How to set up a universal TV remote? Instruction. How to set up a universal TV remote control Instructions for using a TV remote control

Perhaps, now there is not a single living space or office where modern household appliances are not used. When it comes to television and radio equipment, then remote controls are always attached to it. And there are more and more such devices that make our life interesting, comfortable and diverse.

In order not to be confused every time, which remote control, from which device, you can purchase one, but capable of turning on and off absolutely all household appliances in your home. Such technical devices have long been in use, but many people are frightened by the fact that they do not know how to set up a universal remote control.

The difference between a conventional remote control for a certain type of equipment and a universal one is that inside a small plastic box there is a certain microcircuit that allows you to expand the memory of this device and write commands not to one receiver, but to several at once. Let's see how this can be done.

Where to begin?

If you don’t know how to set up a universal remote control for, and other home gadgets, then, first of all, you should look into the box from the purchased remote control. Most often there is a specific instruction that will help you figure out the configuration of this particular remote control.

On this piece of paper, which is an instruction, you can find codes with which even a person who does not know how to set up a universal remote control for a TV, music center or air conditioner can do it without any problems on their own.

Codes are four-digit combinations of numbers that correspond to a specific brand of household appliances. For each of them, several codes are provided, and in case of failure with the first set of numbers, you can try the following.

Active buttons

To set up a universal remote control, we need only a few buttons from the many located on the working surface. These are the TV, SET (or DVB) and POWER buttons. In addition, an important indicator when setting up the remote control will be the signal light, which is present on every universal remote control and is absent on a regular one.

Let's start setting up

There are several ways to set up your remote and if you fail with the first, you should go to the second and so on. The main thing is not to rush and understand the sequence of actions:

The same algorithm of actions should be carried out with all other household appliances that can be controlled using a multifunctional remote control.

A universal TV remote control may be needed for various reasons.

For example, to manage multiple screens or due to a breakdown of a branded device.

In this article, we will briefly and simply explain how to set up a universal remote and where to find the codes for the TV.

What is a universal remote

Sounds complicated, but it's actually a simple device that creates signal pulses suitable for most TVs and set-top boxes.

Huayu, Gal, DEXP, Supra are considered popular and high-quality manufacturers of UE.

The universal model is suitable for a large number of common and popular manufacturing companies, such as Samsung, LG or Philips.

Differences from a conventional remote control

The original remote control and the universal one have two significant differences that significantly increase the cost of the first - this is its "brand" and quality.

The remote control manufactured by the owner-manufacturer is undoubtedly better than the Chinese one. However, if the TV is already 5-6 years old, then you won’t be able to find a branded remote control for such an old model.

How to find out the TV code?

The code is required to be able to associate third-party devices with it. Among them are remotes, smartphones or tablets.

It provides recognition of devices and their correct operation. It consists of a unique set of numbers that can be recognized, as well as on the TV itself.

This will require:

sign in to YouTube;
open settings;
select the option to connect to the phone;
after entering the "Connect manually" section, a blue code will appear;
memorize it or write it down.

How to set up the universal remote control

Each device is accompanied by an instruction manual that describes in detail the setup process. We will consider the configuration of models of popular manufacturers.

Huayu

To set it up you will need:

turn on the TV, point the UE at it and hold down the power button and the “Set” button at the same time;
watch the indicator carefully, it should be on all the time;
use the volume control to set commands;
to exit the pairing mode, press the “Set” button.

Gal

Automatic adjustment:

turn on the TV, point the remote control at it;
hold the button indicating the type of device;
after the indicator lights up, release it;
press the power button on the UE, this will start the automatic search for the code;
as soon as the TV turns off, you must quickly press "OK", this will save the code in memory.

Sometimes the automatic search does not go well, so you need to configure it manually.

Manual adjustment:

after turning on the TV and pressing the “TV” button, the indicator will light up;
releasing it, enter the device code;
after entering the fourth digit, the code will be stored in the device's memory, and the screen will turn off.

DEXP

Auto tuning occurs according to the following algorithm:

turn on the TV, point the UE at it, press the button denoting the TV brand;
hold down the "Set" button and hold until the indicator lights up;
click on the channel search, the automatic search of codes will begin;
as soon as the indicator goes out, immediately press the "OK" button to save the found code.

If the button is pressed late, you will have to do everything again.

The advantage is that with the help of a search of channels, it is regulated in which direction the search will be performed.

Manual code entry must be started after pressing the “Set” button and the indicator lights up. Enter the found numbers and click OK. The remote control will remember the specified combination.

Supra

Automatic tuning algorithm:

turn on the TV, point the remote at it and hold the Power button, release after the indicator lights up;
after successful setup, the volume control bar will appear on the screen
turn off the device using the "Power" button.

Remote control manual setting:

find the code for your device in the previously mentioned article;
turn on the TV, point the UE at it, hold the Power button without releasing, enter the found code;
only after the indicator blinks twice - release the power button.

If, after setting up, the universal remote control does not work, contact the seller or the service center, there may be a marriage.

You must first double-check the codes and repeat the manipulations, sometimes mistakes are made during setup.

If you lose your TV remote control, you don't have to worry about it. There are always universal remote controls on sale, which, after a fairly simple procedure, will easily replace the original model. The process of connecting to the TV will take no more than 10-15 seconds. It is only important to know how to set up a universal remote control.

Device device

The design of the universal remote control is no different from the original models. Both types of devices have buttons for selecting channels, adjusting the sound, setting the timer, and others.

As a rule, both devices run on the same AA or AAA batteries. If you use one remote control for a large number of devices, then the batteries will have to be changed more often than in an ordinary model.

Some features of the internal device may determine which devices can be controlled and how to set up the universal remote. Gal LM p001, for example, has the ability to quickly connect to TV and SAT. Some other models do not have this feature.

Comparison of the original remote control with the universal one

There is no external difference between the two types of control devices. They differ only in the set of functions.

The first and main difference is that universal remotes can be connected to a large number of devices and devices. You can use them at the same time. For example, with one universal remote control, you can turn on a TV, air conditioner, music center and any other electrical unit that allows remote control. Also, the remote will allow you to control the functions of a home theater, satellite dish and cable TV.

In addition, the cost of the universal remote control is lower than the original model, and the service life is generally longer.

For owners of older TV models, such a universal device will be a salvation in case the original controller is lost. Original remote controls for previous years models are simply not produced.

Are they really versatile?

Any remote control can be used with different models of TVs, players and air conditioners. Of course, there are exceptions. For example, what should I do if I can't set up the universal remote? How can I check if it is suitable for this device model? First you need to look at the list of compatible models in the instructions for the remote control itself. If there are no instructions regarding this, and the connection cannot be established, the problem may be both in the remote control and in the TV.

The versatility of remote controls is determined by the fact that, unlike original devices that can be configured to work with only one device, they can simultaneously work with different devices from different manufacturers. In this case, they do not have to be reconfigured every time.

How to set up a universal remote

To establish a connection between a TV or other device and a universal remote control, follow these steps:

Turn on the remote and point it towards the device.
Simultaneously press the OK or SET button (depending on the remote control model) and hold for 3-5 seconds.
Enter the code corresponding to the device model.
Then press the TV button to make sure you are connected.

If for some reason the remote control did not connect to the TV, you need to do these steps again. You may have entered an incorrect device code.

There is another way to set up the Huayu Universal Remote. To connect such a device, you can use auto-search:

Turn on the device to be configured.
Press the SET button and then POWER.
Release the buttons at the same time.
Press the POWER button again and release.
Check if the sound volume symbol appears on the screen.
Press the SET button twice in succession.

Not all universal remote control models support the auto search function. It is also possible that the auto search function is not supported by the TV model itself. Therefore, for some cases, there is only one way to set up the LM P001 universal remote control - manually.

Some brands have a quick search feature. To connect in this way, you need to perform the following algorithm of actions:

Turn on the device you want to connect to.
Press and hold the TV button for a while.
Release the button when the power indicator lights up.
Press and hold the MUTE button.
When connected, release the button.
Checking the operation of the remote control is easy - just change the channel or adjust the sound.

If none of the methods fit and the code specified in the instructions did not work, you can use the last method - sequential enumeration of the code manually.

How to determine the TV code

Each device model has its own universal code that allows you to connect a remote control to it. It comes in three, four and five characters.

For example, to find out how to set up a universal remote control for Samsung, you need to look at the code information in the instructions for the TV or air conditioner.

It is important to remember that you need to enter the code of the connected device, and not the universal remote control.

Smartphones with universal remote function

Some of the newest brands of phones allow you to use them as a universal remote control. As a rule, they can only be connected to TVs with a SMART TV function.

To set up a universal remote control on your smartphone, you will need to download a special application and follow the installation instructions that will light up on the screen. With the help of the program, it will be possible to interact not only with the TV, but also with other devices that allow the remote control function.

This useful feature is available for a limited number of smartphones and TVs. To use your phone as a remote control, both devices must have a Wi-Fi module, an infrared port, or Bluetooth connectivity.

To date, the use of special devices to control televisions and other digital devices has become popular. It is for this that a remote control panel is always supplied with a certain technique, however, like any other device, such equipment can fail, in such a situation it is difficult to find a specific model of the remote control, which is why universal devices are used on Android and other operating systems. In this case, you will need to visually consider what a universal remote control for a TV is, and in addition, how to set up codes to control the corresponding device from a distance.

Any remote can fail.

Device device

Before considering the instructions for setting up the Huayu DVB remote control in conjunction with older TVs and more modern models, you will need to consider what the remote control for the Rexant RX 707e series TV is, namely its components:

First of all, the universal remote control for the Rexant RX 707e series TV, like other models, has a software module.
Additionally, this version of the devices is equipped with a special module for receiving and transmitting a signal.
The IRC and Huayu HR remote control, like other models, is equipped with a standard key layout and motherboard.
The x11l fixture and other versions have a stylish body made of high-quality plastic.
Such devices are equipped with a power module that supports conventional universal batteries.
Before considering how to connect and configure the TV 139 F universal remote control, it is necessary to highlight the presence of such a component as a memory unit.

In this video you will learn more about setting up the remote control:

All these components together give a device with which you can control not only various models of TVs, but also other equipment, including smart home improvement.

Important! The Huayu DVB t2 comes with a user manual, which you will need to read immediately before setting up this equipment.

How to set up a universal remote

If, after analyzing the situation, why the standard remote control of the device does not work, it was decided to purchase a universal model, then you have to consider how to properly adjust the receiver to the TV receiver. In practice, this situation is not particularly difficult. In this case, in general terms, the setting looks like this:

a full reset of the settings present in the accessory, installed from the factory, is preliminarily performed;
the next step is to transfer the device to the appropriate search mode or enter the code;
further, an automatic search for the encoding is carried out, or its full-fledged manual entry according to the instructions;
at the final stage, it is only necessary to apply everything necessary with appropriate confirmation.

Immediately after performing this series of actions, it is necessary to test the device for compatibility with the device by performing trial control from a certain allowable distance. During the setup process, the receiver module must be pointed towards the TV in order to receive and recognize the corresponding signal.

Important! In some cases, setting up and binding to equipment needs to be redone in case of combination with old versions of TVs or other electrical equipment.

Code definition

Each individual device has its own special code for remote control. In this case, to perform encoding, you need to know this parameter. To determine the encoding, you can do the following:

use the automatic search for the appropriate encoding directly in the settings;
find everything you need in the user manual for the television device;
find the required information about the codes on the official website of the manufacturer on the Internet;
download acceptable encodings on third-party resources on the Internet, if it is not available on the official website of the manufacturer.

Don't forget to define the code

In practice, with the search for the corresponding encoded value, a search may occur, due to which it is also possible to contact specialized repair centers for the corresponding devices.

Important! Here it is required to determine exactly the exact encoding so that all functions can be controlled from a distance without errors and failures present.

What is the difference between universal remotes and original remotes

All modern specialized devices differ significantly from the original models for controlling TVs. As a rule, the following main differences can be distinguished:

first of all, you should pay attention to the price (universal devices are many times more expensive);
unlike the original devices, the second option is easier to find in the public domain;
universal fixtures are suitable for use in conjunction with any electrical equipment;
the layout of the keys may differ significantly, and in addition, some parameters of the signal;
in addition, a serious difference lies in the need to program universal devices.

In this case, the main differences of this type of equipment are presented, however, in practice, you may encounter other nuances that have minor differences.

Setting up universal remote controls

This procedure can be performed in three different ways, depending on the unit and TV you are using, as follows:

Using manual encoding.
Automatic fixture alignment.
Pair devices without using a code.

In each individual situation, a certain procedure is provided for when setting up the corresponding equipment.

Manual

In this case, we are talking about the traditional use of encoded information, which is set directly through the remote control itself by entering a specific value after the device switches to a certain mode. Here you will need to correctly enter the required information with a certain interval when you press all the keys. In addition, the device itself is previously transferred to a special mode.

Automatic

To perform this option for adjusting the corresponding device, you only need to transfer the remote control to the settings mode, and then point it to the TV turned on and switched to a specific mode. Subsequently, pairing will be carried out, after which it will only be necessary to confirm these actions.

No code

If, for any reason, automatic and manual settings are not available, you will have to determine the compatibility of the devices, and then set the appropriate values on the remote control. It provides for the choice of the appropriate variant of equipment, the manufacturer of the device, and in addition the model of the device. Subsequently, as in previous cases, it remains only to make a confirmation.

Important! Any adjustment without fail ends with trial testing of the combined fixtures.

There are options without codes

Determination of TV codes

In order to encode the corresponding remote control, it will be necessary to correctly determine the code. As a rule, for this you need to have the following information:

First of all, it is necessary to clarify the manufacturer that produced the device used for television.
A specific model is also determined, namely all values and a special number (this is present on the device itself).
Separately, it is necessary to highlight the firmware version, and in addition, the immediate year of manufacture and assembly of the equipment.

All this information is necessary in order to correctly search for the encoding for the subsequent control of the device. As a rule, all old arrangement options do not have modern firmware or an operating system, which is why the combination and subsequent configuration here are somewhat more difficult than with new modern models.

Important! In practice, it is quite easy to search for the corresponding code, however, one should take into account the fact that specific models on sale may have a similar encoding.

Product specific settings

At the moment, there are various options for universal remote controls on sale. In general, the procedure for setting them up does not differ significantly, but here it will be necessary to consider in more detail the order of tuning such models as:

Remote controls IRC.
Huayu technique models.
Versions of technical equipment Gal.

In each individual case, there are some differences, which is why all options have to be considered in a separate order.

IRC

This is the most budgetary and popular version of programmable devices. As a rule, to perform the setting, the machine is put into a specific mode. Especially for this, the main key is pressed and a characteristic double blinking from the diode is expected. Subsequently, manual code entry or automatic encoding is performed. At the end, confirmation of actions and a trial test of the device are made.

Huayu

More expensive versions of technical equipment. These device options are compatible with any technique. Here, to configure, you need to reset the settings by holding the main key. Subsequently, the button is repeatedly held to switch to the mode. At the final stage, a search for an encoding or manual entry of a value with confirmation is performed.

Gal

Medium-priced equipment option, which is very popular. To configure this option, do the following. First go to settings mode. Next, confirm the data entry, find automatically or enter the code, and then save the changes. What should notify the double response of the diode.

Important! When making the appropriate settings, it is recommended to follow the order provided in the instructions that come with the equipment.