix the error if it is due to crashes or incorrect firmware updates.

First, turn off the device using one of the previous methods. Then hold down the Volume Down and Power buttons at the same time. The second option is the Home button and the Power button. Wait for the phone to load the Recovery menu. Control here is carried out by buttons for changing the volume level. Scroll to the Wipe cache partition item and activate the procedure with the power key.

Now all that remains is to wait for the cleaning to complete. When the procedure is completed, activate Reboot system now. The phone will reboot into standard operating mode.

Reset to factory settings

If resetting the cache does not solve the problem, you will have to roll back to factory settings. This operation will not affect your work with the phone in the future if all important information and files are saved in cloud storage or backup copy profile. Reset Samsung devices performed through the Recovery menu. Start the phone again in this mode, as described in previous method. Only now you need to select Wipe data/factory reset and activate the process with the power button.

Video instruction

The presented video instructions explain in as much detail as possible the procedure for forced reboot and reset of Samsung devices.

Conclusion

If you followed the instructions, but none of the methods helped, you need to contact a repair center for diagnostics. Stuck on the screen with the word Downloading can be caused by a faulty firmware, internal storage, or a number of other reasons.

Sometimes users manage to load smartphone modes that can only be turned on if they really want to. Sometimes they ask the following: the message “Downloading... Do not turn off target!” appeared on the screen, what should I do? The main thing is not to worry, nothing bad happened.

This inscription indicates that the smartphone is in Download mode or Odin Mode, as it is also called. In this mode, you can reflash your smartphone or, say, install a recovery menu. For firmware, use the Samsung Odin utility for a PC or laptop.

Interestingly, before loading the Download mode, the user must press the Volume Down, Home and Power keys simultaneously when the smartphone is turned off. After this, a warning will appear, where pressing the volume down will boot the device in normal mode, increasing the volume will launch the Download mode.

Early version of the mode:

Later:

There is nothing to be afraid of here: if you are not planning to reflash the device or install the same recovery menu, just reboot your smartphone. And then the question arises - how to do this? After all, there is no separate menu item for rebooting, there are no virtual buttons at all. So what to do?

The same key combination works here as when you turn it on. this mode: Volume down + Home + Power.

Press these keys simultaneously and wait for the screen to go dark. As soon as it goes out, remove your fingers from the buttons and wait for the device to load.

And remember that under no circumstances should you reboot your smartphone in this way if you are currently flashing it - this can turn the device into a brick!

Many owners of Samsung and Nexus mobile devices may have noticed that their devices suddenly rebooted, after which the message “Downloading: Do not turn off target” appeared on the screen. The dysfunction in question can be caused by various reasons, from random glitches in the operation of your Android to incorrect presses of button combinations by the user himself. Below we will look at the causes of the problem and options for solving it.

Options for the notification in question

1 What does the message mean and when does it appear on Samsung
2 How to fix Do not turn off target
- 2.1 Exit boot mode
- 2.2 Use a clean reboot
- 2.3 Clear cache partition
- 2.4 Perform a master reset
- 2.5 Contact the service center
3 Conclusion

What does the message mean and when does it appear on Samsung?

The literal translation of the message Do not turn off target is “Loading. Don't turn off the target."

On Samsung phones, the “Downloading” mode (also known as the “Odin” mode) is a specialized device firmware mode designed for rooting tasks and returning the phone to its stock state.

Single mode on Samsung

When the “Downloading” message appears, you should not wait until the device completes some kind of imaginary download. On the contrary, the device expects you to connect it to your PC and install the system files you need.

What are the reasons for the transition mobile device to "Downloading" mode? Usually they are:

Random malfunction of the device;
There are serious problems in the operation of the internal system software of the phone;
The user tried to switch to “Recovery Mode”, but instead of the required combination Power buttons+ Home + Volume up pressed the combination Power + Home + Volume down;
Important system files are damaged and the device is no longer able to boot in standard mode. This may be caused by a violation of the integrity of the internal memory partitions, the lack of necessary data in the EFS folder, incorrect firmware of the gadget, and so on.

After we have found out the reasons for the Do not turn off target error on Samsung, let’s move on to options for solving it.

How to fix Do not turn off target

Let's look at a list of ways to get rid of the Do not turn off target error on Samsung.

Exit boot mode

If you got into Downloading mode by accident (by pressing the wrong buttons), then getting out of it will be quite easy.
Make sure you are in the “Downloading” mode, then simultaneously press the Power + Home + Volume Down button combination.
Do not press them until the screen turns black, then release the indicated buttons.
The smartphone will reboot in standard mode.

Press the following button combinations

Use a clean reboot

Press the power button for 10-20 seconds until your device turns off.
Then remove the cover from it, take out the battery, SIM card and memory card (SD).
Now hold down the power button for at least 20 seconds (without pressing) in order to drain the phone of the remaining electricity as much as possible.
After completing the procedure, reinsert the SIM and SD card, battery, and boot your phone in normal mode.
This may help solve the Do not turn off target problem on Samsung smartphones.

Clear cache partition

If the previous two methods did not help, then the problems of your device may be caused by incorrect operation of its firmware. If your OS was recently updated, or you tried to reflash your device, then the appearance of the “Downloading” message may be caused by these factors.

In this case, clearing the cache partition may help. Do the following:

Perform a master reset

If the above method also does not help, then the remaining solution is to perform a hard reset of your device. Please note that implementing the latter will completely delete your personal data (photos, videos, music, contacts, application data, etc.) from the phone’s memory. Therefore, before taking this step, carefully weigh everything and make the right decision.

If you decide, then boot into recovery mode, as described in the previous method. But instead of the mentioned “wipe cache partition” option, select the “wipe data/factory reset” option, confirm your choice, and then select the “Yes – delete all user data” option. Wait for the process to complete (may take about 15 minutes), then press Power to reboot your device.

Perform a hard reset

Contact the service center

If none of the above helps, take your phone to the nearest certified repair shop. If the phone is under warranty, do not hesitate to use the warranty card and contact the store (center) to exchange or repair the problematic device.

Conclusion

If an error appears: Downloading: Do not turn off target on Samsung phones It is recommended to try to reboot the device in standard mode (the first two methods will help). If you have experienced everything software, and they did not give any results, then you should contact a service center - perhaps the problem is hardware in nature, and your device needs repair.