SmartBuy flash drive recovery. Instructions for restoring flash drives Firmware for smartbuy 8 gb flash drive

Almost every person who is in one way or another connected with computers has at least once encountered the problem of a flash card malfunction. It can be expressed in different ways: Windows does not see the flash drive, refuses to format it, failures occur when copying and moving files, or the wrong amount of memory is determined.

You can restore a Kingston drive using special software

Most simple cases can be cured by simply formatting the flash drive using operating system Windows. To do this, you need to insert it into the computer and after identifying it, go to My Computer, right-click on the drive and select Format. After successful formatting, the system will notify you about this.

If, after formatting, problems remain or it ends in failure, for example, the operating system generates an error - “Windows cannot complete formatting,” then you need to try another method. For example, Kingston provides special tools for its drives to restore their functionality. The Kingston flash drive recovery program can be easily downloaded from the company’s official website, in the support section. After downloading, you need to unpack it and run it. In the window that opens, select the required drive and click Format. After formatting in a special way, the flash drive should work.

Another method worth trying is to use a low-level formatting program. Such a program, for example, D-Soft Flash Doctor or similar. It is not targeted at any specific drive or manufacturer, so it can format any flash drives and memory cards.

If all these actions lead to nothing, then there are serious problems with the controller.

Restoring a Kingston flash drive using firmware

You can restore a flash drive by using a special utility for low-level firmware of its controller. But there are situations when the device really cannot be helped by anything other than physical intervention, such as soldering or connecting to special devices.

If the drive has the following viability criteria, then there is still a chance to restore it:

Windows detects the flash drive when it is plugged into the computer port;
after inserting the flash drive into the connector, the system automatically asks for formatting;
the drive identifies itself, is visible in the system, and when accessed, the message “Insert disk...” is displayed;
systematic errors when copying or moving files to a flash drive;
Slow speed of the drive as a whole.

Before you restore the Kingston flash drive, you need to find out the controller identifiers. You need two of them, the first - VID, contains the manufacturer's identifier. The second is PID, which stands for product code. You need to determine them with a utility like Flash Drive Information Extractor. Once you receive them, you can write them down somewhere.

Finding a recovery utility

Directly for the firmware you will need special utility, capable of flashing a flash drive controller at a low level. Such special programs Usually available only from equipment manufacturers. With their help, they carry out initial firmware, repair and testing of devices. Sometimes these utilities end up online by accident, and sometimes manufacturers share them. But the whole problem is that each manufacturer has its own utility, which can be different depending on the controller model and the amount of memory.

To find the right program specifically for the model being reanimated, you will need SID and PID. There is one service on the network called Flashboot.ru, which stores thousands of utilities for firmware various devices and gadgets.

You must enter the received numbers into the SID and PID fields and click search. The service can display several program options at once. You need to choose the one whose description indicates the corresponding volume of the drive being restored. The list may also contain utilities for other manufacturers. You need to remember that you need to restore the Kingston flash drive, so select the most suitable configuration from the list. The Utils field describes the name of the program. After finding the desired line in the list, you need to copy the name of the utility and go to the files section of the flashboot.ru website. You need to paste the copied name into the search bar and click find.

After finding the utility, you need to download it to your computer and unpack it. Sometimes a situation arises when the program you are looking for is not in the files. Then you can simply search for her by name in any search engine.

Using a program to recover a Kingston flash drive

Using the utility is the simplest part of the operation. You just need to insert the USB flash drive, launch the program and click on the Start button in the program. Of course, the design, localization and operating methods of different utilities for different flash drives may be different, but the essence is the same, and it is intuitive. After successful flashing of the controller, the operating system may immediately offer to format the revived flash drive.

If all else fails

If nothing helped or the utility was never found, this means that, most likely, one of the modules of the drive’s electrical circuit is physically damaged. In such a situation, only a service center can help. Specialists will be able to physically connect to the contacts of the flash drive and analyze or scan for damage. If the flash drive can be repaired, then it will be repaired, but if not, then nothing will help it.

Many users face problems when the USB drive(flash drive), and even such a reliable company as Kingston is no exception. Symptoms that the drive has failed, but it can still be saved are the following:

Problems when writing or reading data from a flash drive to a computer, freezing, crashes;

The flash drive appeared in Explorer, or any file manager, but it is impossible to open it, it produces various error messages;

When you connect a drive, the operating system always prompts you to format it (even after the formatting procedure has been completed);

When connecting to a PC, the system displays a message about finding a new device, but it doesn’t go any further;

To restore the flash drive, you need special utilities for Kingston. To make the right choice, you need to know the controller model; we need information about the VID and PID of the flash drive (unique identifiers). You can find them out using the operating system, or by downloading and installing Flash program Drive Information Extractor.

First way. We connect the USB drive, call context menu my computer and go to “Management”, select “Device Manager” in the list of “USB controllers”, find “USB storage device”, in which we also open the context menu and select “Properties”. In the properties you need to select the “Details” tab and select “Equipment ID” from the drop-down list. This way we will get the information we need.

Another way is to get data using the Flash Drive Information Extractor program. After installing it, connect the USB drive and click on the “Get Data” button in the program.

Next, you need to use specialized sites to search for the necessary recovery programs (flashboot.ru is popular among them). In one of the sections, namely iFlash, by entering previously obtained data about the VID and PID of the drive, we will receive information that the utility should search for and download.

If you have a Kingston flash drive with a size of 8, 16 or 32 gigabytes, then the list of programs for their resuscitation will include the following utilities:
Phison Preformat;
AlcorMP AU698x RT;

After downloading the desired program, install it on your Personal Computer and launch. We connect the failed USB drive; if it appears in the program window, then it is selected correctly. All you have to do is select it and click on the “Start” button. The utility will correct all errors automatically. Disconnect the flash drive and check the result.

Various problems with USB drives or flash drives are something that probably every owner faces. The computer does not see the flash drive, files are not deleted or written, Windows writes that the disk is write-protected, the amount of memory is displayed incorrectly - this is not a complete list of such problems. Perhaps, if the computer simply does not detect the drive, this guide will also help you: (3 ways to solve the problem). If the flash drive is detected and works, but you need to restore files from it, first I recommend that you familiarize yourself with the material.

If various ways to correct USB errors drive by manipulating drivers, actions in Windows Disk Management, or using command line(diskpart, format, etc.) did not lead to a positive result, you can try utilities and programs for repairing flash drives provided by both manufacturers, for example, Kingston, Silicon Power and Transcend, as well as third-party developers.

On the official website of Silicon Power in the “Support” section there is a program for repairing flash drives from this manufacturer - USB Flash Drive Recovery. To download you will need to enter an address Email(not checked), then the UFD_Recover_Tool ZIP archive is downloaded, which contains the SP Recovery Utility (requires .NET Framework 3.5 components for operation, will be downloaded automatically if necessary).

Likewise previous program, for SP Flash Drive Recovery to work, an Internet connection is required and restoration of work occurs in several stages - determining the parameters of the USB drive, downloading and unpacking a suitable utility for it, then - automatic execution necessary actions.

Download the repair program Silicon flash drives Power SP Flash Drive Recovery Software is available for free from the official website http://www.silicon-power.com/web/download-USBrecovery

If you are the owner of the drive Kingston DataTraveler HyperX 3.0, then on the official Kingston website you can find a utility for repairing this line of flash drives, which will help format the drive and bring it to the condition it had when purchased.

Download for free Kingston Format Utility can be found at https://www.kingston.com/ru/support/technical/downloads/111247

ADATA USB Flash Drive Online Recovery

The manufacturer Adata also has its own utility that will help fix flash drive errors if you cannot read the contents of the flash drive, Windows reports that the disk is not formatted, or you see other errors related to the drive. To download the program you will need to enter serial number flash drives (so that exactly what is required is loaded) as in the screenshot below.

After downloading, run the downloaded utility and perform several simple steps to restore the operation of a USB device.

Official page where you can download ADATA USB Flash Drive Online Recovery and read about using the program - http://www.adata.com/ru/ss/usbdiy/

Apacer Repair Utility, Apacer Flash Drive Repair Tool

Several programs are available for Apacer flash drives - different versions Apacer Repair Utility (which, however, cannot be found on the official website), as well as Apacer Flash Drive Repair Tool, available for download on the official pages of some of the Apacer flash drives (look for your specific USB drive model on the official website and look at the downloads section below pages).

Apparently, the program performs one of two actions - simple formatting of the drive (Format item) or low-level formatting (Restore item).

Formatter Silicon Power

Formatter Silicon Power is a free utility for low-level formatting of flash drives, which, according to reviews (including in the comments to the current article), works for many other drives (but use it at your own peril and risk), allowing you to restore their functionality when no other methods don't help.

The utility is no longer available on the official SP website, so you will have to use Google to download it (I do not provide links to unofficial locations within this site) and do not forget to check the downloaded file, for example, on VirusTotal before launching it.

SD Memory Card Formatter for repairing and formatting SD, SDHC and SDXC memory cards (including Micro SD)

The SD Memory Card Manufacturers Association offers its own universal utility to format the corresponding memory cards if problems arise with them. Moreover, judging by the available information, it is compatible with almost all such drives.

The program itself is available in versions for Windows (Windows 10 is also supported) and MacOS and is quite easy to use (but you will need a card reader).

You can download SD Memory Card Formatter from the official website https://www.sdcard.org/downloads/formatter/

D-Soft Flash Doctor program

The free D-Soft Flash Doctor program is not tied to any specific manufacturer and, judging by reviews, can help fix problems with a flash drive through low-level formatting.

In addition, the program allows you to create an image of a flash drive for subsequent work not on a physical drive (to avoid further malfunctions) - this can be useful if you need to get data from a Flash drive. Unfortunately, the official website of the utility could not be found, but it is available on many resources with free programs.

How to find a program to repair a flash drive

Actually this kind free utilities There are far more options for repairing flash drives than are listed here: I tried to take into account only relatively “universal” tools for USB drives from different manufacturers.

It is quite possible that none of the above utilities are suitable for restoring the functionality of your USB drive. In this case, you can use the following steps to find the program you need.

Additionally: if all the described methods for repairing a USB drive did not help, try.

Kingston flash drives are distinguished by their reliability and long service life, but they are also not protected from various failures. Sometimes the drive actually “dies” and it is not possible to restore it. More often there are situations when a flash drive can be brought back to life using a special firmware utility.

Most often, Kingston dt100g2 and datatraveler flash drives break.

Is it possible to recover a flash drive?

Signs that the drive can be restored:

When you connect a flash drive, a notification appears that a new device has been detected.
The system prompts you to format the removable disk.
The drive does not open, but is shown in Explorer.
Errors occur when reading and writing data.

These problems can be eliminated by flashing the controller or formatting the media, but if the flash drive has important information, then before performing any restoration procedures you need to try to “pull it out”. Use to extract a recovery program like Recuva or so as not to lose the necessary files.

Search for a program for flashing the controller

To restore, you will need a special utility for a Kingston flash drive. In order not to make a mistake and download the right program, you need to know the drive controller model.

Method 1

Look necessary information You can go to flashboot.ru in the iFlash section, using the VID and PID values of the flash drive as a filter.

Connect the drive to your computer.
Open the device manager (right-click on the “Computer” icon - Manage).
Find "USB Mass Storage Device".
Right click and open properties.
Go to the Details section and select the Hardware ID property.

Method 2

Another way to obtain the necessary information is to download the Flash Drive Information Extractor program and click the “Get Data” button. The report will contain the lines “VID” and “PID”; use their value to find a utility that can correctly restore the Kingston Datatraveler flash drive.

You can download the program in the “Files” section on the website flashboot.ru. If the utility is not here, try to find it on other web resources.

Recovery utilities

You can find the desired program without a controller model - just type in the search engine the query “utility recovery kingston" In the results you will see several utilities, among which there will certainly be programs such as Phison Preformat, AlcorMP AU698x RT, etc.

The problem is that Kingston flash drive recovery programs only work if they are compatible with the controller installed in the drive. Therefore, if you download the first repair utility you come across, it may not detect the connected media.

When required program found, you can begin to restore it. Be sure to look at the instructions, which should be packaged in the archive along with the recovery utility - perhaps the program has a special operating procedure. The general recovery procedure looks like this:

You don’t need to do anything else: the program will automatically correct errors and return the flash drive to a working state. This completes the restoration of the Kingston flash drive; If the controller firmware did not help resolve the problem, then the cause of incorrect operation should be sought among hardware faults.

We restore USB flash drives Kingston

Kingston flash drives are very popular due to the fact that they are quite inexpensive and reliable. This is not to say that they are cheaper than others, but their cost can still be called low. But, since absolutely everything breaks in our world, it is not at all surprising that Kingston removable media can also fail.

This happens quite simply - you insert a flash drive into the computer, but it “does not want” to read data from it. The drive can be detected, but everything will look as if there is no data on it. Or simply not all data may be determined. In general, situations can be very different. In any case, we'll look at a few effective ways restoring the functionality of a Kingston drive.

Kingston has its own flash drive recovery tools. There is also a universal recovery method removable media, which is relevant for devices from any company. We will analyze all the most effective methods.

Method 1: MediaRECOVER

Click on the “Tools” inscription in the launched program.

In the field under the inscription " Select device» Select the inserted flash drive according to its letter. Then there are two options. We recommend using both options in turn - first one, and then, if all else fails, the second. It’s worth saying right away that none of these options involves saving lost data. So, the first option is to format the flash drive and automatically restore it. To do this, click on the button " Format" and wait until the formatting is complete. The second option is to erase and restore the removable media. Click on the button Wipe” and, again, wait until the end of the process.

The second option looks more “humane” for a flash drive. It just involves restoring the flash drive. In any case, if using MediaRECOVER does not help, move on to the next method.

Method 2: Kingston Format Utility

This is another signature Kingston program. It is suitable for all flash drives of this brand, starting with the DTX 30 series and ending with USB devices Datatraveler HyperX. This utility also formats the flash drive without a chance to save any information. To use Kingston Format Utility, do the following:

Download the program.Run the downloaded file. Unpack - specify the path and click on the “ Unzip" In this case, you don’t need to install anything, just launch this program using the shortcut. Further in the top field (“ Device") indicate your carrier according to its letter. File system will be determined automatically, but if this is done incorrectly, indicate it in the “ File system" After that, just click on the button Format" and wait until the formatting and recovery is complete.

Method 3: HDD Low Level Format Tool

Judging by user reviews, this program copes well with damaged Kingston flash drives. Low Level Format Tool works at a low level, so it is quite successful at what it does. And this applies not only to removable media from Kingston. But, again, the utility formats the flash drive and restores its functionality, but not the data from it. To use this program, you need to do very little, namely:

In the list of available storage media, select the one you need and click on it. This will make it stand out. After that, click on the “ Continue" It is located in the lower right corner of the program window.

Next, the specified storage medium will be checked. The field at the top will display information that all data from the media will be permanently erased. Click on the button Format this device" to perform formatting.

Wait until the end of the process and try using the inserted flash drive.

Method 4: Super Stick Recovery Tool

Another very simple program designed to recover Kingmax flash drives, but it is also suitable for Kingston (although for many this will seem quite unexpected). So, to use Super Stick Recovery Tool, do the following:

If everything is fine and the program can work with your flash drive, information about it will appear in the main window. Click on the button Update" to start formatting. After that, just wait until the process finishes and try to work with the flash drive again.

Method 5: Search for other recovery utilities

Not for all models Kingston flash drives The programs listed in methods 1-4 are suitable. In fact, there are a lot of similar programs. In addition, there is a single database with information about programs intended for recovery. It is located on the iFlash service of the flashboot website. The process for using this repository is as follows:

First you need to find out the system data of the removable storage device, and specifically, VID And PID. Without going into details, let's say that you can find this data standard means Windows. To do this, use the tool “ Computer management" To launch it, open the menu " Start"(Windows menu in later versions) and click on the item " Computer» right mouse button. In the drop-down list, select “ Control».

In the menu on the left, select “ device Manager" Open the section " USB controllers» and right-click on the desired media. In the list that appears, select “ Properties».

In the properties window that opens, go to the “Details” tab, select “ Equipment ID" Further, in the field “ Meaning"You will find VID And PID your flash drive. In the photo below VID equals 071B, A PID - 3203 .

Now go directly to the iFlash service and enter these values in the appropriate fields. Click the button Search" to find information about it. All entries relating to your device will appear in the list below, and in the column “ Utils"A link to the program or its name will be indicated. For example, in our case it was easy to find.

The name of the program must be entered into the search bar of the flashboot.ru website. In our case we managed to find Phison Format & Restore and several other utilities. Typically, using the programs found is quite simple. Click on the name of the program and download it, then use it.