Installing a tp link tl mr3420 router. Setting up a tp link tl mr3420 router: step-by-step instructions. Setting up a PPPoE connection

The TL-MR3420 router model from the manufacturer TP-Link is an excellent solution for cottages and country houses, since support for 3G modems will not allow you to be left without access to the Internet if there is no wired channel. At home, if the main provider decides to arrange a maintenance day, the router will automatically establish a 3G connection. Like any review wifi routers, let's look at its characteristics and basic settings.

Equipment and appearance of the router

The router and all components are placed in a colorful green box made of thin cardboard. On all sides of the box there is a photo of the device, its main characteristics, advantages and connection diagram. On one of the sides there is a list of guaranteed supported 3G modems.

Router Packing Box

Standard delivery set:

Router tp link tl mr3420;

Two removable Wi-Fi antennas;

Power supply with a meter cord;

Network cable patch cord, also one meter long;

CD with electronic versions instructions;

Router equipment

The router's body is milky white, made of plastic that is pleasant to the touch, and leaves virtually no fingerprints.

Router appearance, front panel

Front and back panels router, bottom

The front panel contains LED indicators - power availability, router status, Wi-Fi and LAN connection activity, Internet connection via 3G connection and QSS activity. The QSS activation button is also located on the front panel. Flashing LED indicates there is traffic in this moment through this connection to which the LED belongs.

On the rear panel, the tl mr3420 router is equipped with ports for connecting network cables, antennas, a power supply and a 3G modem.

Rear panel of the router

Along the edges are connectors for connecting antennas, from left to right is a socket for connecting a power supply, 1 WAN port (for connecting to a provider), 4 LAN ports (for connecting computers local network), a USB port and a “Reset” button recessed into the case, necessary if setting up the tp link mr3420 router led to disastrous consequences and you need to return the settings to factory values.

On the bottom of the router there is a sticker with serial number router, its MAC and IP address, login and password to enter the settings menu and other useful information.

Bottom of the router

There are also slots on the bottom for screw heads for mounting the device on the wall.

Router Specifications

The capabilities of the router model in question are quite high:

Router characteristics

Software implementations are also suitable for the vast majority of home users and office networks:

Software implementation of the router

The router is powered by a 400 MHz central processor controlled by the Atheros AR7241 system chip. This chip also controls the USB interface and wired connection ports. Wi-Fi module runs on the AR9287 chip, also developed by Atheros. Volume random access memory is 32 MB, flash memory - 4 MB.

Setting up the router

Entering the settings menu

If you need to configure the tl mr3420 router, then first of all you need to connect to it using a computer. To do this, use the included power cord to connect one end to network card computer, the other end to any of the LAN ports of the router. Turn on the router and computer. After downloading, open any web browser on your computer and enter 192.168.1.1 in the address bar.

Entering the username and password to enter the settings menu

Quick router setup

First of all, a window opens with the current state of the router.

Initial settings window

The settings window is divided into three main areas - on the left is a tree for selecting a setting item, in the center is the actual setting of the selected item, on the right is a hint for the selected item. Unfortunately, the Russian language is not provided.

For quick setup, select the “Quick Setup” menu.

Quick setup, introductory

The first Quick Setup window shows you how to configure. This is an introductory window, click the “Next” button.

Adding Wi-Fi devices

In the second window, you need to enable/disable the QSS function (this function is better known as WPS), in the “Current PIN” line, enter the password to connect to the wireless Wi-Fi networks(at least eight characters), using the “Add device” button you can immediately connect the necessary wireless devices.

Click “Next”.

Choosing a method to connect to the Internet

In the third window, select your preferred Internet access option:

3G is preferred, wired is backup;

3G only;

Wired is preferred, 3G is a backup;

Wired only.

Select a mode and click “Save”.

Setting up connections

Setting up a 3G modem

Everything is simple here - select the country and mobile operator. But there is one very interesting nuance - the Beeline operator is hiding under the country “Russia”, and Megafon and MTS are hiding under the “Russian Federation”. A strange solution, but no one has ever fixed it.

All other settings are already saved in the router’s memory, click “Save”. If the required operator is not in the list, then check the box next to “Set the Dial Number and APN manually” and the settings lines will become active - you can enter all the necessary data manually.

Setting up a LAN port

Here we configure local LAN ports - IP address and subnet mask. Click “Save”.

In the sixth window, configure the global WAN port. It all comes down to choosing a static or dynamic IP, the type of connection to the provider (PPTP, L2TP, PPPoE or BigPond). Leave the remaining options as default, click “Save”.

Wi-Fi setup

In the next window the settings are made wireless Wi-Fi connections. In the “SSID” field, enter the name of the network, select the region, channel, standard, channel width and maximum bandwidth. Click “Save” and proceed to the wireless connection security settings.

Setting up Wi-Fi security

Setting up Wi-Fi security

We select it, in the “PSK Password” field we enter the password for connecting to the Wi-Fi network, at least eight numbers and symbols of the English alphabet. Click “Save”.

Setting up a DHCP server

In the next window, the DHCP server is configured, in other words, the automatic assignment of IP addresses to connected computers.

Setting up a DHCP server

Click the “Enable” button, specify the range of addresses, and leave the rest as is. Click “Save”.

That's it, the basic, but very thorough, settings are completed.

It is important to know that depending on the mode selected in the third window, several additional windows may be added, but all the settings are intuitive, and you don’t have to be afraid of “dancing with a tambourine.”

Setting up the TP-Link TL-MR3420/3220 router:

Updating the software can solve the problems of previous software versions and improve the current performance of the device.

FOR UPDATE

IMPORTANT: To avoid problems when updating the software, please read the following information about the update procedure.

• Check that the hardware version and software version match. Installation wrong version The software may damage your device and void your warranty. (Usually V1.x =V1)

It is NOT recommended to install a software version that is not intended for your region. Click to select region and download the most current version BY.

• DO NOT turn off the power during the update process as this may damage the router
• Do NOT update your router software over Wi-Fi unless this is the only way.
• It is recommended that all users stop using all Internet applications on the computer or disconnect the network cable from client devices before updating.

Note: Configuration files may not be installed correctly on new firmware versions that require a factory reset.

Recommendations for updating software: Wi-Fi router, Wi-Fi router with ADSL2+ modem, Wi-Fi signal amplifier

Using third-party software on devicesTP- Link

The official software of TP-Link devices can be replaced with third-party software, for example, DD-WRT. TP-Link is not obligated to provide service or technical support for devices with third-party software and does not guarantee its stable operation. Damage caused to the device as a result of using third-party software will void the warranty.

Open source for programmers (GPL)

The following information is intended for programmers and is not relevant to most end users TP-Link products.

TP-Link products contain code developed by third parties, including code developed under the GNU General Public License (GPL) version 1/version 2/version 3 or the GNU Lesser General Public License (LGPL). You may use the corresponding software under the terms of the GPL license.

You can view, print and download the relevant GPL license terms. The GPL Source Center provides you with downloadable GPL source code for the relevant software used in TP-Link products, as well as other information, including a list of TP-Link software that contains GPL source code.

TP Link TL-MR3420 is one of the most worthy representatives of budget class routers that support settings for Internet-based networks from Rostelecom. Among the huge range of routers, choosing the most suitable model for home or office use is very difficult. If you plan to create a small work network and connecting additional equipment, for example, then the TL-MR3420 router from TP Link will be the best option, which will not only allow you to organize the uninterrupted operation of all devices, but will also help reduce costs.

Setting up the TP Link TL-MR3420 router from Rostelecom

The TP Link TL-MR3420 router is very popular for setting up services provided by Rostelecom. To start working with the equipment, we will need to connect the power supply, Internet cable (WAN) and Ethernet cord to the corresponding connectors located on the back of the router. Then we must proceed to connecting the network cable to the computer, with the help of which further configuration will be carried out. The compact body of the TL-MR3420 model contains three devices:

• 3G modem (USB-Ethernet output);
• Wi-Fi access point;
• LAN router.

This allows you to make a router from TP Link a universal equipment that does not take up much space in your home or office.

Selecting a location for installation and connecting the device

Before you start self-connection TP Link TL-MR3420 or use the services of a specialist from Rostelecom, you need to choose the optimal location for installing the equipment. There are recommendations to consider:

• Availability free space(at least 30 cm above the router);
• absence of a nearby heat source (it is advisable to avoid places where direct sunlight may fall);
• opportunity quick access to the connectors.

A suitable option is often to place the router on one of the walls, where there is sufficient air access for ventilation of the equipment.

Setting up the TP Link TL-MR3420 web interface for Rostelecom

The router is configured using the interface on the web page. It will not take a significant amount of time, thanks to the intuitive layout of the options. To enter the basic parameters, go to the WAN network subsection and select the connection that corresponds tariff plan. To organize a PPPoE connection, enter the password and login data into the appropriate fields. This information is issued to the subscriber at the time the contract is concluded. After filling in the data for connecting Rostelecom, we confirm and save the changes.

You can view price offers for roaming from Rostelecom abroad at.

When setting up the TP Link TL-MR3420 router with a connection to services from Rostelecom, you must adhere to the following sequence:

• open an Internet browser;
• enter the device’s IP address in the address bar (192.168.0.1);
• go through the authorization procedure by entering your login and password information (by default this is admin/admin);
• specify the connection details of the provider.

You can also choose Extra options devices that are used by the subscriber, for example, television.

Attention! If Internet access from Rostelecom is provided using ADSL technology, then you will need to configure the connection on the modem, and only then connect the Ethernet cable from it to the router connector. In this case, it will be unnecessary to enter your Internet login information on the router itself.

Wi-Fi network settings

The TP Link TL-MR3420 router works not only as a wired router. With its help, you can easily organize Internet distribution for your entire home or office network by connecting wireless equipment and several devices with Ethernet connectors.

To configure Wi-Fi parameters in the TP Link TL-MR3420 router, you need to activate the corresponding communication module, with the help of which the Internet will be distributed from Rostelecom. To do this, in the web interface, go to the section called “Wireless Mode”. Here we arbitrarily set the name of the Wi-Fi point, and also select the network protection parameters. After confirming and saving the options, wireless connection will be completely ready for work.

High performance TP Link TL-MR3420 for both budget device and support for high-speed data transfer standards up to 300 Mbit/s allow its owners to comfortably use the Internet connection. With it, you can create a wireless secure network and use the router for internal data exchange. The equipment makes it possible to quickly and easily organize home network with support for IP television and telephony from Rostelecom.

You can find a huge amount on the Internet general information about the router settings. But sometimes you need help specific model. There are a huge number of router options available on the domestic market for network devices. One of the best - TP-Link router TL-MR3420. In this article we will review this model, show how the setup is done, and tell you how the firmware is installed.

Router with support mobile modems

Specifications

TP-Link presents its model as a Wi-Fi router with support for mobile modems, operating in the 802.11n range and providing wireless connection at speeds up to 300 Mbit/s. Guaranteed support for 3G/4G mobile modems of GSM and CDMA standards. Therefore, this router can be used even in those homes where it is impossible to connect a wired connection.

Since the mobile Internet is already catching up in speed to the wired one, you can choose a solution from a cellular operator and distribute the network using TP-Link TL-MR3420 to all your devices. You can configure automatic switching between mobile and wired networks, which will ensure constant connection availability. High data exchange speed will allow you to transfer large amounts of information. Quick connection is possible at the touch of a button using QSS technology. Easy adjustment of the required channel width for each device. The WPA/WPA2 security protocol will reliably protect you from outside threats. Two antennas will provide a powerful and stable signal.

Menu overview and setup

The router is connecting traditional way. Connect it to the power supply, plug the Internet cable into the blue connector, connect it to the computer network cable, which plug into one of the yellow connectors. To use mobile modems, plug them into the USB port of the router.

You can enter the settings menu through any browser. Enter 192.168.0.1 in the address bar. The program will ask for a login and password; by default they are set to admin/admin. Enter all the data and click “Login”. The interface is made in the company's traditional green colors. IN top menu The company logo and model name are displayed, menu items are in the left column, and menu items are in the right column. reference Information, and system information is displayed in the middle. In the main window you can see what version of the firmware, network parameters, wireless mode settings and statistics of used traffic.

When you first start it, the router will offer a quick setup. First of all, select the network operating mode:

• Preferably 3G/4G - mobile connection will be the main one, and the wired one will be the additional one.
• Preferably WAN - in this case, the opposite is true, the main connection will be wired, with the mobile connection as an auxiliary connection.
• WAN/3G/4G only - the only connection will be cable or mobile, respectively.

It can be done in the Network - Internet Access section.

Settings mobile internet done in the Network section - 3G/4G. Select “Russia” in the “Region” item and your operator in the drop-down list. Leave all other settings automatic. If the operator is not listed (which is unlikely), enter all configurations manually.

Setting up a cable connection is done in the same way: Network - WAN, select the region Russia, your region and city, the name of the provider from the list. If it is missing, select the connection type (check with your provider) and add the necessary parameters (see the connection agreement or check with the provider’s technical support).

After this, you will need to configure network security. Go to the “Wireless Mode” menu, rename the connection, select the wireless broadcast mode. The default is “11bgn mixed”, we recommend leaving it. Then, in the “Wireless Security” tab, enable WPA/WPA2-Personal and AES encryption. Change the default password. The rest of the settings are quite specific; it is not necessary to change them for everyday work.

Device firmware

To improve some functions and more stable operation, the manufacturer regularly releases new firmware. You can update them yourself and completely free of charge. To do this, you need to download the software file from the official TP-Link website using this link.

First you need to select the hardware version. You can recognize it on the bottom surface of the device. Near the barcode with the serial number you can see the designation V1, V2 or V3. In addition, on home page The settings menu also displays this information in the “Hardware version” line.

On the manufacturer’s website, open the list of versions, select yours in the pop-up window, go to the “Firmware” tab and download latest version. Next, unpack the archive with the firmware file. Its extension should be .bin. In the router settings window, go to System Tools - Firmware Update, select the firmware file and click the "Update" button. After a few minutes, the device will reboot and start with the updated software. Please note that in most cases all settings will be reset to factory defaults, so you will have to re-enter all parameters.

Conclusion

The TP-Link TL-MR3420 Wi-Fi router is considered one of the best on the market. Its firmware works stably, provides a high-quality signal, it can distribute the Internet from 3G modems, and its setup is very simple. Therefore, if you are looking for a solution for your home, choose this model.

When installing a newly purchased router to provide a local network and Internet access, it needs to be configured. The main points include assigning an IP address to all devices on the local network, creating a Wi-Fi point, checking the Internet, changing the local administrator password. This setting is given by example TP-Link router TL – MR3420.

Router features

TL-MR3420 is a stationary router that belongs to the TP-Link N series. Its peculiarity is that you can connect a modem via a USB port and use 3G/4G Internet.

The router also has 2 antenna amplifiers, so wifi signal strong enough. Unfortunately, only the 2.4 GHz Wi-Fi frequency is used, so you can create one access point with speeds of up to 300 Mbps.

Otherwise, everything is standard: 1 WAN, 4 LAN, QSS button, on/off button, Wi-Fi button recessed into the body. There is an indication on the front panel.

Settings

In general, the settings of the TP-Link TL-MR3420 router can be done in any order. The main thing is that you have access to the router’s web interface. If you have used the router before starting, it is recommended to reset the settings to factory settings. This can be done by holding down the QSS/Reset button on the back of the case for 10 seconds.

This model works with an updated interface and an automatically enabled DHCP server (IP addresses are assigned to computers, smartphones and other network devices automatically), which makes setup even easier.

The most complete guide on the operation and configuration of the TP-Link TL router – MR3420 in Russian can be downloaded HERE.

Physical Internet connection

If you use Internet from a provider, connect the cable that goes to the apartment to the WAN connector. Possible instead of or together with wired internet connect a 3G/4G modem via USB to receive Internet from two sources.

Turning on Wi-Fi or connecting a PC to a router via LAN

On the body, from the side USB port, press the Wi-Fi button. If the indication wireless network lights up, you can connect to the router via Wi-Fi point:

1. Open the Wi-Fi networks search section.
2. Join the point with the name of your router model.
3. Done, you can log in to the settings web interface through your browser.

To connect devices wired, connect the network port of the computer and the LAN of the router with an Ethernet cable.

Login to the web interface

To log into the web interface personal account, go to tplinkwifi.net or 192.168.0.1. Create and confirm a password for future logins.

Then press the login button.

Quick setup

The web interface has a quick TP-Link settings TL – MR3420 for the mode you need. Here are your instructions:

1. Go to the “Quick Setup” section and select “Time zone”.
2. In the installation wizard, select the mode you need and click Next.
3. If you are using only a WAN connection, select Wireless Mode.
4. If you receive the Internet from a WAN and a 4G modem, and you want them to work in the “always ON” mode, that is, the Internet automatically switches to another channel, if there is none on the first one, select Wireless Router Mode with 3G/4G Backup.
5. And if the Internet is only from a USB modem, your choice is 3G/4G Router Mode.

1. In the next paragraph, set Wi-Fi settings dots: change the name, security type, create a password.
2. Review your changes and check that your connection is available.

NB! If the registered MAC address of the device that the provider prescribed for registration differs from the actual one, the Internet may not be provided.

For correct operation, go to Advanced – Network – Mac Clone, enter the required MAC address in the WAN section (as provided by your provider) and click Save.

Additionally, in order to open sites running on IPv6 without problems, it is recommended to use the following instructions:

1. Go to Advanced – Network – IPv6 Tunnel.
2. Select 6to4 tunneling.
3. Select WAN connection from the drop-down list.
4. Click "Save".

How to update and configure the router is described and shown in the following video (Russian interface):

Changing Login Settings

You initially set the login password, but you can register with TP-Link ID to log into the web interface or mobile application and control the router remotely.

To configure the TP-Link TL-MR3420 router in this way, you need to:

1. Go to the TP-Link Cloud section.

1. Click Register Now.
2. Specify Mailbox, from which you have access.
3. Receive an activation email.
4. Create a password and save it.
5. Your email and password will be needed in the future to log into the web panel.

If you need to manage your router remotely, be sure to install the TP-Link Tether app on your smartphone.

Conclusion

With easy connection and quick setup, you can organize correct work networks and stable Internet access in 10 minutes. The router's web interface is generally clear, so personalizing device settings will not cause difficulties, even if a non-Russian interface is enabled.