Why can't MMS messages open on Android? How to make settings to activate the MMS service from Tele2

Despite the many new technologies and gadgets, push-button phones and similar old technologies are of interest and find application in certain areas. Therefore, the question: how to send MMS from phone to phone has not become so outdated.

Some people still find it easier to use the first models of mobile phones, which were designed only for calls, and send photos not over the Internet, but via mms.

Sending MMS from your phone

The mms service is supported by most modern operators, so it is quite possible to exchange small files that contain photos or other data at any time.

But for this you need to have not only a positive balance, but and compliance with some basic parameters:

On your mobile device you should there is a function to support GPRS data transfer.
mms GPRS profile must be configured(usually this happens automatically).
The phone must support multimedia functions.

You can send an mms message in the same way as a regular message; you can select a different format in the message creation section. While viewing photos on your phone, there is the option “Send via mms” - this is the second way to quickly generate a short message with multimedia text.

Send MMS via smartphone

MMS settings happen automatically in most cases, including on Android. When failures occur, they are set manually so that you can freely use such messages, despite the fact that for some subscribers they are completely irrelevant.

You can send a new mms message from a smartphone in three ways with active system adjustments: through the camera, by going to the gallery or messages.

mms settings are located in the “Settings” item of the same name in the “ sim card And mobile networks" If you use several cards, then you need to select separately the one on which you want to send.

In the “Access Points” item, select an access point for MMS, which is called that and is responsible for the correct reception of multimedia messages. All changes are confirmed with the “Save” command.

To save your time, you can request settings from the operator or go to the website with step by step instructions specifically for your version of Android.

How to send and open MMS from Android?

mms opens automatically if everything is configured properly on Android. As soon as another user has sent you such a message, it goes to a regular folder and you can receive it without delay and without the Internet.

Video on the topic:

If the message does not open, there may be several reasons for this:

Card memory full.
MMS reception is not supported.
Network failure.

Instructions for sending mms on iOS

Among the solutions to regular problems, the relevant question is how to send a multimedia message on iOS? This is what owners face new iPhone, the settings of which still need to be sorted out. The instructions for sending are the same as with Android.

Initially, you need to go to the home menu: “Settings” - “General” - “Network” - “ cellular data transmission".

The last paragraph indicates the operator’s individual parameters, which can be obtained automatically or found on official resource. Two columns remain empty: Maximum size and MMS UA Prof Url. Don’t forget to reboot your mobile device after making all the adjustments yourself.

Sending MMS itself takes place in 9 stages:

Reader survey

conclusions

Before you send a multimedia message, you need to make sure that your device is capable of receiving and sending this type of message.

If you can’t figure out the mms parameters on your own, you can use the help of an operator who will clarify the phone model and help you restore operation step by step.

With the correct order of settings, you can successfully send a message with a picture or photo to any subscriber, no matter where he is.

To send videos and music in messages, you need to know how to set up MMS on Android. Automatic settings designed for popular smartphone models are sufficient in most cases. If you can't go online and send files, you may need to enter the information manually.

Some subscribers ask the question of how to set up MMS on Android to the nearest office of their operator. Another option is to call the operator's service number. The downside of this method is the long wait.

When the autoinformer finishes voicing the menu, a link to the line with a consultant will open. After accepting the application, a notification with parameters is sent to the subscriber. You should save them, then you may need to reboot the device. Sometimes activation is requested: you will have to call the consultant again. You can save time by entering the settings yourself.

How does automatic tuning work?

The advantage of automatic MMS settings on Android – subscriber participation is not required here. When registering on the network, after installing the SIM card (and in some cases entering the PIN code), a message with ready-made parameters is sent to the phone. You need to save it, then you can use the Internet and send multimedia messages.

The disadvantage of automatic debugging is that it is only available once - during registration. If the device is successfully connected to the network, there is no need to configure it again.

Operator assistance in connecting MMS

If the automatic setup was not successful, you should contact your network operator for help on how to set up MMS on Android. You can do this for free by calling the service number. The number of requests here is not limited.

Megafon clients can contact a consultant for help by calling 0500. When the operator answers, he needs to clearly explain the situation and say what the difficulties are.

In Megafon communication stores you can configure the settings of your mobile device for free. To find the nearest office, use the *123# “Call” command.

A Tele2 subscriber can order automatic setup. To do this, you need to call service number 679.

Help for Beeline and MTS subscribers

Before setting up MMS on Android manually, you can call the Beeline operator at 0611. The call is not charged. You can also call the federal number 8 800 700 0611.

The MTS operator has short number support services 0890. From phones of third-party operators or from landline devices you need to call the federal number 8 800 250 0890.

Instructions for Motiv and Yota subscribers

For network users the motive is how to set up MMS on Android, the operator will help you by calling the short number 111. From a mobile or landline phone you can call the federal number 8 800 240 0000. But this is not the only service.

You can order automatic setup via #919 “Call”. The disadvantage of this service is that when large quantities requests, sending parameters will have to wait about two hours.

Another option is to send a request via message. Send a text to 0111 indicating the device model, the service that needs to be connected (in our case MMS) and your email address. The parameters will come to it.

There is also a support service for Yota network users. The subscriber can ask his question via SMS by sending a request to number 0999. You can get advice on the operator’s website or in a special mobile application.

Entering parameters manually on Megafon

You can set up MMS on Android through menu items. Its headings vary different models smartphones. Basically you need to go through the following points:

Settings.
Wireless network.
Mobile network.

Standard parameters have been prepared for Megafon subscribers:

MMS cost may vary depending on conditions tariff plan. Special offers from the Megafon operator will help reduce the cost of sending multimedia messages. There is no charge for incoming MMS.

Settings for Tele2 users

To send music and pictures from a Tele2 number in messages, the operator provides the following parameters:

In order to send MMS from your Tele2 number in the future, you will need to register in the system. To do this, after entering all the data, you need to send a multimedia message to yourself or another user.

If registration is not completed, your phone will receive not incoming MMS, but links to go to the Gallery. The same links will also be sent when sending a multimedia message to a device that does not support this function. When you start working with the MMS Gallery, instructions with a sequence of actions will be displayed on the screen.

How to enable MMS sending for a Beeline SIM card

First, you should look for the name “Beeline MMS” in the list of profiles. If it is not displayed, proceed to creating a profile with that name. For a Beeline SIM card, the parameters are listed below:

To complete the operation, you need to go to the messages menu and select “MMS settings”, then click on connection profiles. You need to make sure that the newly created Beeline MMS is selected.

After completing all operations, it is worth checking the result. Create a message, add a melody, photo or video to it and send it to the subscriber. If the MMS is delivered, it means that all actions were performed correctly. If you are notified of an error, the entered data should be checked again.

On modern phone models, most settings are made in automatic mode, but sometimes crashes occur and some options are not activated. On older phone models, you often have to configure various functions manually. Those who like to share photos and videos via SMS need to check their settings. We will talk in more detail about how to set up MMS on MTS in this review.

Description of the service and cost of MMS messages

Almost all MTS tariff offers include the service of using MMS messages. Despite the fact that today most subscribers prefer to send media files through various social networks and instant messengers, the use of MMS messages is still as popular as before. The advantage of this method of sending media files is the ability to share photos with friends without access to the Internet. To send MMS, you do not need to have an Internet connection on your phone.

Setting up and connecting the service is free. Sending files is paid in accordance with the prices for this service on your tariff. Many tariff plans offer packaged MMS, since the cost of the package is cheaper than sending MMS without a package. On average, the cost of one message is 7 rubles. Active MMS users can purchase a package of 10, 20 or 50 MMS or activate the MMS Plus option.

The cost of packaged MMS is as follows:

10 MMS – 35 rubles,
20 MMS – 60 rubles,
50 MMS – 110 rubles.

By activating the package, you can share media files at a lower cost.

Automatic MMS setup

After installing the SIM card on the phone, all the necessary parameters will already be saved in the mobile device. But if MMS messages are not sent, then you need to configure them. There are two ways to configure MMS messages on an MTS SIM card: manually and automatically.

MMS can be automatically configured via a computer by going to the official MTS portal in the settings section. After following the link, enter phone number, to which the necessary parameters will be sent to you in the near future. Next, you need to save them and restart (turn off, then turn on) the phone. Now MMS messages are configured and you can test the service by sending a picture to another subscriber.

Manual MMS setup

If the settings were not sent to you or could not be saved, you will need to configure the messages manually. Depending on the type of mobile device, the names of the sections and the parameters themselves may differ. Below we will tell you in more detail how to set up MMS on the most popular operating systems Oh.

MMS settings on an MTS SIM card for Android

Go to "Wireless Networks"
Click on the column “Internet access points”,
Click on the word “Create APN”.

To create an APN, use the following information:

Profile (name): MTS MMS
Initial (start) page: http:/mmsc
Data channel: GPRS
Access point: mms.mts.ru
IP protocol address: 192.168.192.192
Wap port x: 9201
Wap port 2.0: 9201 (8080)
Username and password: mts

After completing manual settings, send MMS to phone number 8890. Sending a message is free.

MMS settings on the MTS SIM card for iPhone

Select the “Settings” section on your mobile phone,
Go to “Cellular Communications”
Open the "Data Options" section
Click on the sub-item " Cellular network data transmission",

Options for the Cellular Data section:

APN: mts.ru

MMS parameters:

APN: mms.mts.ru
Username and password: mts
MMSC: http:/mmsc
MMC proxy: 192.168.192.192:8080
Maximum message size: 512000
URL: MMS UAProf

Parameters of the “Modem Mode” section:

APN: mts.ru
Password and username: mts

After completing manual settings, send an MMS to 8890. Sending a message is free.

MMS settings on an MTS SIM card for Windows Phone

Open the “Settings” section on your mobile phone,
Go to the "Data Transfer" section
Click on the sub-item “Create (add) mms access point”,
Next, fill out all the fields in accordance with the instructions below.

Access point setup:

Access point: mms.mts.ru
Password and username: mts
WAP gateway: 192.168.192.192
Gateway port: 8080
MMS Center (URL): http://mmsc/
MMS center port: 8080
IP type: IPv4v6

Attention: After making the settings, save them, then turn off and turn on your mobile device.

Why aren't MMS sent?

If all parameters are configured correctly, but MMS are not sent, then try the following:

Turn off iMessage. Go to the “Settings” section, select “Messages”, scroll the slider next to the word “iMessage”. If this function is enabled, MMS messages will not be sent. To send, you will have to switch this mode.
Enter your number in your phone settings. In the “Phone” section, select “My number” and enter your phone number. Then save the settings.
Check if the Cellular Data option is enabled. Select the “Cellular” option in the menu, then opposite the “Cellular Data” function, check the position of the slider.
Switch to 3G mode. Under Cellular Data, select Voice & Data and switch the slider to 3G. Switching to this channel is only necessary if you are using 4G mode. Unfortunately, in the last type of mode, receiving and sending MMS is impossible.
Reset your network settings and manually set new MMC settings.

If manual MMS settings failed to install on your phone, contact the company’s technical support by calling 0890 and ask an employee to send you the settings. The employee will send them via SMS message. You can also come to a mobile phone store and ask for help from the company’s specialists with a mobile phone and a valid SIM card. Our staff will help you resolve this issue.

How to watch MMS

You can view MMS only on mobile phones or at tablet devices, if installed on both this service and all settings are completed. On older phone models, such messages often open incorrectly; for example, color pictures may be displayed in black and white, or the user will receive a regular SMS with a link to this media file, which can only be opened if there is an Internet connection. Moreover, such a link leads to the MTS portal, respectively, after clicking on the link, you will first need to specify your login and password, and only then the picture will open. As you understand, this way of viewing files is very inconvenient, so users of older phone models are better off using various instant messengers and social networks to view multimedia. And this is only possible if the phone supports the Internet access function.

With the advent of multimedia messages (MMS), MTS users were able to send audio files, videos, photos and formatted texts from one cell phone another. However, some subscribers encounter difficulties setting up and using MMS. To cope with this problem, it is enough to perform simple steps to configure the service.

How to connect

Most tariffs from MTS provide for automatic activation of the MMS service. The cost of sending one multimedia message depends on the terms of the tariff plan and the additional options connected. In some cases, the service must be activated manually. To do this, you must use one of three options:

The above methods assume automatic activation services, after which subscribers can begin exchanging pictures, video files, etc. To minimize the cost of MMS exchange, it is recommended to subscribe to an additional package for a month for 35 rubles to send 10 messages.

Setting up MMS on MTS

In 90% of cases, the service is configured by default after a SIM card is inserted into the smartphone. If MMS exchange is not activated, you can use the mentioned methods for ordering settings via the MTS website, USSD command or SMS message. To get the settings, you can simply call the operator at 0876 or send an SMS (without text) to 1234.

Immediately after the settings arrive, they are saved and the phone is rebooted. To activate the service, you should send a trial MMS to 8890. After completing these actions, the subscriber can send multimedia messages without any problems and send them to other mobile users.

In some cases, automatic settings are not saved, so to fix the problem they must be entered into the phone manually. Find the “Internet Access” or “MMS Settings” section.

Create an additional profile with the following parameters:

Profile name - any (preferably in Latin);
Access to the Internet - mms.mts.ru;
Profile name and password - mts (any is possible);
Home page - http://mmsc;
Proxy ports - 8080 (for outdated modifications of mobile devices 9201);
Proxy - 192.168.192.192.

In columns that were not listed in the list, settings and data do not need to be changed. After saving the changes, you should restart your mobile device and send an MMS to 8890.

Is it possible to send MMS for free?

commit free shipping multimedia messages are only possible via the Internet on the MTS website. In the appropriate form you must enter:

MMS sender and recipient number;
Text title in the “Subject” column;
Text in the body of the letter (no more than 1000 characters);
Attach additional file(picture).

After filling in the required fields, click on the “Submit” button. This service has its own restrictions on the number of MMS sent from one IP address - no more than one message per 2 minutes. The total size of MMS cannot exceed 300 KB and be sent more than once every 2 minutes to the same subscriber or to the same IP. It should be taken into account that free MMS will not reach those users who have a ban on receiving information messages from the site mobile operator.

Automatic setup

Immediately after installing a SIM card on your phone, usually all the necessary parameters are set by default. But sometimes MMS messages are not sent or not received. Let's see how to set up MMS on MTS in automatic mode.

This can be done through a computer on the official website of the MTS company. Required:

Login to the site.
Enter your phone number.
When a file with parameters arrives on your phone, you need to save it and restart (turn off and on) the phone.
Now you can test the system, all parameters will be configured.

Just send the picture to another subscriber who already has this mode.

Manual setup of MMS on MTS

If it was not possible to obtain the parameters, or they cannot be saved, then in order to connect MMS to your phone in the MTS system, you will need to perform all operations manually. The course of action depends on the type of OS installed on the device - Android or iOS.

For Android devices:

enter the "Settings" section;
select "Wireless networks";
go to "Internet access points";
select "Create APN".

In this subsection, select:

profile name: MTS MMS;
start page: http://mmsc;
data: GPRS;
IP protocol: 192.168.192.192;
Wap port x: 9201;
Wap port 2.0: 2901 (8080);
username and password: mts.

After finishing the settings mms mts, send a free MMS to 8890

If you're on an iPhone, do:

in the "Settings" section, in the "Cellular" sub-item, enter the "Data Options" section;
Go to "cellular data transfer".

Fill in the following fields:

APN: mts.ru;
Login and password: mts;
MMSC: http:/mmsc;
Proxy: 192.198.192.192:8080;
Message size: 512000;
URL: MMS UAProf.

After completing the verification, send a free MMS to 8890

After saving the manual setting, reboot the system (turn off and on the phone).

Subscribers of the mobile operator Tele2 have the opportunity to exchange multimedia messages, provided that the service of sending and receiving MMS is activated on their number. To activate this function, you must enter the appropriate settings for MMS messages from the Tele2 telecom operator into your mobile device.

Multimedia messages

The MMS service allows subscribers to send and receive messages containing attachments in the form of photographs, audio recordings and videos. Usually, modern smartphones and phones are designed in such a way that they are capable of automatically compressing the size of transferred files, and successfully sending multimedia messages, despite some restrictions on their sizes provided by the network.

To successfully send and receive MMS messages, it is necessary that the sending and receiving device have the required function and be configured in accordance with the parameters set by the Tele2 telecom operator.

Some models of smartphones and tablet PCs are capable of making the necessary parameters and settings on one's own in automatic mode. All you have to do is insert a SIM card from the Tele2 operator, and after a while you will receive SMS messages with all the necessary settings and instructions. All you need to do is agree to accept them.

However, if you are unlucky and your device could not do this without your participation, do not be discouraged. Just help him by specifying the necessary options manually.

Regardless of how your device was configured - manually or automatically, the new settings for sending MMS messages will take effect only after the device is rebooted.

Request for automatic settings

If, after turning on the Tele2 SIM card, SMS messages with automatic settings for your phone model, you can always request them. You can do this in one of the following ways:

Make a call to the short number 679.
Order settings in your personal account.

After your application has been processed, you will receive an SMS message with the necessary phone settings. Agree to accept them, and then reboot your device.

Entering parameters manually

Those who, for some reason, were unable to set the settings automatically will have to enter the parameters manually. All operations, regardless of the device and the operating system installed in it, are done in the section "Settings".

The standard parameters for activating the option to receive and send MMS messages from the Tele2 operator are as follows:

In the line you write the name of the profile - Tele2 MMS;
select the channel for data transmission – GPRS;
address home page write it like this - ;
The access point line looks like this - tele2.ru;
port number: 8080 (or 9201 for WAP 1.x phones);
Enter the numbers in the IP address line: 12.40.65.

Lines that require a password and username should be left blank.

These are the standard parameters for MMS messages. However, when setting up a specific device, the user may have questions. This happens because mobile devices work at the base various operating systems, and when entering parameters you should take into account some nuances.

Android

In devices running on Android, in order to register a new access point, you should go to: Phone menu - Settings - More - Access points (APN). Then call up the additional menu and enable the option to create a new access point. In the window that opens, you should enter the standard parameters in the appropriate lines.

iOS

In devices with operating iOS system follow the path: Menu – Settings – Cellular communications – Cellular data network. Next, fill out just three lines to configure the MMS:

APN: tele2.ru;
in the MMSC field put: ;
In the MMS proxy line you write: 12.40.65:8080.

Leave all other lines blank.

Windows

The peculiarity of setting up devices running on Windows is that, among other parameters, you will need to set IPv4 in the “Network type” line, and “None” in the “Authentication type” line.

Find out more detailed information You can configure a specific version of any operating system on the official website of the mobile operator Tele2.

Please note that after setting the MMS parameters, you must send a multimedia message to any Tele2 subscriber.

This is done so that the communication system “sees” that your device has access to this function. Otherwise, you will not be able to receive MMS messages sent to you, but will only see a link leading to the MMS gallery page and a password to view it.

If it happens that you followed all the recommendations and entered all the necessary data, but the MMS service still remains unavailable, do not despair. First, check again, perhaps you made a mistake somewhere when entering the settings. Fix it and don't forget reboot the device.

But even if this does not help, remember that you can always turn to Tele2 specialists for help at the nearest office or communication store, where you will definitely receive qualified assistance on any issue that interests you regarding communications and services provided by Tele2.