How to connect a universal remote control to a Sony TV. How to set up the remote control for another TV. All about remote control settings. How to remove conflict between remote control and TV

The Rostelecom remote control can be used to configure and control the set-top box and the TV itself, but before that you will need to configure it.

Rostelecom remote control diagram

The absolute majority of all buttons on the device are similar in functionality to any other television remote control. Although the company decided to abandon the four standard button colors - red, blue, green and yellow, which can be found on almost every model. So, in addition to numbers from 0 to 9, there are keys for turning on/off the TV and set-top box. The arrows are used to navigate the main menu. In addition, “left” calls up additional control tables, and when entering characters manually, it also erases extra letters and numbers.

You cannot do without buttons on the remote control that are responsible for returning to the last visited television channel. For example, after watching channel 25 you decided to watch channel 51, and by pressing this key you can go back to number 25. It is also possible to switch channels to adjacent ones: next and previous.

As with any remote control, there are buttons for pause, play, rewind and forward. The device is convenient for viewing and managing recordings. The sound is controlled by buttons to increase/decrease it, as well as reset and return to the previous level.

Other functions of the Rostelecom remote control include canceling the last action taken, switching to the “Audio” or “Video” mode, setting “ Interactive television", changing the viewing mode in the device menu, confirming the selection and calling additional settings panels when watching TV.

Setting up the remote control according to the manufacturer's code

Important note: the TV must be turned on during selection!

Setting algorithm:

Automatic setup

You can also configure the Rostelecom remote control by searching through the codes in automatic mode. So, to do this you should do the following operations:

1. Press and hold the buttons simultaneously for two seconds TV + OK to enter the remote control programming mode. The change will be indicated twice by the LED on the device.
2. Dial the three-digit code on the remote control - 991 . This gives rise to the selection of the optimal combination of device and numeric dialing.
3. Press buttons to switch TV channels. Each time you press, the TV will select one of the codes in the database and give a command to turn off.
4. When the device turns off after pressing CH+ again, press OK. The operation will help maintain the combination suitable for the job. Successful storage of a four-digit code is usually indicated by the LED on the remote control blinking twice. This completes the TV setup algorithm.

How to reset settings

If you need to reset the settings, you must do the following:

1. Press and hold the above buttons TV and OK until the LED on the first one blinks twice. Thus, the gadget begins to function in a new mode.
2. When the remote control enters it, you need to enter 997 . Correct entry will be reflected by the diode located on the POWER button flashing four times. After this, all previously existing settings will be deleted.

Resolving a Hardware Conflict

What is meant by this concept? There are often cases when one button of the Rostelecom remote control can give signals to both the TV and the set-top box. In this case, the digital codes for the two devices most likely matched. Allow this problem it is possible by changing the initially set numerical combination. After all, the operation of the set-top box and TV depends on these codes.

This problem can be resolved as follows:

1. Connect the set-top box.
2. Point the remote control at the device and press OK+Power. Hold both buttons until TV flashes twice. This will allow you to start working in system programming mode.
3. Manually enter one of the listed codes – 3220-3224. After this, the new combination is installed.
4. Afterwards, you must make sure that the conflict is resolved. You should check the operation of all those buttons that previously caused the operation of two devices at once. The situation has not changed? Then you need to select some other numeric code and repeat the described steps.

As you can see, setting up the remote control from Rostelecom is very simple. After reading this instruction, you can carry out the necessary operations yourself. If all points are strictly followed, the setup should not cause any problems.

To control TV equipment from a distance, equipment manufacturers try to equip the device with a remote control. In some cases you have to buy Universal remote for the TV to perform such actions. What this device is and the differences from the original version is discussed further in the article.

In order for the Smart TV to receive high-quality images, you must use the function digital television. In most cases, a special receiver attachment is used to connect such equipment. In this case, the user has two devices at once for remote control.

Not many people like having an additional remote control, and therefore users try to get rid of the unnecessary old one so that it does not clutter up the space inside the room. For this purpose, you need to purchase a special universal remote control, which will replace two remote controls at once - to control the TV and the set-top box.

Despite the development modern technologies, PU has remained unchanged for many years. It may differ slightly in shape, but the design remains the same - electronic circuit, Availability large quantity buttons and plastic housing with LEDs. Also, the equipment must include a power source - batteries.

The universal remote control has the same functionality as the standard version, but it will have to be configured in such a way that unnecessary remote controls remain unused.

Many users are interested in the question: “can any remote control become universal for all TVs?” The answer is simple - no, not any. Externally, the remote control units will be very similar, but the filling is slightly different for the universal sample.
Having purchased a universal remote control, you need to look for codes for the desired TV models and configure the remote control to manipulate several devices.

Top 3 best universal remotes

1. REXANT 38-0011.
2. Vivanco UR 2.
3. One For All URC 6810 TV Zapper

The difference between the original and universal remote control

If a set-top box is used in the house, for example, Tricolor TV or Dom RU, then the remote control for these equipment itself is useless without a corresponding pair - from the TV.

The operating principle of any remote control consists of three main actions:

1. When the user presses a certain key, the desired microcircuit is activated, and the electrical impulse is transmitted to the TV.
2. The signal is transmitted thanks to an LED, which receives a certain command and sends an impulse to the TV with which it is paired.
3. Every TV has a phototransistor. It receives an infrared signal from the control unit and converts it into an electrical impulse, which is sent to the control unit. As a result, the TV responds to the perfect command.

To control the TV from the remote control, a special communication method is used, which is called PCM. This principle is also called a pulse walking modulator.

The peculiarity of the equipment is that for each command from the remote control a three-digit code is assigned, for example:

• 000 – deactivate the TV;
• 001 – switch to the next channel;
• 010 – return to the previous channel;
• 011 – turn up the volume. 100 – reduce volume;
• 111 – activate TV equipment.

From this we can conclude that when you press the remote control key, the installed electronic circuit inside the control unit activates an infrared diode, which will work according to a certain pattern: "111" - ON, ON, ON.

The signal length will be interrupted in standard steps of a few milliseconds. When adjusting the volume, the code “011” is used. This means that the diode will perform three such actions at once, but with a certain delay: it will deactivate, turn off, and then turn on again.

You can find several types of remote controls in stores:

• original;
• universal;
• unoriginal.

Non-original and original control units are designed to control certain TV models. The difference between them is that the original version goes on sale along with a specific TV, and a non-original version is bought to replace a damaged or lost model.

A universal control panel, it can be programmed according to the instructions for a specific TV, it is suitable for different options. It is recommended to connect the equipment to the TV if the original control panel is lost or broken.

UPDUs vary in shape, color, size and design. The user will have the opportunity to choose depending on his preferences. Built inside the equipment special program, consisting of several codes that match the signal of each TV device. For correct settings You will need to know this code in advance.

How to set up a universal remote control

To activate the universal control unit, you need to power it by placing it in the appropriate connector correct type batteries. Some remote controls do not come with batteries, and you will have to purchase them.
Helpful advice: It is advisable to purchase non-AAA batteries, rechargeable cells that can be charged many times. This will save a lot of money. Together with the nutrient cell, they sell a special slot where they can be installed for recharging. To carry out the operation, you will need to connect the device to the electrical network at home.

As soon as the universal remote control is powered up, you can proceed to the operation of pairing with Smart TV TV. On the remote control, you need to select the appropriate mode: TV, DVD or Audio(some models have other parameters).

You can watch the remote control settings in the video below, but for each specific case we will look at the settings manually and automatically.

To connect to a TV device you need to use the “TV” button. To activate, you need to hold down the key for about 3 seconds and wait until the indicator on the front control panel lights up.

Next, you should enter a specific code from the model of your TV equipment. To find out this parameter, you will need to study the operating instructions.
There are several ways to set up a universal remote control for your TV - manual and automatic.

Manually

As mentioned above, for each TV unit there is a specific pairing code, which is necessary for fine-tuning the universal control unit.

After its introduction, you need to perform a certain procedure.

Setting up a universal remote control for your TV:

1. For the Supra remote control, point the remote control directly at the TV and hold down the Power button, after which a window will appear where you will need to enter the code from the device. If the numbers are entered correctly, the LED will blink several times. At this point, you can release the Power key.
2. For the Huayu universal remote control, you need to hold down the Set and Power buttons at the same time. You must wait until the LED starts flashing. Next you will need to enter a 4-digit code. After the diode goes out, you must press the Set button.
3. For the universal Beeline PU, you should activate the “TV” button and simultaneously press Setup and C.

After installation is complete, the device will blink several times. This is a sign that the keys can be released. To check the functionality of the equipment, you need to increase the volume of the TV. It is important to note that if you do not enter the code after certain time(60 seconds), then all settings will have to be made again.

Automatically

To configure the remote control in automatic mode, you need to press a combination of four nines on the remote control button panel without removing your finger from the “9” key. If everything is done correctly, the TV will be deactivated.

After this, automatic selection of channels will begin. The operation may take approximately 15 minutes. This option is used if the user does not have a code to configure the universal remote control.

How to set up a universal TV remote:

1. For the Supra remote control, you need to turn on the TV, point the remote control directly at it, and hold down the Power button for 6 seconds. The LED should light up. If the TV device responds to a decrease or increase in sound, then the setup in automatic mode was successful.
2. On the Huayu control panel, you need to hold down the Set button and immediately after it Power. It is important to do the operation correctly - the keys are not activated simultaneously, but with a short interval. After this, you can release the digs. Press Power again. Make sure that the volume level appears on the TV device screen. To exit the program, you will need to click the Set key several times.
3. There is a third setting option that can be used for universal remote controls. The television receiver, as in previous cases, should be turned on. Next, press the “TV” button and hold it until the LED starts to light (on some models it may start blinking). Hold down the Mute button to start searching. At the end of the process, you need to activate any key of the universal control panel and make sure that the TV unit responds to commands.

Universal remote control codes

To set up a universal control unit, you need to know a specific number from a specific brand of TV device. Codes for universal TV remote controls are written in the device data sheet. Information is also available on the manufacturer's official website. There is a table of codes with the correct meanings.

It doesn’t matter what kind of TV the remote control is from (Samsung, Philips, Toshiba, Panasonic or other popular brands), you won’t be able to set up the equipment without the appropriate code. Therefore, before purchasing, it is advisable to find out all the available information about the TV and the control unit.
Using a universal remote control is easy - point at the TV and press the desired key. Everything is the same as with a standard remote control.

Appearance of the remote control

Remote control capabilities

A universal remote control (RC) is a universal device that can replace two remote controls, namely, with the help of this remote control you can control a set-top box (STB) and a television (TV).

Important information about the remote control

Initially, the remote control is configured to control a set-top box (STB), and when batteries are installed, it starts working in HUMAX HD7000 mode (code 2222).

Switching to TV mode is done by pressing the TV button. When switching to TV mode, the red indicator will blink 1 time. In TV mode, the on/off button, number buttons, volume control buttons, channel switching buttons, menu buttons, navigation buttons, as well as the signal source selection button (SOURCE) work. The default mode is Samsung TV. In Table 1 you can find codes for setting up compatibility of other brands of TV manufacturers.

Switching back to STB mode is done by pressing the STB button. When switching to STB mode, the green indicator will blink 1 time.

How to set up the remote control to work with a TV set-top box

1.Press and hold the STB button until the indicator turns green.

2.Enter the four-digit code of the TV set-top box from the corresponding table.

3.Make sure the indicator flashes green 2 times briefly. If there is an error, the indicator will flash green once long.

How to set up the remote control to work with your TV

1.Press and hold the TV button until the indicator turns red.

2.Enter the four-digit TV code.

3.Make sure the indicator flashes red 2 times briefly. If there is an error, the indicator will flash red once long.

Table 1. List of popular TV manufacturers and corresponding codes for remote control

Codes for selecting a TV set-top box

The list of supported models of TV set-top boxes and setup codes for them are given in Table 2.

Table 2. List of supported models of TV set-top boxes with remote control setup codes

Features of the remote control with TV set-top boxes

Some models of set-top boxes have limited support for functionality, so when you press certain buttons on the remote control, the set-top boxes will either not perform any action or will duplicate the actions caused by other buttons on the remote control. A complete list of functions of the remote control buttons, depending on the model of the TV set-top box, is given in Table 3.

Table 3. List of functional assignments of remote control buttons in TV set-top box mode.

How to reset the remote control settings

Return to default settings:

1. Press and hold both STB and TV buttons pressed for 5 seconds.

2. Make sure the indicator flashes 4 times with both colors at once (orange color visible).

How to switch the remote control to control a TV set-top box

To switch the remote control to the set-top box, press the STB button.

How to switch the remote control to control the TV

To switch the remote control to the TV, press the TV button.

Troubleshooting

If nothing happens when you press the remote control keys or an action is performed that does not correspond to the button pressed, follow these steps before contacting support:

Check whether the devices are connected to the power supply?

Check if devices are turned on?

Check if the batteries are installed correctly?

Install new alkaline batteries.

If nothing helps, or you have tried all the codes, you should contact the Dom.ru service center.

How to set up a universal remote control? All universal remote controls for TVs, players, air conditioners, barriers and gates work on the same principle. Each button of such a remote control, when pressed, can generate a code for a certain sequence of IR pulses of the remote control, one code out of many.
Codes for remote controls are stored in non-volatile memory.

The question of how to set up a universal remote control comes down to choosing from a variety of codes one that corresponds specifically to your TV, barrier or other device.

Codes for universal TV remotes

Universal remote control for a TV, how to set up codes: the table shows the setup codes for a universal remote control for TVs and other equipment.

Table: Universal remote control setup codes	TV brand	Code	TV brand
Code	0072	Aiwa remote control setup code	0074
Akai remote control code	0083	Akura remote control code	0089
Alcatel remote control setup code	0221	Astra remote control setup code	0390
Blaupunkt remote control code	0337	BBK remote control code	0346
Beko remote control code	0359	BenQ remote control code	0581
Clatronic remote control setup code	0627	Condor remote control setup code	0658
Crown remote setting code	4032	Cameron remote setup code	0499
Casio remote setup code	3531	Electrotech remote control setup code	0895
Elekta remote control setup code	0692	Daewoo remote control code	1004
Finlux remote control setup code	1056	Funai remote control code	1162
Grundig remote control setup code	1140	GoldStar remote control code	1152
Graetz remote control code	1249	Hisense remote setup code	1251
Hitachi remote control code	1252	Hitachi Fujian remote control setup code	1175
Haier remote control setting code	1406	ITT remote control code	1407
ITT Nokia remote control code	1480	Kansai remote control setup code	1500
Kendo remote control code	1547	Konig remote control code	1548

Konka remote control code	1464	JVC remote setting code	1628
LG remote control code	1660	Loewe remote control code	1855
Mitsubishi remote control setting code	1709	Magnum remote control setup code	1724
Marantz remote setup code	1731	Mark remote control code	1838
Minerva remote control setup code	1942	National remote control code	2022
NEC remote control code	1950	Nokia remote setup code	2017
Onwa remote control setup code	2087	Orson remote control code	2115
Orion remote control code	2111	Panasonic remote control code	2153
Palladium remote control code	2145	Patriot remote control code	2170
Philips remote control code	2195	Pioneer remote control code	2212
Recor remote setup code	2359	Red Star remote control code	2366
Saba remote control code	2429	Satford remote control code	2483
Sharp remote control code	2550	Shivaki remote control setup code	2567
Siemens remote control setup code	2574	Siesta remote control setup code	2577
Spectra remote control code	2697	Supra remote control code	2792
Samsung remote control setup code	2448	Sanyo remote control setup code	2462
Sony remote control code	2679	Telefunken remote control setup code	2914
Thomson remote control code	2972	Toshiba remote control setup code	3021
Videoton remote control code	3174	Xbox remote setup code	3295

Universal TV remote control

Some of the most common universal remote controls produced by Philips are models SRP2008B/86, SRP3004/53, SRP4004/53.

Let's consider universal remote control Philips 2008B/86, which allows you to control TVs, satellite receivers and cable television. It is also a universal remote control for DVD players, Blu-Ray players, VCRs and other devices.

1 - LED indicator lights up when a command is transmitted from the universal remote control.
2 - switching external inputs of configurable equipment
3 - block of buttons for selecting a device: TV, receiver, player, etc.
4 - block of Menu cursors and universal remote control buttons GUID, INFO, EXIT.
5 - volume control and channel switching buttons
6 - block of teletext buttons and digital recording and playback functions.
7 - additional buttons for screen mode, teletext, and entering channel numbers on the universal remote control.
8 - digital buttons for directly entering the channel number or playback track.
9 - button to turn the device on and off from the remote control.

Manually setting up a universal remote control to control your TV

You need to turn on the TV using the buttons on its front panel and set channel No. 1.

Press and hold the TV device selection button from button block 3 on the universal remote control. You must hold the button pressed for 5 seconds until indicator 1 lights up.

Find the brand code of the TV you are setting up (a sequence of four digits) and enter it using the buttons of block 8. If the red indicator goes out, it means the code was entered incorrectly and you should enter it again.

You need to point the universal remote control at the TV and hold down button 9 until the TV turns off, and immediately release the button. It takes about one minute to complete the action.
Press the TV mode button twice to exit
from setup mode.

Automatically set up a universal remote control to control your TV

Enable the device being configured.
Select TV mode on the universal remote control.
Enter code 9999. The universal remote control will begin an automatic search from the database. The search may take about 15 minutes.
In this case, you must keep button 9 pressed all the time and release it immediately when you turn off the TV.

You can download it on our website
location and designation of remote control buttons, as well as instructions and

First of all, it should be noted that universal remote control cannot become a full replacement for the standard one. There are several reasons for this conclusion:

1. The need to configure a universal remote control- setting up a code suitable for your equipment
2. Resetting the remote control when replacing batteries- the need to periodically replace the batteries of the universal remote control will lead to the need to re-configure it
3. Icon mismatch- the graphic designation of the buttons on the universal remote control does not always coincide with its functions.
4. Lack of a number of functions- adjusting the volume, changing channels and turning off the TV are the most commonly used remote control buttons.
5. However, the functionality of these buttons does not guarantee the ability to use absolutely all functions provided on the standard device. Unable to connect

- yes, unfortunately, the universal remote control may not fit your receiver, player or TV at all.
Therefore, if the remote control fails, you should not rush to purchase a universal remote control. Affordable Chinese analogues are, of course, inferior to branded remote controls in terms of durability, but they do not have the disadvantages listed above.

However, it is often impossible to purchase a similar remote control. In this case, a universal remote control can help out.

How to set up a universal remote control How to set up a universal remote control for your TV

1. ? How to set up a universal remote control for an air conditioner, gate or other equipment? You can do this in one of two ways:- each brand of equipment has its own encryption code for the buttons of the universal remote control. It is enough to enter a certain digital sequence so that the universal remote control is configured for a particular brand of equipment.
2. Automatic search code- in this case, the universal remote control slowly cycles through various hardware encodings. If the user detects an impact, for example, turning off the TV, it is necessary to press a certain button, disabling the automatic code search mode. The last code will be saved in the memory of the universal remote control and will be used for control.

Answers to questions about universal remote controls

How to dial channel with a two-digit number on the Telefunken RC 1 for 6 universal remote control

I use the Telefunken rc universal 1 for 6 universal remote control for my Panasonic TV. It’s clear how to dial channels up to 9, but if I need channel 10, which button should I press?

For the convenience of watching television on multiple screens, users purchase a universal control device. However, most people face the problem of setting it up. How to set up a universal remote control for your TV? Debugging the device will not take much time, but will allow you to conveniently and easily watch several TVs at the same time

What is a universal remote control

A universal remote control (UPRC) is a small, simple-looking device. Contains a microcircuit inside that allows you to generate signals of different pulses simultaneously.

There are quite a lot of UPDU models on the market, which differ in configurations, prices, appearance and control codes. The most popular models are Supra, Huayu, Beeline.

Codes for setting up a universal remote control for use with a specific TV can be found in the document below.

The algorithm for connecting the PU to set-top boxes of an older model is no different. No need to look for how to set up a universal remote control for a Samsung TV, or find out service centers, how to set up a universal remote control for an LG TV, since the process of adapting the remote control to the equipment does not depend in any way on the manufacturer of the receiver.

How to set up a universal remote control

Each of the UDPU models has its own pairing algorithm, which is indicated in the operating instructions. Below we will discuss algorithms for connecting remote control systems from popular manufacturing companies.

Supra

This device is a popular model for adjustment Samsung TVs, LG, Philips and other models of TV signal receivers. The installation algorithm for Smart TV and older models is the same.

Automatic setup

Adjust the device remote control quickly and conveniently. The process of automatic debugging of the UDPU with the receiver is as follows:

1. Connect the screen to the network.
2. The remote control needs to be pointed at the TV.
3. Press the “POWER” button for 6 seconds until the indicator on the UDPU lights up.
4. When pairing is successful, the volume icon will appear on the screen. Press the POWER button once.
5. The UDPU is ready for use; you need to check its functionality.

Manual adjustment

If the described method of adjusting the Supra did not help, and you still cannot control the television through the remote control, there is also manual adjustment of the universal remote control for the TV:

1. Select the code corresponding to the model of the TV signal receiver.
2. We connect the TV to the network.
3. We point the remote control directly at the screen.
4. Press “POWER” and enter the code found earlier.
5. Do not release “POWER” until the indicator flashes twice.
6. We try to check each of the buttons on the remote control. If some of them do not work, then you will need to find another code.

HUAYU

This remote control can be paired with any TV, be it an old Philips or the latest model Samsung. The process of pairing with the screen is the same:

1. We press the “POWER” and “SET” buttons on HUAYU, which enters the UDPU into programming mode. When the equipment is paired, the indicator on the remote control device will be constantly lit.
2. The command is set by the “VOL” button.
3. You can exit the setup mode with the “SET” button.

Remote control devices from this manufacturer are suitable for controlling LCD and LED TVs. This scheme is suitable for setting up remote controls from Unimak, which are also quite common among remote control buyers.

Beeline

Early models of remote control devices from this company had many shortcomings, since they could only be connected if the user had a special set-top box. Also, the remote control did not have a “SETUP” button. However, Beeline corrected itself and released an improved version of remote control equipment. The PU decreased in size, but acquired large quantity function buttons.

To pair the Beeline remote control with the signal receiver, you will need to follow the following step-by-step instructions:

1. Turn on TV.
2. Press the “C” and “SETUP” buttons.
3. We are waiting for the initialization to complete.
4. When the indicator blinks twice, the buttons can be released.
5. You can check the functionality of the device using the “VOL” button.

Each of the remote controls has its own configuration algorithm, which should be described in detail in the operating instructions included in the kit.